IEC 60965-2016 Nuclear power plants - Control rooms - Supplementary control room for reactor shutdown without access to the main control room《核电站.控制室.不通过主控制室的关闭反应堆用的补充控制点》.pdf

《IEC 60965-2016 Nuclear power plants - Control rooms - Supplementary control room for reactor shutdown without access to the main control room《核电站.控制室.不通过主控制室的关闭反应堆用的补充控制点》.pdf》由会员分享，可在线阅读，更多相关《IEC 60965-2016 Nuclear power plants - Control rooms - Supplementary control room for reactor shutdown without access to the main control room《核电站.控制室.不通过主控制室的关闭反应堆用的补充控制点》.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 60965 Edition 3.0 2016-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Nuclear power plants Control rooms Supplementary control room for reactor shutdown without access to the main control room Centrales nuclaires de puissance Salles de commande Salle de commande supplmentaire pour larrt des rac

2、teurs sans accs la salle de commande principale IEC 60965:2016-02(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic

3、or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact

4、 the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris

5、 la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national

6、 de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes In

7、ternational Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Cat

8、alogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.

9、ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC pub

10、lications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent

11、 terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Som

12、e entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Co

13、mmission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constammen

14、t revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rap

15、ports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aus

16、si des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Elect

17、ropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en

18、ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Se

19、rvice Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60965 Edition 3.0 2016-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Nuclear power plants Control rooms Supplementary control room for r

20、eactor shutdown without access to the main control room Centrales nuclaires de puissance Salles de commande Salle de commande supplmentaire pour larrt des racteurs sans accs la salle de commande principale INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 27.12

21、0.20 ISBN 978-2-8322-3203-3 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu

22、cette publication via un distributeur agr. 2 IEC 60965:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 7 2 Normative references. 7 3 Terms and definitions 8 4 Abbreviations 9 5 Design principles . 9 5.1 General . 9 5.2 Main objectives . 10 5.3 Safety principles . 11 5.3.1 Design basis a

23、nd design extension conditions 11 5.3.2 Functionality and qualification 12 5.3.3 Accessibility and operator transfer time 12 5.3.4 Control transfer, control prioritisation and security 12 5.3.5 Operational considerations . 13 5.4 Human factors engineering principles 14 6 Design process 14 7 Function

24、al design 15 7.1 General . 15 7.2 Human factors . 15 7.3 Location and access route . 15 7.4 SCR environment 16 7.5 Space and configuration 16 7.6 Information and control equipment . 17 7.7 Communication systems 17 7.8 Other equipment . 18 7.9 Testing and inspection 18 8 System verification and valid

25、ation 18 Annex A (informative) Assessment of safe transfer time window . 20 Bibliography . 21 IEC 60965:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ NUCLEAR POWER PLANTS CONTROL ROOMS SUPPLEMENTARY CONTROL ROOM FOR REACTOR SHUTDOWN WITHOUT ACCESS TO THE MAIN CONTROL ROOM FOREWORD 1) T

26、he International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical a

27、nd electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical c

28、ommittees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organizatio

29、n for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical commi

30、ttee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is

31、 accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and r

32、egional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and,

33、 in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or a

34、gents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use o

35、f, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that som

36、e of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60965 has been prepared by subcommittee 45A: Instrumentation, control and electrical systems of nuclear facilitie

37、s, of IEC technical committee 45: Nuclear instrumentation. This third edition cancels and replaces the second edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) requireme

38、nts associated with regular testing of the supplementary control room (SCR); b) requirements to assess the time available during which the reactor will be safe but unattended, in order to move from the main control room (MCR) to the SCR and for the SCR to become operational; c) reference to SSR-2/1

39、which includes the following new requirements: 4 IEC 60965:2016 IEC 2016 1) the SCR should be functionally (as well as physically and electrically) separate from the MCR, 2) consideration shall be given to the provision of shielding against radioactivity on the access paths to the SCR; d) reference

40、to DS431, the revision of NS-G-1.3, including the following new requirements: 1) to implement at least two diverse methods for communication with a set of predefined locations, 2) to implement features to support monitoring of trends in key plant parameters; e) requirements for the role, functional

41、capability and robustness of the SCR in design extension conditions; The text of this standard is based on the following documents: FDIS Report on voting 45A/1060/FDIS 45A/1078/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the

42、above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the speci

43、fic publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IEC 60965:2016 IEC 2016 5 INTRODUCTION a) Technical background, main issues and organization of the standard IEC 60965:1989 was developed to provide requirements relevant to the

44、design of NPP supplementary control points for reactor shutdown without access to the main control room. The first edition of IEC 60965 has been used extensively within the nuclear industry. It was however recognized in 2007 that technical developments especially those which were based on software t

45、echnology should be incorporated. It was also recognized that the relationships with the standard for the main control room (i.e. IEC 60964) and the derivative standards to that standard (i.e. IEC 61227, IEC 61771, IEC 61772, IEC 61839, and IEC 62241) should be clarified and conditioned. In 2009 the

46、 second edition of IEC 60965 was published. In June 2013, during the Moscow meeting, WG A8 experts recommended a limited revision be launched to take into account the lessons learned from TEPCO Fukushima Daiichi accident and some comments formulated during the circulation of the FDIS of the publishe

47、d second edition. In the course of development of this revision, the title of the standard was amended to refer to Supplementary Control Room for consistency with IAEA SSR-2/1. This IEC standard specifically focuses on the functional design process of the supplementary control room of an NPP. It is

48、intended that the standard be used by NPP designers, design authorities, vendors, utilities, and by licensors. b) Situation of the current standard in the structure of the IEC SC 45A standard series IEC 60965 is the third level IEC SC 45A document tackling the issue of the design of a supplementary

49、control room. IEC 60965 is to be read in association with IEC 60964 for the design of the main control room (including the derivative standards mentioned above) which is the appropriate IEC SC 45A document providing guidance on operator controls, verification and validation of design, application of visual display units, functional analysis and assignment, and alarm functions and presentation. For more details on the structu