IEC 60269-2-2013 Low-voltage fuses - Part 2 Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examp.pdf

《IEC 60269-2-2013 Low-voltage fuses - Part 2 Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examp.pdf》由会员分享，可在线阅读，更多相关《IEC 60269-2-2013 Low-voltage fuses - Part 2 Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examp.pdf（410页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 60269-2 Edition 5.0 2013-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Low-voltage fuses Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) Examples of standardized systems of fuses A to K Fusibles basse tension Partie 2: Exigen

2、ces supplmentaires pour les fusibles destins tre utiliss par des personnes habilites (fusibles pour usages essentiellement industriels) Exemples de systmes de fusibles normaliss A K IEC60269-2:2013 colourinsideTHIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights

3、 reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requeste

4、r. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de

5、cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de l

6、a CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerla

7、nd www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept und

8、er constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number,

9、text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by em

10、ail. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) o

11、n-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondial

12、e qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un co

13、rrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et

14、 les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org L

15、e premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service

16、 Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60269-2 Edition 5.0 2013-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Low-voltage fuses Part 2: Supplementary requirements for fuses for use

17、 by authorized persons (fuses mainly for industrial application) Examples of standardized systems of fuses A to K Fusibles basse tension Partie 2: Exigences supplmentaires pour les fusibles destins tre utiliss par des personnes habilites (fusibles pour usages essentiellement industriels) Exemples de

18、 systmes de fusibles normaliss A K INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XH ICS 29.120.50 PRICE CODE CODE PRIX ISBN 978-2-8322-0898-4 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique In

19、ternationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colourinside 2 60269-2 IEC:2013 CONTENTS FOREWORD . 16 INTRODUCTION . 18 1 General scope 19 1.1 Scope 19

20、 1.2 Normative references 20 Fuse system A Fuses with fuse-links with blade contacts (NH fuse system) 21 1 General 21 1.1 Scope 21 2 Terms and definitions . 21 3 Conditions for operation in service 22 4 Classification 22 5 Characteristics of fuses 22 5.2 Rated voltage 22 5.3.1 Rated current of the f

21、use-link. 22 5.3.2 Rated current of the fuse-holder 22 5.5 Rated power dissipation of a fuse-link and rated acceptable power dissipation of a fuse-holder . 22 5.6 Limits of time-current characteristics . 22 5.6.1 Time-current characteristics, time-current zones and overload curves . 22 5.6.2 Convent

22、ional times and currents 22 5.6.3 Gates 23 5.7.2 Rated breaking capacity 23 6 Markings 23 6.1 Markings of fuse-holders . 23 6.2 Markings of fuse-links 24 7 Standard conditions for construction . 24 7.1 Mechanical design . 24 7.1.2 Connections, including terminals . 24 7.1.3 Fuse-contacts 25 7.1.6 Co

23、nstruction of fuse-bases 25 7.1.7 Construction of a fuse-link . 25 7.2 Insulating properties and suitability for insulation 26 7.7 I2t characteristics 26 7.8 Overcurrent discrimination of fuse-links . 27 7.9 Protection against electric shock . 27 8 Tests 28 8.1.4 Arrangement of the fuse and dimensio

24、ns . 28 8.1.6 Testing of fuse-holders 28 8.2.4 Acceptability of test results 29 8.2.5 Resistance to tracking . 29 8.3 Verification of temperature rise and power dissipation . 29 8.3.1 Arrangement of the fuse 29 8.3.2 Measurement of the temperature rise 29 8.5.5 Test method 30 60269-2 IEC:2013 3 8.5.

25、8 Acceptability of test results 31 8.7.4 Verification of overcurrent discrimination . 31 8.9 Verification of resistance to heat . 32 8.9.1 Fuse-base . 33 8.9.2 Fuse-links with gripping-lugs of moulded material or of metal fixed in moulded material . 33 8.10 Verification of non-deterioration of conta

26、cts . 34 8.10.1 Arrangement of the fuse 34 8.10.2 Test method 36 8.10.3 Acceptability of test results 37 8.11 Mechanical and miscellaneous tests 39 FIGURES 42 Annex AA (informative) Special test for cable overload protection 61 AA.1 Arrangement of the fuse 61 AA.2 Test method and acceptability of te

27、st results . 61 Fuse system B Fuses with striker fuse-links with blade contacts (NH fuse system) . 62 1 General 62 1.1 Scope 62 2 Terms and definitions . 62 3 Conditions for operation in service 62 4 Classification 62 5 Characteristics of fuses 62 5.2 Rated voltage 62 5.3.1 Rated current of the fuse

28、-link. 63 5.3.2 Rated current of the fuse-holder 63 5.5 Rated power dissipation of a fuse-link and rated acceptable power dissipation of a fuse-holder . 63 5.6 Limits of time-current characteristics . 63 5.7.2 Rated breaking capacity 63 6 Markings 63 7 Standard conditions for construction . 63 7.1 M

29、echanical design . 63 7.1.2 Connections, including terminals . 63 7.1.3 Fuse-contacts 63 7.1.7 Construction of a fuse-link . 64 7.2 Insulating properties and suitability for insulation 64 7.7 I2t characteristics 64 7.8 Overcurrent discrimination of “gG“ fuse-links . 64 7.9 Protection against electri

30、c shock . 64 8 Tests 64 8.1.6 Testing of fuse-holders 64 8.3 Verification of temperature rise and power dissipation . 64 8.7.4 Verification of overcurrent discrimination . 65 8.9 Verification of resistance to heat . 65 8.9.1 Fuse-base . 65 4 60269-2 IEC:2013 FIGURES 67 Fuse system C Fuse-rails (NH f

31、use system) . 74 1 General 74 1.1 Scope 74 2 Terms and definitions . 74 3 Conditions for operation in service 74 4 Classification 74 5 Characteristics of fuses 74 5.2 Rated voltage 74 5.3.2 Rated current 74 5.5.1 Rated acceptable power dissipation . 74 6 Markings 75 7 Standard conditions for constru

32、ction . 75 7.1 Mechanical design . 75 7.1.2 Connections, including terminals . 75 7.2 Insulating properties 75 8 Tests 75 8.1.6 Testing of fuse-holders 75 8.3 Verification of temperature rise and power dissipation . 76 8.3.1 Arrangement of the fuse 76 8.9 Verification of resistance to heat . 77 8.9.

33、1 Fuse-base . 77 8.10 Verification of non-deterioration of contacts . 77 8.10.1 Arrangement of the fuse 77 FIGURES 79 Fuse system D Fuse-bases for busbar mounting (40 mm system) (NH fuse system) . 84 1 General 84 1.1 Scope 84 2 Terms and definitions . 84 3 Conditions for operation in service 84 4 Cl

34、assification 84 5 Characteristics of fuses 84 5.2 Rated voltage 84 5.3.2 Rated current 85 5.5.2 Rated acceptable power dissipation of tandem fuse-bases 85 6 Markings 85 7 Standard conditions for construction . 85 7.1 Mechanical design . 85 7.1.2 Connections, including terminals . 85 7.1.5 Constructi

35、on of a fuse-base for busbar mounting . 86 7.2 Insulating properties and suitability for insulation 86 8 Tests 86 60269-2 IEC:2013 5 8.3 Verification of temperature rise and power dissipation . 86 8.3.1 Arrangement of the fuse 86 8.9.1 Fuse-base . 87 8.10 Verification of non-deterioration of contact

36、s . 87 8.10.1 Arrangement of the fuse 87 8.10.2 Test method 88 8.11 Mechanical and miscellaneous tests 88 FIGURES 89 Fuse system E Fuses with fuse-links for bolted connections (BS bolted fuse system) . 96 1 General 96 1.1 Scope 96 2 Terms and definitions . 96 3 Conditions for operation in service 96

37、 4 Classification 96 5 Characteristics of fuses 96 5.3.1 Rated current of the fuse-link. 96 5.3.2 Rated current of the fuse-holder 96 5.5 Rated power dissipation of a fuse-link and rated acceptable power dissipation of a fuse-holder . 97 5.6 Limits of time-current characteristics . 97 5.6.1 Time-cur

38、rent characteristics, time-current zones and overload curves . 97 5.6.2 Conventional times and currents 97 5.6.3 Gates 97 5.7.2 Rated breaking capacity 97 6 Markings 97 6.1 Markings of fuse-holders . 98 6.2 Markings of fuse-links 98 7 Standard conditions for construction . 98 7.1 Mechanical design .

39、 98 7.1.2 Connections including terminals 98 7.2 Insulating properties and suitability for insulation 98 7.9 Protection against electric shock . 98 8 Tests 98 8.3 Verification of temperature rise and power dissipation . 98 8.3.1 Arrangement of the fuse 98 8.3.3 Measurement of the power dissipation o

40、f the fuse-link . 98 8.4 Verification of operation 99 8.4.1 Arrangement of the fuse 99 8.5 Verification of breaking capacity 99 8.5.1 Arrangement of the fuse 99 8.5.8 Acceptability of test results 99 8.9 Verification of resistance to heat . 99 8.10 Verification of non-deterioration of contacts . 99

41、8.10.1 Arrangement of the fuse 99 8.10.2 Test method 99 6 60269-2 IEC:2013 8.10.3 Acceptability of the results . 100 8.11 Mechanical and miscellaneous tests 100 FIGURES 101 Fuse system F Fuses with fuse-links having cylindrical contact caps (NF cylindrical fuse system) . 110 1 General 110 1.1 Scope

42、110 2 Terms and definitions . 110 3 Conditions for operation in service 110 4 Classification 110 5 Characteristics of fuses 110 5.2 Rated voltage 110 5.3.1 Rated current of the fuse-link. 111 5.3.2 Rated current of the fuse-holder 111 5.5 Rated power dissipation of a fuse-link and rated acceptable p

43、ower dissipation of a fuse-holder . 111 5.6 Limits of time-current characteristics . 112 5.6.1 Time-current characteristics, time-current zones and overload curves . 112 5.6.2 Conventional times and currents 112 5.6.3 Gates 113 5.7.2 Rated breaking capacity 113 6 Markings 113 6.1 Markings of fuse-ho

44、lders . 113 6.2 Markings of fuse-links 114 7 Standard conditions for construction . 114 7.1 Mechanical design . 114 7.1.2 Connections including terminals 114 7.2 Insulating properties and suitability for insulation 114 7.7 I2t characteristics 115 7.8 Overcurrent discrimination of “gG“ fuse-links . 1

45、15 7.9 Protection against electric shock . 115 8 Tests 115 8.1.6 Testing of fuse-holders 116 8.3.1 Arrangement of the fuse 116 8.7.4 Verification of overcurrent discrimination . 118 8.9 Verification of resistance to heat . 119 8.10 Verification of non-deterioration of contacts . 119 8.10.1 Arrangeme

46、nt of the fuse 119 8.10.2 Test method 119 8.10.3 Acceptability of test results 120 FIGURES 121 Fuse system G Fuses with fuse-links with offset blade contacts (BS clip-in fuse system) . 125 1 General 125 1.1 Scope 125 60269-2 IEC:2013 7 2 Terms and definitions . 125 3 Conditions for operation in serv

47、ice 125 4 Classification 125 5 Characteristics of fuses 125 5.2 Rated voltage 126 5.3.1 Rated current of the fuse-link. 126 5.3.2 Rated current of the fuse-holder 126 5.5 Rated power dissipation of a fuse-link and rated acceptable power dissipation of a fuse-holder . 126 5.6.1 Time-current character

48、istics, time-current zones . 126 5.6.2 Conventional times and currents 126 5.6.3 Gates 126 5.7.2 Rated breaking capacity 127 6 Markings 127 6.1 Markings of fuse-holders . 127 6.2 Markings of fuse-links 127 7 Standard conditions for construction . 127 7.1 Mechanical design . 127 7.1.2 Connections inc

49、luding terminals 127 7.2 Insulating properties and suitability for insulation 128 7.7 I2t characteristics 128 7.9 Protection against electric shock . 128 8 Tests 128 8.3.3 Measurement of the power dissipation of the fuse-link . 128 8.4.1 Arrangement of the fuse 129 8.5.1 Arrangement of the fuse 129 8.7.4 Verification of overcurrent discrimination . 129 8.9 Verification of resistance to heat . 129 8.10 Verification of non-deterioration