BS PD IEC TS 62972-2016 General lighting Organic light emitting diode (OLED) products and related equipment Terms and definitions《普通照明 有机发光二极管 (OLED) 产品及相关设备 术语和定义》.pdf

《BS PD IEC TS 62972-2016 General lighting Organic light emitting diode (OLED) products and related equipment Terms and definitions《普通照明 有机发光二极管 (OLED) 产品及相关设备 术语和定义》.pdf》由会员分享，可在线阅读，更多相关《BS PD IEC TS 62972-2016 General lighting Organic light emitting diode (OLED) products and related equipment Terms and definitions《普通照明 有机发光二极管 (OLED) 产品及相关设备 术语和定义》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、General lighting Organic light emitting diode (OLED) products and related equipment Terms and definitions PD IEC/TS 62972:2016 BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National foreword This Published Document is the UK implementation of IEC/TS 62972:2016. Th

2、e UK participation in its preparation was entrusted by Technical Committee CPL/34, Lamps and Related Equipment, to Subcommittee CPL/34/1, Electric lamps. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include al

3、l the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016 ISBN 978 0 580 89150 2 ICS 29.140.99 Compliance with a British Standard cannot confer immunity from legal obligations. This Pub

4、lished Document was published under the authority of the Standards Policy and Strategy Committee on 31 August 2016. Amendments/corrigenda issued since publication Date Text affected PUBLISHED DOCUMENT PD IEC/TS 62972:2016 IEC TS 62972 Edition 1.0 2016-07 TECHNICAL SPECIFICATION SPECIFICATION TECHNIQ

5、UE General lighting Organic light emitting diode (OLED) products and related equipment Terms and definitions clairage gnral Produits diodes lectroluminescentes organiques (OLED) et quipements associs Termes et dfinitions INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATI

6、ONALE ICS 29.140.99 ISBN 978-2-8322-3468-6 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vo

7、us avez obtenu cette publication via un distributeur agr. PD IEC/TS 62972:2016 2 IEC TS 62972:2016 IEC 2016 CONTENTS FOREWORD . 3 1 Scope 5 2 Classification of terms . 5 3 Fundamental terms 5 4 Terms related to physical properties . 7 5 Terms related to constructive elements 9 6 Terms related to per

8、formance and specifications 12 Bibliography . 14 PD IEC/TS 62972:2016IEC TS 62972:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ GENERAL LIGHTING ORGANIC LIGHT EMITTING DIODE (OLED) PRODUCTS AND RELATED EQUIPMENT TERMS AND DEFINITIONS FOREWORD 1) The International Electrotechnical Commi

9、ssion (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and i

10、n addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee i

11、nterested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordan

12、ce with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all intere

13、sted IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsib

14、le for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence be

15、tween any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of

16、conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

17、members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publicati

18、on or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publicati

19、on may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. In exceptional circumstances, a technical committee may propose the publication of a technical spe

20、cification when the required support cannot be obtained for the publication of an International Standard, despite repeated efforts, or the subject is still under technical development or where, for any other reason, there is the future but no immediate possibility of an agreement on an International

21、 Standard. Technical specifications are subject to review within three years of publication to decide whether they can be transformed into International Standards. IEC TS 62972, which is a Technical Specification, has been prepared by subcommittee 34A: Lamps, of IEC technical committee 34: Lamps and

22、 related equipment. PD IEC/TS 62972:2016 4 IEC TS 62972:2016 IEC 2016 The text of this Technical Specification is based on the following documents: Enquiry draft Report on voting 34A/1874/DTS 34A/1896/RVC Full information on the voting for the approval of this technical specification can be found in

23、 the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.i

24、ec.ch“ in the data related to the specific publication. At this date, the publication will be transformed into an International standard, reconfirmed, withdrawn, replaced by a revised edition, or amended. PD IEC/TS 62972:2016IEC TS 62972:2016 IEC 2016 5 GENERAL LIGHTING ORGANIC LIGHT EMITTING DIODE

25、(OLED) PRODUCTS AND RELATED EQUIPMENT TERMS AND DEFINITIONS 1 Scope This Technical Specification establishes terms and definitions specific for general lighting OLED light sources and related equipment. 2 Classification of terms Terms specific for general lighting OLED light sources and related equi

26、pment are classified as follows: a) fundamental terms; b) terms related to physical properties; c) terms related to constructive elements; d) terms related to performance and specifications. NOTE This classification is in line with IEC 62341-1-2:2014. However, the classification of terms related to

27、the production process was removed. 3 Fundamental terms 3.1 organic light emitting diode OLED light emitting diode consisting of an electroluminescent zone made of organic compounds which are situated between two electrodes Note 1 to entry: This note applies to the French language only. 3.2 polymeri

28、c organic light emitting diode PLED OLED where all the organic semiconductor materials are polymers Note 1 to entry: This note applies to the French language only. 3.3 small molecule organic light emitting diode SMOLED OLED where all the organic semiconductor materials are small molecules Note 1 to

29、entry: This note applies to the French language only. 3.4 stacked OLED OLED consisting of two or more emission layers and at least one charge generation layer between two emission layers Note 1 to entry: There can be emission layers inside a stacked OLED that are not separated by a charge generation

30、 layer. However, at least one pair of emission layers is separated by a charge generation layer. PD IEC/TS 62972:2016 6 IEC TS 62972:2016 IEC 2016 3.5 bottom emission OLED OLED which emits light through the substrate side 3.6 top emission OLED OLED which emits light through the encapsulation side 3.

31、7 transparent OLED OLED in which the light-emitting area is transparent in the off-state 3.8 inverted OLED OLED where the substrate carries the cathode 3.9 hybrid organic light emitting diode hybrid OLED OLED that uses a hybrid OLED stack 3.10 bendable OLED OLED designed for being bent into a perman

32、ent shape 3.11 flexible OLED OLED designed for being repeatedly bent 3.12 OLED tile smallest functional OLED light source which cannot be separated into smaller OLED lighting elements and containing at least one contact ledge with at least one positive and one negative pole for connection to the ele

33、ctrical power supply 3.13 OLED panel independently operable unit OLED product containing one or more OLED tiles and means of connection to electrical supply such as a connector, PCB (printed circuit board), passive electronic components and optionally a frame 3.14 OLED module assembly of one or more

34、 OLED panels and active electronic components 3.15 OLED lamp OLED panel or OLED module with a cap 3.16 OLED light source OLED tile, OLED panel, OLED module or OLED lamp PD IEC/TS 62972:2016IEC TS 62972:2016 IEC 2016 7 4 Terms related to physical properties 4.1 light output area A LOarea of an OLED t

35、ile, panel or module designed to emit light, including active luminous areas, busbars and other mechanical structures, but excluding edges Note 1 to entry: The light output area is expressed in m 2 . 4.2 active luminous area A actarea of an OLED tile, panel or module designed to emit light and inclu

36、ding inner non-luminous areas due to defects, but excluding layout defined busbars and other mechanical structures Note 1 to entry: The active luminous area is expressed in m 2 . 4.3 aperture ratio F quotient of active luminous area and light output area LO act A A F = Note 1 to entry: The aperture

37、ratio is a quantity of dimension one. 4.4 luminous current efficacy r luminance divided by the applied current per unit area Note 1 to entry: This term is sometimes incorrectly called “luminous current efficiency“. Note 2 to entry: The luminous current efficacy is expressed in cd/m 2 . 4.5 emission

38、ratio luminous flux emitted by the side with the higher luminous flux divided by the luminous flux emitted by the side with the lower luminous flux Note 1 to entry: This term is only used with transparent OLED panels. Note 2 to entry: The emission ratio is a quantity of dimension one. 4.6 internal q

39、uantum efficiency IQEratio of the number of photons generated inside an OLED to the number of electrons injected into the OLED Note 1 to entry: An internal quantum efficiency greater than 100 % is possible if charge carriers are generated inside the OLED. 4.7 external quantum efficiency EQEquantity

40、describing the yield of outcoupled photons with regard to injected charge carriers (electrons) PD IEC/TS 62972:2016 8 IEC TS 62972:2016 IEC 2016 Note 1 to entry: The external quantum efficiency can be expressed as out IQE EQE = where outis the outcoupling efficiency. out contains optical loss modes

41、such as surface plasmon polaritons or waveguided modes. Note 2 to entry: The external quantum efficiency is expressed in %. 4.8 outcoupling efficiency outquotient of the external quantum efficiency and the internal quantum efficiency IQE EQE out =4.9 forward direction F direction of electrical curre

42、nt that results when the HIL/HTL side of the OLED stack (p-type region) connected to an electrode is on positive potential relative to the EIL/ETL side (n-type region) connected to the other electrode Note 1 to entry: The forward direction is denoted by adding the subscript F to the symbol of the qu

43、antity concerned, for example forward current is denoted as I F . 4.10 reverse direction R direction of electrical current when the HIL/HTL side of the OLED stack is connected to an electrical contact which is on negative potential with regards to the connection of the EIL/ETL side Note 1 to entry:

44、The reverse direction is denoted by adding the subscript R to the symbol of the quantity concerned, for example reverse current is denoted as I R . 4.11 forward current I Felectrical current in forward direction Note 1 to entry: The forward current is expressed in A. 4.12 forward voltage U Fpotentia

45、l difference pertaining to the forward direction, dependent on the forward current at a given temperature Note 1 to entry: The forward voltage is expressed in V. SOURCE: IEC 62504:2014, 3.13, modified Note 2 to entry has been deleted. 4.13 reverse current I Relectrical current in reverse direction N

46、ote 1 to entry: The reverse current is expressed in A. PD IEC/TS 62972:2016IEC TS 62972:2016 IEC 2016 9 4.14 reverse voltage U Rpotential difference pertaining to the reverse direction dependent on the reverse current Note 1 to entry: The reverse voltage is expressed in V. 4.15 uniformity physical m

47、agnitude of change present in a spatial luminance or chromaticity distribution Note 1 to entry: This definition does not take perception into account. 4.16 homogeneity perceived magnitude of change present in a spatial luminance or chromaticity distribution 5 Terms related to constructive elements 5

48、.1 fluorescent emitter emitter where only the singlet state excitons can show radiative decay and photon emission Note 1 to entry: A fluorescent emitter is a type of emitter material. According to spin statistics in quantum chemistry, excitons formed by an electron and a hole can have two different

49、spin multiplicities, i.e. 1 (singlet state) or 3 (triplet state). Simply spoken, 25 % of the states are singlets and 75 % are triplets. In a fluorescent emitter only the singlet state excitons can show radiative decay and photon emission. The theoretical maximum of the internal quantum efficiency is 25 %. 5.2 phosphorescent emitter emitter where singlet and triplet state excitons can show radiative decay and photon emission Note 1 to entry: A phospho