IEC 61000-2-2-2002 Electromagnetic compatibility (EMC) - Part 2-2 Environment Compatibility levels for low-frequency conducted disturbances and signalling in pu.pdf

《IEC 61000-2-2-2002 Electromagnetic compatibility (EMC) - Part 2-2 Environment Compatibility levels for low-frequency conducted disturbances and signalling in pu.pdf》由会员分享，可在线阅读，更多相关《IEC 61000-2-2-2002 Electromagnetic compatibility (EMC) - Part 2-2 Environment Compatibility levels for low-frequency conducted disturbances and signalling in pu.pdf（66页珍藏版）》请在麦多课文档分享上搜索。

1、NORMEINTERNATIONALECEIIECINTERNATIONALSTANDARD61000-2-2Deuxime ditionSecond edition2002-03Compatibilit lectromagntique (CEM) Partie 2-2:Environnement Niveaux de compatibilitpour les perturbations conduites bassefrquence et la transmission des signauxsur les rseaux publics dalimentationbasse tensionE

2、lectromagnetic compatibility (EMC) Part 2-2:Environment Compatibility levels for low-frequency conducted disturbances and signallingin public low-voltage power supply systemsNumro de rfrenceReference numberCEI/IEC 61000-2-2:2002PUBLICATION FONDAMENTALE EN CEMBASIC EMC PUBLICATIONCopyright Internatio

3、nal Electrotechnical Commission Provided by IHS under license with IECNot for ResaleNo reproduction or networking permitted without license from IHS-,-Numrotation des publicationsDepuis le 1er janvier 1997, les publications de la CEIsont numrotes partir de 60000. Ainsi, la CEI 34-1devient la CEI 600

4、34-1.Editions consolidesLes versions consolides de certaines publications de laCEI incorporant les amendements sont disponibles. Parexemple, les numros ddition 1.0, 1.1 et 1.2 indiquentrespectivement la publication de base, la publication debase incorporant lamendement 1, et la publication debase in

5、corporant les amendements 1 et 2.Informations supplmentairessur les publications de la CEILe contenu technique des publications de la CEI estconstamment revu par la CEI afin quil reflte ltatactuel de la technique. Des renseignements relatifs cette publication, y compris sa validit, sont dispo-nibles

6、 dans le Catalogue des publications de la CEI(voir ci-dessous) en plus des nouvelles ditions,amendements et corrigenda. Des informations sur lessujets ltude et lavancement des travaux entreprispar le comit dtudes qui a labor cette publication,ainsi que la liste des publications parues, sontgalement

7、disponibles par lintermdiaire de: Site web de la CEI (www.iec.ch) Catalogue des publications de la CEILe catalogue en ligne sur le site web de la CEI(www.iec.ch/catlg-f.htm) vous permet de faire desrecherches en utilisant de nombreux critres,comprenant des recherches textuelles, par comitdtudes ou d

8、ate de publication. Des informationsen ligne sont galement disponibles sur lesnouvelles publications, les publications rempla-ces ou retires, ainsi que sur les corrigenda. IEC Just PublishedCe rsum des dernires publications parues(www.iec.ch/JP.htm) est aussi disponible parcourrier lectronique. Veui

9、llez prendre contactavec le Service client (voir ci-dessous) pour plusdinformations. Service clientsSi vous avez des questions au sujet de cettepublication ou avez besoin de renseignementssupplmentaires, prenez contact avec le Serviceclients:Email: custserviec.chTl: +41 22 919 02 11Fax: +41 22 919 0

10、3 00Publication numberingAs from 1 January 1997 all IEC publications areissued with a designation in the 60000 series. Forexample, IEC 34-1 is now referred to as IEC 60034-1.Consolidated editionsThe IEC is now publishing consolidated versions of itspublications. For example, edition numbers 1.0, 1.1

11、and 1.2 refer, respectively, to the base publication,the base publication incorporating amendment 1 andthe base publication incorporating amendments 1and 2.Further information on IEC publicationsThe technical content of IEC publications is keptunder constant review by the IEC, thus ensuring thatthe

12、content reflects current technology. Informationrelating to this publication, including its validity, isavailable in the IEC Catalogue of publications(see below) in addition to new editions, amendmentsand corrigenda. Information on the subjects underconsideration and work in progress undertaken by t

13、hetechnical committee which has prepared thispublication, as well as the list of publications issued,is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publicationsThe on-line catalogue on the IEC web site(www.iec.ch/catlg-e.htm) enables you to searchby a variety of cri

14、teria including text searches,technical committees and date of publication. On-line information is also available on recentlyissued publications, withdrawn and replacedpublications, as well as corrigenda. IEC Just PublishedThis summary of recently issued publications(www.iec.ch/JP.htm) is also avail

15、able by email.Please contact the Customer Service Centre (seebelow) for further information. Customer Service CentreIf you have any questions regarding thispublication or need further assistance, pleasecontact the Customer Service Centre:Email: custserviec.chTel: +41 22 919 02 11Fax: +41 22 919 03 0

16、0.Copyright International Electrotechnical Commission Provided by IHS under license with IECNot for ResaleNo reproduction or networking permitted without license from IHS-,-NORMEINTERNATIONALECEIIECINTERNATIONALSTANDARD61000-2-2Deuxime ditionSecond edition2002-03Compatibilit lectromagntique (CEM) Pa

17、rtie 2-2:Environnement Niveaux de compatibilitpour les perturbations conduites bassefrquence et la transmission des signauxsur les rseaux publics dalimentationbasse tensionElectromagnetic compatibility (EMC) Part 2-2:Environment Compatibility levels for low-frequency conducted disturbances and signa

18、llingin public low-voltage power supply systemsPour prix, voir catalogue en vigueurFor price, see current catalogue IEC 2002 Droits de reproduction rservs Copyright - all rights reservedAucune partie de cette publication ne peut tre reproduite niutilise sous quelque forme que ce soit et par aucun pr

19、ocd,lectronique ou mcanique, y compris la photocopie et lesmicrofilms, sans laccord crit de lditeur.No part of this publication may be reproduced or utilized in anyform or by any means, electronic or mechanical, includingphotocopying and microfilm, without permission in writing fromthe publisher.Int

20、ernational Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.chCODE PRIXPRICE CODE UCommission Electrotechnique InternationaleInternational Electrotechnical Commission PUBLI

21、CATION FONDAMENTALE EN CEMBASIC EMC PUBLICATIONCopyright International Electrotechnical Commission Provided by IHS under license with IECNot for ResaleNo reproduction or networking permitted without license from IHS-,- 2 61000-2-2 CEI:2002SOMMAIREAVANT-PROPOS 4INTRODUCTION.81 Domaine dapplication et

22、 objet 102 Rfrences normatives .123 Dfinitions 123.1 Dfinitions gnrales .123.2 Dfinitions relatives aux phnomnes 144 Niveaux de compatibilit .184.1 Commentaires gnraux184.2 Fluctuations de tension et flicker184.3 Harmoniques .204.4 Inter-harmoniques .224.5 Creux de tension et coupures brves .244.6 D

23、squilibre de tension .264.7 Surtensions transitoires .264.8 Variations temporaires de la frquence du rseau264.9 Composantes continues.264.10 Systmes de transmission de signaux sur le rseau.28Annexe A (informative) Le rle des niveaux de compatibilit et de planification en CEM32A.1 Le besoin de niveau

24、x de compatibilit 32A.2 Relation entre niveau de compatibilit et niveaux dimmunit32A.3 Relation entre niveau de compatibilit et limites dmission 34A.4 Niveaux de planification .36A.5 Illustration des niveaux de compatibilit, dmission, dimmunit et de planification.38Annexe B (informative) Prsentation

25、 de quelques phnomnes de perturbation 40B.1 Dcomposition de tensions et courants non sinusodaux 40B.2 Inter-harmoniques et composantes de tension aux frquences suprieures celledu rang 50 44B.3 Creux de tension et coupures brves de lalimentation52B.4 Surtensions transitoires54B.5 Composantes continue

26、s .54Bibliographie.56Copyright International Electrotechnical Commission Provided by IHS under license with IECNot for ResaleNo reproduction or networking permitted without license from IHS-,-61000-2-2 IEC:2002 3 CONTENTSFOREWORD.5INTRODUCTION.91 Scope and object112 Normative references133 Definitio

27、ns 133.1 General definitions.133.2 Phenomena related definitions.154 Compatibility levels .194.1 General comment 194.2 Voltage fluctuations and flicker 194.3 Harmonics .214.4 Interharmonics.234.5 Voltage dips and short supply interruptions 254.6 Voltage unbalance .274.7 Transient overvoltages.274.8

28、Temporary power frequency variation.274.9 DC component.274.10 Mains signalling.29Annex A (Informative) The function of compatibility levels and planning levels in EMC .33A.1 The need for compatibility levels.33A.2 Relation between compatibility level and immunity levels 33A.3 Relation between compat

29、ibility level and emission limits .35A.4 Planning levels.37A.5 Illustration of compatibility, emission, immunity and planning levels.39Annex B (informative) Discussion of some disturbance phenomena .41B.1 Resolution of non-sinusoidal voltages and currents.41B.2 Interharmonics and voltage components

30、at frequencies above that of the 50thharmonic45B.3 Voltage dips and short supply interruptions.53B.4 Transient overvoltages .55B.5 DC component .55Bibliography57Copyright International Electrotechnical Commission Provided by IHS under license with IECNot for ResaleNo reproduction or networking permi

31、tted without license from IHS-,- 4 61000-2-2 CEI:2002COMMISSION LECTROTECHNIQUE INTERNATIONALE_COMPATIBILIT LECTROMAGNTIQUE (CEM) Partie 2-2: Environnement Niveaux de compatibilitpour les perturbations conduites basse frquence et la transmissiondes signaux sur les rseaux publics dalimentation basse

32、tensionAVANT-PROPOS1) La CEI (Commission lectrotechnique Internationale) est une organisation mondiale de normalisation composede lensemble des comits lectrotechniques nationaux (Comits nationaux de la CEI). La CEI a pour objet defavoriser la coopration internationale pour toutes les questions de no

33、rmalisation dans les domaines dellectricit et de llectronique. A cet effet, la CEI, entre autres activits, publie des Normes internationales.Leur laboration est confie des comits dtudes, aux travaux desquels tout Comit national intress par lesujet trait peut participer. Les organisations internation

34、ales, gouvernementales et non gouvernementales, enliaison avec la CEI, participent galement aux travaux. La CEI collabore troitement avec lOrganisationInternationale de Normalisation (ISO), selon des conditions fixes par accord entre les deux organisations.2) Les dcisions ou accords officiels de la

35、CEI en ce qui concerne les questions techniques, prpars par lescomits dtudes o sont reprsents tous les Comits nationaux sintressant ces questions, expriment dansla plus grande mesure possible un accord international sur les sujets examins.3) Ces dcisions constituent des recommandations international

36、es publies sous forme de normes, de rapportstechniques ou de guides et agres comme telles par les Comits nationaux.4) Dans le but dencourager lunification internationale, les Comits nationaux de la CEI sengagent appliquer defaon transparente, dans toute la mesure possible, les Normes internationales

37、 de la CEI dans leurs normesnationales et rgionales. Toute divergence entre la norme de la CEI et la norme nationale ou rgionalecorrespondante doit tre indique en termes clairs dans cette dernire.5) La CEI na fix aucune procdure concernant le marquage comme indication dapprobation et sa responsabili

38、tnest pas engage quand un matriel est dclar conforme lune de ses normes.6) Lattention est attire sur le fait que certains des lments de la prsente Norme internationale peuvent fairelobjet de droits de proprit intellectuelle ou de droits analogues. La CEI ne saurait tre tenue pourresponsable de ne pa

39、s avoir identifi de tels droits de proprit et de ne pas avoir signal leur existence.La Norme internationale CEI 61000-2-2 a t tablie par le sous-comit 77A: Phnomnesbasse frquence, du comit dtudes 77 de la CEI: Compatibilit lectromagntique. Elle a lestatut de publication fondamentale en CEM conformme

40、nt au guide 107 de la CEI.Cette deuxime dition annule et remplace la premire dition, parue en 1990. Cette deuximedition constitue une rvision technique.Le texte de cette norme est issu des documents suivants:FDIS Rapport de vote77A/367/FDIS 77A/376/RVDLe rapport de vote indiqu dans le tableau ci-des

41、sus donne toute information sur le vote ayantabouti lapprobation de cette norme.Cette publication a t rdige selon les Directives ISO/CEI, Partie 3.Les annexes A et B sont donnes uniquement titre dinformation.Copyright International Electrotechnical Commission Provided by IHS under license with IECNo

42、t for ResaleNo reproduction or networking permitted without license from IHS-,-61000-2-2 IEC:2002 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION_ELECTROMAGNETIC COMPATIBILITY (EMC) Part 2-2: Environment Compatibility levels for low-frequency conducteddisturbances and signalling in public low-voltage po

43、wer supply systemsFOREWORD1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of the IEC is to promoteinternational co-operation on all questions concerning sta

44、ndardization in the electrical and electronic fields. Tothis end and in addition to other activities, the IEC publishes International Standards. Their preparation isentrusted to technical committees; any IEC National Committee interested in the subject dealt with mayparticipate in this preparatory w

45、ork. International, governmental and non-governmental organizations liaisingwith the IEC also participate in this preparation. The IEC collaborates closely with the International Organizationfor Standardization (ISO) in accordance with conditions determined by agreement between the twoorganizations.

46、2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, aninternational consensus of opinion on the relevant subjects since each technical committee has representationfrom all interested National Committees.3) The documents produced have the form of reco

47、mmendations for international use and are published in the formof standards, technical specifications, technical reports or guides and they are accepted by the NationalCommittees in that sense.4) In order to promote international unification, IEC National Committees undertake to apply IEC Internatio

48、nalStandards transparently to the maximum extent possible in their national and regional standards. Anydivergence between the IEC Standard and the corresponding national or regional standard shall be clearlyindicated in the latter.5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for anyequipment declared to be in conformity with one of i