ARINC 602B-2012 TEST EQUIPMENT GUIDANCE.pdf

《ARINC 602B-2012 TEST EQUIPMENT GUIDANCE.pdf》由会员分享，可在线阅读，更多相关《ARINC 602B-2012 TEST EQUIPMENT GUIDANCE.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、 AN DOCUMENT Prepared by AMC Published by AERONAUTICAL RADIO, INC. 2551 RIVA ROAD, ANNAPOLIS, MARYLAND 21401-7435 TEST EQUIPMENT GUIDANCE ARINC REPORT 602B PUBLISHED: June 18, 2012 This document is published information as defined by 15 CFR Section 734.7 of the Export Administration Regulations (EAR

2、). As publicly available technology under 15 CFR 74.3(b)(3), it is not subject to the EAR and does not have an ECCN. It may be exported without an export license. DISCLAIMER THIS DOCUMENT IS BASED ON MATERIAL SUBMITTED BY VARIOUS PARTICIPANTS DURING THE DRAFTING PROCESS. NEITHER AEEC, AMC, FSEMC NOR

3、 ARINC HAS MADE ANY DETERMINATION WHETHER THESE MATERIALS COULD BE SUBJECT TO VALID CLAIMS OF PATENT, COPYRIGHT OR OTHER PROPRIETARY RIGHTS BY THIRD PARTIES, AND NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, IS MADE IN THIS REGARD. ARINC INDUSTRY ACTIVITIES USES REASONABLE EFFORTS TO DEVELOP AN

4、D MAINTAIN THESE DOCUMENTS. HOWEVER, NO CERTIFICATION OR WARRANTY IS MADE AS TO THE TECHNICAL ACCURACY OR SUFFICIENCY OF THE DOCUMENTS, THE ADEQUACY, MERCHANTABILITY, FITNESS FOR INTENDED PURPOSE OR SAFETY OF ANY PRODUCTS, COMPONENTS, OR SYSTEMS DESIGNED, TESTED, RATED, INSTALLED OR OPERATED IN ACCO

5、RDANCE WITH ANY ASPECT OF THIS DOCUMENT OR THE ABSENCE OF RISK OR HAZARD ASSOCIATED WITH SUCH PRODUCTS, COMPONENTS, OR SYSTEMS. THE USER OF THIS DOCUMENT ACKNOWLEDGES THAT IT SHALL BE SOLELY RESPONSIBLE FOR ANY LOSS, CLAIM OR DAMAGE THAT IT MAY INCUR IN CONNECTION WITH ITS USE OF OR RELIANCE ON THIS

6、 DOCUMENT, AND SHALL HOLD ARINC, AEEC, AMC, FSEMC AND ANY PARTY THAT PARTICIPATED IN THE DRAFTING OF THE DOCUMENT HARMLESS AGAINST ANY CLAIM ARISING FROM ITS USE OF THE STANDARD. THE USE IN THIS DOCUMENT OF ANY TERM, SUCH AS SHALL OR MUST, IS NOT INTENDED TO AFFECT THE STATUS OF THIS DOCUMENT AS A V

7、OLUNTARY STANDARD OR IN ANY WAY TO MODIFY THE ABOVE DISCLAIMER. NOTHING HEREIN SHALL BE DEEMED TO REQUIRE ANY PROVIDER OF EQUIPMENT TO INCORPORATE ANY ELEMENT OF THIS STANDARD IN ITS PRODUCT. HOWEVER, VENDORS WHICH REPRESENT THAT THEIR PRODUCTS ARE COMPLIANT WITH THIS STANDARD SHALL BE DEEMED ALSO T

8、O HAVE REPRESENTED THAT THEIR PRODUCTS CONTAIN OR CONFORM TO THE FEATURES THAT ARE DESCRIBED AS MUST OR SHALL IN THE STANDARD. ANY USE OF OR RELIANCE ON THIS DOCUMENT SHALL CONSTITUTE AN ACCEPTANCE THEREOF “AS IS” AND BE SUBJECT TO THIS DISCLAIMER. 2012 BY AERONAUTICAL RADIO, INC. 2551 RIVA ROAD ANN

9、APOLIS, MARYLAND 21401-7435 USA Prepared by the AMC Report 602B Adopted by the AMC Steering Group April 29, 2012 ARINC REPORT 602B TEST EQUIPMENT GUIDANCE Published: June 18, 2012ii FOREWORD Aeronautical Radio, Inc., the AEEC, and ARINC Standards ARINC organizes aviation industry committees and part

10、icipates in related industry activities that benefit aviation at large by providing technical leadership and guidance. These activities directly support aviation industry goals: promote safety, efficiency, regularity, and cost-effectiveness in aircraft operations. ARINC Industry Activities organizes

11、 and provides the secretariat for international aviation organizations (AEEC, AMC, FSEMC) which coordinate the work of aviation industry technical professionals and lead the development of technical standards for airborne electronic equipment, aircraft maintenance equipment and practices, and flight

12、 simulator equipment used in commercial, military, and business aviation. The AEEC, AMC, and FSEMC develop consensus-based, voluntary standards that are published by ARINC and are known as ARINC Standards. The use of ARINC Standards results in substantial technical and economic benefit to the aviati

13、on industry. There are three classes of ARINC Standards: a) ARINC Characteristics Define the form, fit, function, and interfaces of avionics and other airline electronic equipment. ARINC Characteristics indicate to prospective manufacturers of airline electronic equipment the considered and coordina

14、ted opinion of the airline technical community concerning the requisites of new equipment including standardized physical and electrical characteristics to foster interchangeability and competition. b) ARINC Specifications Are principally used to define either the physical packaging or mounting of a

15、vionics equipment, data communication standards, or a high-level computer language. c) ARINC Reports Provide guidelines or general information found by the airlines to be good practices, often related to avionics maintenance and support. The release of an ARINC Standard does not obligate any organiz

16、ation or ARINC to purchase equipment so described, nor does it establish or indicate recognition or the existence of an operational requirement for such equipment, nor does it constitute endorsement of any manufacturers product designed or built to meet the ARINC Standard. In order to facilitate the

17、 continuous product improvement of this ARINC Standard, two items are included in the back of this volume: An Errata Report solicits any corrections to existing text or diagrams that may be included in a future Supplement to this ARINC Standard. An ARINC IA Project Initiation/Modification (APIM) for

18、m solicits any proposals for the addition of technical material to this ARINC Standard. ARINC REPORT 602B TABLE OF CONTENTS iii 1.0 INTRODUCTION . 1 1.1 Purpose 1 1.2 Objectives/Scope . 1 1.3 Related Documents . 2 2.0 ROLES AND RESPONSIBILITIES 3 2.1 Airframe Manufacturer . 3 2.2 Component Manufactu

19、rer 3 2.3 TE Manufacturer 3 2.4 TE User 4 2.5 Contractual Roles and Responsibilities . 4 3.0 TE CATEGORIES 5 3.1 General 5 3.2 TE Intended Area of Use . 5 3.2.1 Shop TE 5 3.2.2 Flight Line TE 5 3.3 Basic TE Controls and Interfaces 5 3.3.1 Manual TE . 5 3.3.2 Semi-Automatic TE . 5 3.3.3 Automatic TE

20、. 5 3.3.4 Wrap-Around TE . 6 3.4 TE Applications 6 3.4.1 Dedicated TE . 6 3.4.2 Multi-System TE 6 3.4.3 Integration/Simulation TE 6 3.4.4 General Purpose TE 6 3.5 TE Using Aircraft Components 6 3.5.1 LRU as Part of the Test Solution . 7 3.5.2 Using an LRU to Test an SRU 7 4.0 TEST EQUIPMENT REQUIREM

21、ENTS 8 4.1 Design Requirement Considerations . 8 4.1.1 Conformity to Regulations . 8 4.1.2 TE Operating Environment Classification 8 4.1.2.1 Class 1 8 4.1.2.2 Class 2 9 4.1.2.3 Class 3 9 4.1.2.4 Class 4 9 4.1.3 COTS Considerations . 9 4.1.4 Cal/No-Cal Decision 10 4.1.4.1 Limited Calibration (also Li

22、mited Verification) 10 4.1.5 Aircraft Components in TE 10 4.2 Design Process Considerations . 11 4.3 Test Implementation Considerations . 13 4.3.1 Test Resources . 13 4.3.1.1 Test Resource Selection 13 4.3.2 Test System Software . 13 4.3.2.1 Operating System . 14 4.3.2.1.1 Operating System Obsolesce

23、nce 15 4.3.2.2 System Diagnostics 15 4.3.2.3 Test Instrument/Driver Layer 15 4.3.2.3.1 Test Instrument/Driver Layer Obsolescence Management 15 ARINC REPORT 602B TABLE OF CONTENTS iv 4.3.2.4 Test Executive Characteristics . 15 4.3.2.5 Software Expandability and Modularity. 16 4.3.3 Test Program . 16

24、4.3.3.1 Test Program Structure 16 4.3.3.2 Test Program Documentation . 17 4.3.3.3 Test Program Delivery 17 4.3.3.4 Test Program Maintenance 17 4.3.3.5 UUT Test Software . 17 4.3.4 Operator Interface . 17 4.3.5 Recording of Test Results . 18 4.3.6 Safety Considerations . 18 4.4 TE Documentation . 18

25、4.4.1 Description and Operation . 18 4.4.2 System Block Diagram and Schematics . 19 4.4.3 Safety Consideration . 19 4.4.4 Maintenance Procedures 19 4.4.5 Fault Isolation 19 4.4.6 Calibration Procedures 20 4.4.7 Illustrated Parts List . 20 4.4.8 Installation and Removal . 20 4.4.9 Facility Requiremen

26、ts 21 4.4.10 Storage and Shipping 21 4.4.11 Manuals for COTS Hardware and Software 21 4.4.12 System Administration . 21 4.4.13 Documentation Revision Control . 22 4.4.14 Software Backups . 22 4.4.15 Software Distribution . 22 4.4.16 Archive 22 4.4.17 Data Integrity . 22 5.0 METROLOGICAL PROCESS 23 5

27、.1 General 23 5.2 Evaluation 24 5.3 Calibration 24 5.4 Verification . 24 5.5 Adjustment . 25 5.6 Record Keeping . 25 ATTACHMENTS ATTACHMENT 1 DEFINITIONS/ABBREVIATIONS 26 ATTACHMENT 2 CALIBRATION DECISION GUIDE (REFERENCE SECTION 4.1.4) . 30 FIGURES FIGURE 1 - TE PRODUCT SUPPORT . 1 FIGURE 2 - TE DE

28、SIGN PHASE OF THE LIFECYCLE . 11 FIGURE 3 - TEST SYSTEM SOFTWARE HIERARCHY 14 ARINC REPORT 602B Page 1 1.0 INTRODUCTION 1.0 INTRODUCTION 1.1 Purpose This standard is intended to give a general overview and design requirements regarding Test Equipment (TE) to the component manufacturers and the TE in

29、dustry from the airline perspective. This standard is one of a family of ARINC Standards which address component test and maintenance processes. These standards have been developed to provide the best practices to the air transport industry. This standard, which was first published in May 1981, has

30、been updated to reflect the collective experience of the air transport industry over many years to account for the changing aviation technology and regulatory environment. It is not intended that this standard provide the elements of a “form, fit, and function“ specification, but to provide guidance

31、 for a better design and operation of testers. Todays test equipment designs are typically of modular nature, i.e., the test equipment manufacturer generally selects and integrates subassemblies from the marketplace. This standard will help to ensure that critical product life cycle requirements reg

32、arding design, support, and obsolescence management are identified and available to all. An industrial constellation of more or less decoupled support elements has to be transformed into a scenario with sufficient overlap of critical functions. This will facilitate successful and cost-effective supp

33、ort over the product life cycle. Figure 1 - TE Product Support 1.2 Objectives/Scope This standard provides considerations for the procurement and design requirements of TE to be used for maintenance and troubleshooting of air transport components in both the shop and/or flight line environment. Alth

34、ough the term TE is used, this standard can be applied to other types of support equipment utilized in the aviation industry, such as shop data loaders, portable maintenance aids, etc. ARINC REPORT 602B Page 2 1.0 INTRODUCTION 1.3 Related Documents In all cases, it is intended that the latest versio

35、ns of the referenced documents apply, as well as the sources of the terms and definitions used in this ARINC Report. The reader should ensure that the most current versions of all documents, websites, and contacts are referenced. ARINC Report 625: Industry Guide for Component Test Development and Ma

36、nagement ARINC Report 663: Data Requirements for Avionics Component Maintenance ARINC Report 666: Electronic Distribution of Software ARINC Report 668: Guidance for Tool and Test Equipment (TTE) Equivalency ARINC Report 827: Electronic Distribution of Software by Crate ATA Specification 101: Ground

37、Equipment Technical Data ATA iSpec 2200: Information Standards for Aviation Maintenance ATA WASG World Airlines and Suppliers Guide IEEE Standard 100 Standard Dictionary of Electrical and Electronic Terms ARINC REPORT 602B Page 3 2.0 ROLES AND RESPONSIBILITIES 2.0 ROLES AND RESPONSIBILITIES This sec

38、tion clarifies the roles and responsibilities of each part of the aviation industry involved. Any given organization could include some or all of the roles and responsibility identified below. For example, the component manufacturer could be the TE manufacturer, so it must assume the responsibility

39、of both. The airframe manufacturer could encompass all the roles. 2.1 Airframe Manufacturer The airframe manufacturer is responsible for identifying and ensuring the availability of test and support equipment needed to support the airplane and its components. In the event that major systems or any c

40、omponent is provided by a supplier selected by the Airframe manufacturer, it is the Airframe Manufacturers responsibility to ensure that their Suppliers are prepared to support the airline operators needs for test and support equipment required for that Suppliers product. This equipment may be ident

41、ified in the Suppliers CMM, Component Service Bulletin, or other type of Manufacturers Service Documents. 2.2 Component Manufacturer It is the component manufacturers responsibility to ensure that the TE specified in the Maintenance Service Document (MSD), e.g., CMM, is available, procurable, and to

42、 provide test information that will enable a TE manufacturer or user to design a test implementation of their choice. ARINC Report 625 provides guidance to support this process. It is the role of the component or system manufacturer to provide adequate information on proprietary interfaces or aircra

43、ft parts to correctly specify input/output parameters and signal descriptions to be applied to the Unit Under Test (UUT) to enable the selection of alternates. 2.3 TE Manufacturer It is the TE manufacturers responsibility to design TE to meet all test requirements specified by the MSD and additional

44、 documentation available (e.g., TSDP per ARINC Report 625). The TE manufacturer should also consider additional factors, such as: Intended area of use (e.g., shop and/or flight line) Environmental conditions (e.g., temperature and humidity) Power supply (e.g., batteries) Handling capabilities (e.g.,

45、 weight, rugged design, etc.) TE Users local regulatory requirements (CE, UL, etc.) TE software management A TE Manufacturer integrating multi-source subassemblies must flow-down the critical requirements to the sub-tier suppliers. In order to be useful, TE must be supplied with adequate documentati

46、on and training to allow the end user to make an equivalency determination, per ARINC Report 668. The documentation shall also support lifecycle factors such as storage, operation, maintenance, calibration/verification, and repair. ATA Specification 101 may be helpful in creating this documentation.

47、 ARINC REPORT 602B Page 4 2.0 ROLES AND RESPONSIBILITIES 2.4 TE User The TE User is an entity that purchases and operates TE. Therefore, the TE User is responsible for identifying local regulatory requirements and communicating them to the TE manufacturer. The TE User shall ensure that the equipment

48、 is stored, operated, maintained, calibrated/verified, and repaired in accordance with the equipments documentation. The TE User is responsible to ensure that appropriate contracts and intellectual property agreements are in place to authorize the exchange of information identified in this standard.

49、 The TE User has certain considerations in determining TE requirements and capabilities. TE Users may request documentation to be prepared by the component manufacturers or TE manufacturer to assist the TE User to: Develop anticipated work flow Assess the adequacy of existing TE or the need for new TE Plan test facilities and systems Train maintenance personnel Establish the business case 2.5 Contractual Roles and Responsibilities The roles and responsibilities above need to be defined in a contract for TE purchases. The contract should incl