BS ISO IEC TR 18047-4-2005 Information technology - Radio frequency identification device conformance test methods - Test methods for air interface communications at 2 45 .pdf

《BS ISO IEC TR 18047-4-2005 Information technology - Radio frequency identification device conformance test methods - Test methods for air interface communications at 2 45 .pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC TR 18047-4-2005 Information technology - Radio frequency identification device conformance test methods - Test methods for air interface communications at 2 45 .pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO/IEC TR 18047-4: 2004 Information technology Radio frequency identification device conformance test methods Part 4: Test methods for air interface communications at 2,45 GHz ICS 35.040 BS ISO/IEC TR 18047-4:2004 This British Standard was published under the authority of the St

2、andards Policy and Strategy Committee on 12 January 2005 BSI 12 January 2005 ISBN 0 580 45235 2 National foreword This British Standard reproduces verbatim ISO/IEC TR 18047-4:2004 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Commit

3、tee IST/34, Automatic identification and data capture techniques, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this

4、document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contr

5、act. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals fo

6、r change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO/IEC TR title page, pages ii to v, a blank page, pages 1 to 11 and a back cover.

7、The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Reference number ISO/IEC TR 18047-4:2004(E) OSI4002 CEI/TECHNICAL REPORT ISO/IEC TR 18047-4 First edition 2004-11-15 Information technology Radi

8、o frequency identification device conformance test methods Part 4: Test methods for air interface communications at 2,45 GHz Technologies de linformation Mthodes dessai de conformit du dispositif didentification par radiofrquence Partie 4: Mthodes dessai pour les communications dune interface dair 2

9、,45 GHz BSISO/IECTR180474:2004IS/OIET CR -740814:02(40)E DPlcsid Fremia ihTs PDF file may ctnoian emdebt dedyfepcaes. In ccaocnadrw eith Aebods licensilop gnic,y this file mairp eb ynted iv roweb detu slahl ton ide ebtlnu deess the typefaces whice era hml era deddebicsnede to i dnanstlaled t noeh co

10、mputfrep reormign tide ehtin.g In wodlnidaot gnhis file, trapise atpecc tiereht nser ehnopsiiblity fo not infriigngn Aebods licensilop gnic.y ehT ISO tneClar Secrteiraat caceptl on siibality in this .aera Ai ebods a tredamafo kr Aebod SystemI sncotaropr.de teDails fo teh softwacudorp erts sut deo cr

11、taee this PDF file cna f ebi dnuon tlareneG eh Info leratit evo the file; tP ehDc-Frtaeion marapteres wetpo erimizf deoirp rnti.gn Evc yreasah er t neebakt neo snet erutah teh file is suitlbaf eosu rI yb eSO memdob rebeis. In tlnu ehikletneve y ttah lborp aem leratit gno it is f,dnuo plsaee inform t

12、tneC ehlar Secrteiraat ta the serddaig sleb nevwo. ISO/IE4002 C Athgir lls serevr.de selnUs towrehise specfidei, trap on fo thsi ilbupctanoi may cudorper ebtu ro dezilina ni dey fomr yb ro nam y,snae lecetrinoc m roecinahcal, inclidung tohpcoiypom dna gnicrfoilm, wittuoh mrepissii non writif gnrmo i

13、etI rehSta O tserdda ehs ebolw or ISOs memreb i ydobn the cnuotrfo y ttseuqer ehe.r ISO cirypothg fofice saCe tsopale 65 eneG 1121-HC 02 av leT. 4 + 10 947 22 1 11 xaF0 947 22 14 + 9 74 E-mail coirypthgiso.o gr We bwww.is.o gro Pulbisdehi n Switlrez dnaii ISO/IE 4002 C Allr ihgtsser edevrBSISO/IECTR

14、180474:2004IS/OIET CR -740814:02(40)E I SO/IE 4002 C All irhgts seredevr iiiContents 1 Scope 1 2 Normative references . 1 3 Terms and definitions. 2 4 Symbols and abbreviations . 2 5 Conformance tests for ISO/IEC 18000-4 2,45 GHz 2 5.1 Default items applicable to the test methods 2 5.1.1 Test enviro

15、nment 2 5.1.2 Pre-conditioning 2 5.1.3 Default tolerance . 2 5.1.4 Total measurement uncertainty. 2 5.2 Conformance tests for ISO/IEC 18000-4 Mode 2 3 5.2.1 Test set-up and measurement equipment for Mode 2 3 5.2.1.1 Test set-up for interrogator testing . 3 5.2.1.2 Test set-up for tag testing 4 5.2.1

16、.3 Test equipment 4 5.2.2 Functional test interrogator 5 5.2.2.1 Modulation . 5 5.2.2.2 Operating frequency accuracy. 6 5.2.3 Functional test tag . 7 5.2.3.1 Modulation . 7 5.2.3.2 Coding 10 5.2.3.3 Sub-carrier frequency . 10 BSISO/IECTR180474:2004IS/OIET CR -740814:02(40)E iv I SO/IE 4002 C All irh

17、gts seredevrForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards th

18、rough technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, al

19、so take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to pr

20、epare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. In exceptional circumstances, the joi

21、nt technical committee may propose the publication of a Technical Report of one of the following types: type 1, when the required support cannot be obtained for the publication of an International Standard, despite repeated efforts; type 2, when the subject is still under technical development or wh

22、ere for any other reason there is the future but not immediate possibility of an agreement on an International Standard; type 3, when the joint technical committee has collected data of a different kind from that which is normally published as an International Standard (“state of the art”, for examp

23、le). Technical Reports of types 1 and 2 are subject to review within three years of publication, to decide whether they can be transformed into International Standards. Technical Reports of type 3 do not necessarily have to be reviewed until the data they provide are considered to be no longer valid

24、 or useful. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC TR 18047-4, which is a Technical Report of type 2, was prepared by Joint

25、Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 31, Automatic identification and data capture techniques. ISO/IEC TR 18047 consists of the following parts, under the general title Information technology Radio frequency identification device conformance test methods: Part 3

26、: Test methods for air interface communications at 13,56 MHz Part 4: Test methods for air interface communications at 2,45 GHz Test methods for air interface communications below 135 kHz, at 860 MHz to 960 MHz, and at 433 MHz will form the subjects of the future Parts 2, 6 and 7, respectively. BSISO

27、/IECTR180474:2004IS/OIET CR -740814:02(40)E I SO/IE 4002 C All irhgts seredevr vIntroduction ISO/IEC 18000-4 defines the air interface for radio frequency identification (RFID) devices operating in the 2,45 GHz Industrial, Scientific, and Medical (ISM) band used in item management applications. The

28、purpose of this part of ISO/IEC TR 18047 is to provide a test method for ISO/IEC 18000-4. This part of ISO/IEC TR 18047 contains all compliance measurements required to be fulfilled by a product in order to be compliant to 18000-4 Mode 2. BSISO/IECTR180474:2004blank 4002:474081RTCEI/OSISBTECINHCAOPE

29、R LTR IS/OIET CR -740814:02(40)EI SO/IE 4002 C All irhgts seredevr 1Information technology Radio frequency identification device conformance test methods Part 4: Test methods for air interface communications at 2,45 GHz 1 Scope This part of ISO/IEC TR 18047 defines test methods for determining the c

30、onformance of radio frequency identification devices (tags and interrogators) for item management with the specifications given in the corresponding part of ISO/IEC 18000, but does not apply to the testing of conformity with regulatory or similar requirements. The test methods require only that the

31、mandatory functions, and any optional functions which are implemented, be verified. This may, in appropriate circumstances, be supplemented by further, application specific functionality criteria that are not available in the general case. The interrogator and tag conformance parameters in this part

32、 of ISO/IEC TR 18047 are: mode-specific conformance parameters including nominal values and tolerances; parameters that apply directly affecting system functionality and inter-operability. The following are not included in this part of ISO/IEC TR 18047: parameters that are already included in regula

33、tory test requirements; high-level data encoding conformance test parameters (these are specified in ISO/IEC 15962). Unless otherwise specified, the tests in this part of ISO/IEC TR 18047 apply exclusively to RFID tags and interrogator defined in ISO/IEC 18000-4 Mode 2. 2 Normative references The fo

34、llowing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 18000-1, Information technology Radio frequency

35、 identification for item management Part 1: Reference architecture and definition of parameters to be standardized ISO/IEC 18000-4, Information technology Radio frequency identification for item management Part 4: Parameters for air interface communications at 2,45 GHz ISO/IEC 19762 (all parts), Inf

36、ormation technology Automatic identification and data capture techniques Harmonized vocabulary 1)ISBN 92-67-10188-9, 1993, ISO Guide to the expression of uncertainty in measurement 1) To be published. BSISO/IECTR180474:2004IS/OIET CR -740814:02(40)E 2 I SO/IE 4002 C All irhgts seredevr3 Terms and de

37、finitions For the purposes of this document, the terms and definitions given in ISO/IEC 19762 (all parts) apply. 4 Symbols and abbreviations CW continuous wave f CCfrequency of the communication carrier f CHchannel spacing f IFfrequency of the intermediate frequency f RCfrequency of the reference ca

38、rrier OOK on-off keying R/O-tag read only tag R/W-tag read/write tag 5 Conformance tests for ISO/IEC 18000-4 2,45 GHz This part of ISO/IEC TR 18047 specifies a series of tests to determine the conformance of interrogators and tags. The results of these tests shall be compared with the parameters spe

39、cified in ISO/IEC 18000-4 to determine whether the interrogator or tag under test conforms. 5.1 Default items applicable to the test methods 5.1.1 Test environment Unless otherwise specified, testing shall take place in an environment of temperature 23 C 3 C (73 F 5 F) and relative humidity of 40 %

40、to 60 %. 5.1.2 Pre-conditioning Where pre-conditioning is required by the test method, the tags and interrogators to be tested shall be conditioned to the test environment for an appropriate period of time before testing. 5.1.3 Default tolerance Unless otherwise specified, a default tolerance of 5 %

41、 shall be applied to the quantity values given to specify the characteristics of the test equipment (e.g. linear dimensions) and the test method procedures (e.g. test equipment adjustments). 5.1.4 Total measurement uncertainty The total measurement uncertainty for each quantity determined by these t

42、est methods shall be stated in the test report. NOTE Basic information is given in “ISO Guide to the Expression of Uncertainty in Measurement”, ISBN 92-67-10188-9, 1993. BSISO/IECTR180474:2004IS/OIET CR -740814:02(40)E I SO/IE 4002 C All irhgts seredevr 35.2 Conformance tests for ISO/IEC 18000-4 Mod

43、e 2 The long-range, high data-rate RFID system specified in ISO/IEC 18000-4 is designed for long-range operation. Therefore a good receiver characteristic on both sides interrogator and tag (if applicable) is useful. The range of an RFID system also depends on the output power of the interrogator, w

44、hich is set according to regulatory limits and application needs. Therefore receiver sensitivity and transmitter output power measurements are not part of this part of ISO/IEC TR 18047. 5.2.1 Test set-up and measurement equipment for Mode 2 This clause defines the test set-up and measurement equipme

45、nt for verifying the operation of a tag or an interrogator according to ISO/IEC 18000-4. Test results shall not be influenced by the set-up method of the test. Test set-ups include: test set-up for interrogator testing (see 5.2.1.1), test set-up for tag testing (see 5.2.1.2), test equipment (see 5.2

46、.1.3). These are described in the following subclauses. 5.2.1.1 Test set-up for interrogator testing An interrogator with integral antenna(s) shall be equipped with temporary antenna connector(s), or coupling device(s) i.e. sense antenna(s) shall be used to connect to the test equipment. A sense ant

47、enna shall not affect test results; appropriate distances (e.g. 30 cm), antenna sizes and types (e.g. patch antenna), as well as antenna polarization (i.e. circular polarization) shall be used. The antenna configuration and distance shall be included in the test report. To set up an interrogator wit

48、h the appropriate test pattern and operational modes one of two methods shall be used (combinations shall also be possible): an implemented test mode, a tag for initializing the appropriate operational mode. The air interface parameter in a test mode shall behave the same as the air interface parame

49、ter during normal usage. Unless otherwise stated the following frequencies shall be used for all tests. The frequency of the reference carrier shall be set to f RC,nom. i = (2931+i)*f CH , where f CH= 819,2 kHz; the frequency of the communication carrier shall be set to f CC, nom. i = (2944+i)*f CH . All tests shall be performed at channels i = 0, 43, 86. The output power