IEC 61754-4-2013 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4 Type SC connector family《纤维光学互连器件和无源元件.纤维光学连接器接口.第4部分 SC型连接器系列》.pdf

《IEC 61754-4-2013 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4 Type SC connector family《纤维光学互连器件和无源元件.纤维光学连接器接口.第4部分 SC型连接器系列》.pdf》由会员分享，可在线阅读，更多相关《IEC 61754-4-2013 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4 Type SC connector family《纤维光学互连器件和无源元件.纤维光学连接器接口.第4部分 SC型连接器系列》.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 61754-4 Edition 2.0 2013-07 INTERNATIONAL STANDARD Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 4: Type SC connector family IEC 61754-4:2013(E) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved

2、. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you

3、 have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-

4、1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical cont

5、ent of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a vari

6、ety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available

7、on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International

8、Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 61754-4 Edition 2.0 2013-07 INTERNATIONAL STANDARD Fibre optic inte

9、rconnecting devices and passive components Fibre optic connector interfaces Part 4: Type SC connector family INTERNATIONAL ELECTROTECHNICAL COMMISSION W ICS 33.180.20 PRICE CODE ISBN 978-2-8322-0924-0 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you o

10、btained this publication from an authorized distributor. 2 61754-4 IEC:2013(E) CONTENTS FOREWORD . 4 1 Scope . 6 2 Normative references 6 3 Description . 6 4 Interfaces . 6 Bibliography 38 Figure 1 Simplex PC plug connector interface . 8 Figure 2 Simplex adaptor connector interface . 11 Figure 3 Pin

11、 gauge for adaptor . 13 Figure 4 Duplex PC plug connector interface 14 Figure 5 Duplex adaptor connector interface . 17 Figure 6 (continued overleaf) . 20 Figure 6 Simplex APC plug connector interface 21 Figure 7 (continued overleaf) . 23 Figure 7 Duplex APC plug connector interface 24 Figure 8 Simp

12、lex active device receptacle interface for APC connector plug 26 Figure 9 Simplex active device receptacle interface for PC connector plug 29 Figure 10 Duplex active device receptacle interface for APC connector plug . 32 Figure 11 Duplex active device receptacle interface for PC connector plug . 35

13、 Table 1 Intermateability of interface 7 Table 2 Dimensions of the simplex PC plug connector interface 9 Table 3 Grade 10 Table 4 Dimensions of the simplex adaptor connector interface 12 Table 5 Grade 13 Table 6 Pin gauge dimensions 13 Table 7 Dimensions of the duplex PC plug connector interface . 1

14、5 Table 8 Grade 16 Table 9 Dimensions of the duplex adaptor connector interface 18 Table 10 Grade 19 Table 11 Dimensions of the simplex APC plug connector interfaces 22 Table 12 Dimensions of the duplex APC plug connector interfaces . 25 Table 13 Dimensions of the simplex active device receptacle in

15、terface for APC connector plug 27 Table 14 Alignment feature grade . 28 Table 15 Mechanical stop feature grade . 28 Table 16 Dimensions of the simplex active device receptacle interface for PC connector plug 30 Table 17 Alignment feature grade . 31 Table 18 Mechanical stop feature grade . 31 61754-4

16、 IEC:2013(E) 3 Table 19 Dimensions of the duplex active device receptacle interface for APC connector plug 33 Table 20 Alignment feature grade . 34 Table 21 Mechanical stop feature grade . 34 Table 22 Dimensions of the duplex active device receptacle interface for PC connector plug 36 Table 23 Align

17、ment feature grade . 37 Table 24 Mechanical stop feature grade . 37 4 61754-4 IEC:2013(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 4: Type SC connector family FOREWORD 1) The International Electrotech

18、nical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To thi

19、s end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National

20、Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO)

21、in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from

22、 all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be hel

23、d responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any di

24、vergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IE

25、C marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual e

26、xperts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IE

27、C Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IE

28、C Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61754-4 has been prepared by subcommittee 86B: Fibre optic interconnecting devices and passive components, of IEC technical committee 86: Fib

29、re optics. This second edition cancels and replaces the first edition published in 1997 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) addition of the duplex plug and adaptor connector interface; b) rec

30、onsideration of the overall content of the standard. 61754-4 IEC:2013(E) 5 The text of this standard is based on the following documents: FDIS Report on voting 86B/3620/FDIS 86B/3652/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated i

31、n the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 61754 series, under the general title Fibre optic interconnecting devices and passive components Fibre optic connector interfaces, can be found on the IEC website. F

32、uture standards in this series will carry the new general title as cited above. Titles of existing standards in this series will be updated at the time of the next edition. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the

33、 IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. 6 61754-4 IEC:2013(E) FIBRE OPT

34、IC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 4: Type SC connector family 1 Scope This part of IEC 61754 defines the standard interface dimensions for type SC family of connectors. 2 Normative references The following documents, in whole or in part, are norm

35、atively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61755-3-1, Fibre optic connector optical interfaces Part

36、3-1:Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre IEC 61755-3-2, Fibre optic connector optical interfaces Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres 3

37、Description The parent connector for the type SC connector family is a single position plug connector which is characterized by a 2,5 mm nominal ferrule diameter. It includes a push-pull coupling mechanism which is spring loaded relative to the ferrule in the direction of the optical axis. The plug

38、has a single male key which may be used to orient and limit the relative position between the connector and the component to which it is mated. The optical alignment mechanism of the connector is of a resilient sleeve style. This part of IEC 61754 defines the standard interface dimensions of active

39、device receptacles for the type SC connectors. The receptacles are used to retain the connector plug and mechanically maintain the optical datum target of the plugs at a defined position within the receptacle housings. 4 Interfaces This standard contains the following standard interfaces: Interface

40、IEC 61754-4-1: simplex plug connector interface push/pull, PC Interface IEC 61754-4-2: simplex adaptor connector interface push/pull Interface IEC 61754-4-3: duplex plug connector interface push/pull, PC Interface IEC 61754-4-4: duplex adaptor connector interface push/pull Interface IEC 61754-4-5: s

41、implex plug connector interface push/pull, APC 8 Interface IEC 61754-4-6: duplex plug connector interface push/pull, APC 8 61754-4 IEC:2013(E) 7 Interface IEC 61754-4-X1: simplex active device receptacle interface for APC 8connector plug Interface IEC 61754-4-X2: simplex active device receptacle int

42、erface for PC connector plug Interface IEC61754-4-X3: duplex active device receptacle interface for APC 8connector plug Interface IEC 61754-4-X4: duplex active device receptacle interface for PC connector plug The plug of interface IEC 61754-4-1 and interface IEC 61754-4-3 has a ferrule with a spher

43、ically polished endface (PC). The plug of interface IEC 61754-4-5 and interface IEC 61754-4-6 has a ferrule with a spherically polished angled endface which may take any of the angled PC (APC) forms and realizes a physical contact. Table 1 shows the intermateability of interface. Table 1 Intermateab

44、ility of interface Plugs Adaptors/active device receptacles interfaces 61754-4-2 61754-4-4 61754-4-X1 61754-4-X2 61754-4-X3 61754-4-X4 61754-4-1 Mate Mate Not mate Mate Not mate Mate 61754-4-3 Not mate Mate Not mate Not mate Not mate Mate 61754-4-5 Mate Mate Mate Not mate Mate Not mate 61754-4-8 Not

45、 mate Mate Not mate Not mate Mate Not mate Figure 1 is an example of a simplex plug connector interface. Table 2 gives dimensions of the simplex plug connector interface and Table 3 gives the grade of the simplex PC plug connector interface. A chamfer or radius is allowed to a maximum depth of 1,2 m

46、m from the ferrule endface. 8 61754-4 IEC:2013(E) Figure 1 Simplex PC plug connector interface Mechanical datum target Optical datum target Ferrule Coupling sleeve Guide key Guide key View from B direction View from C direction Ferrule endface geometry IEC 1646/13 61754-4 IEC:2013(E) 9 Table 2 Dimen

47、sions of the simplex PC plug connector interface Reference Dimensions Remarks Minimum Maximum A 2,500 mm See Table 3 B 4,8 mm 4,9 mm C 6,8 mm 7,4 mm D 4,9 mm 5,3 mm E 6,7 mm 6,8 mm F 19 23 G 25 35 H 7,15 mm 7,5 mm a I 0,8 mm 1,2 mm J 5,3 mm 5,5 mm K 0,05 mm L 2,11 mm b M 2,0 mm 2,8 mm band cN 6,6 mm

48、 6,8 mm O 1,6 mm 1,8 mm P 8,89 mm 8,99 mm Q 0,8 mm 1,0 mm R 7,29 mm 7,39 mm S 0,8 mm 0,90 mm Radius T 4,05 mm 4,15 mm U 5,4 mm 5,6 mm V 0 mm 0,5 mm b BC 0 0,5 45 chamfer BF 5 mm 30 mm Radius, dBG 0,8 mm Diameter eBI 25 35 Angle aDimension H is given for plug endface when not mated. It is movable by

49、a certain axial compression force, with direct contacting endfaces, and therefore dimension H is variable. Ferrule compression force shall be 7,8 N to 11,8 N when the dimension H is 7 mm 0,1 mm. bCoupling sleeve shall be movable toward right and left direction. These dimensions are given when the coupling sleeve is moved in its most right-direction position. cDimension M shall