SMPTE ST 2036-3-2015 Ultra High Definition Television - Mapping into Single-link or Multi-link 10 Gb s Serial Signal Data Interface.pdf

《SMPTE ST 2036-3-2015 Ultra High Definition Television - Mapping into Single-link or Multi-link 10 Gb s Serial Signal Data Interface.pdf》由会员分享，可在线阅读，更多相关《SMPTE ST 2036-3-2015 Ultra High Definition Television - Mapping into Single-link or Multi-link 10 Gb s Serial Signal Data Interface.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、 Copyright 2015 by THE SOCIETY OF MOTION PICTURE AND TELEVISION ENGINEERS 3 Barker Avenue., White Plains, NY 10601 (914) 761-1100 Approved September 17, 2015 DP Table of Contents Page Foreword . 2 Intellectual Property 2 Introduction 3 1 Scope . 4 2 Conformance Notation . 4 3 Normative References .

2、4 4 Definition of Terms . 5 5 System Overview . 5 6 UHDTV1 Mapping into Single-link or Dual-link 10G-SDI . 6 6.1 Video Payload Mapping . 6 6.2 Single-link 10G-SDI for System U1.1 to U1.5 8 6.3 Dual-link 10G-SDI for System U1.6 to U1.9. 8 6.4 Optical Interface Characteristics 10 6.5 ANC/Audio Data Ma

3、pping . 10 7 UHDTV2 Mapping into Quad-link or Octa-link 10G-SDI . 12 7.1 Video Payload Mapping . 12 7.2 Quad-link 10G-SDI for System U2.1 to U2.5 . 14 7.3 Octa-link 10G-SDI for System U2.6 to U2.9 15 7.4 Optical Interface Characteristics 15 7.5 ANC/Audio Data Mapping 16 Annex A Bibliography (Informa

4、tive) . 20 Page 1 of 20 pages SMPTE ST 2036-3:2015 Revision of SMPTE ST 2036-3:2012 SMPTE STANDARD Ultra High Definition Television Mapping into Single-link or Multi-link 10 Gb/s Serial Signal/Data Interface SMPTE ST 2036-3:2015 Page 2 of 20 pages Foreword SMPTE (the Society of Motion Picture and Te

5、levision Engineers) is an internationally-recognized standards developing organization. Headquartered and incorporated in the United States of America, SMPTE has members in over 80 countries on six continents. SMPTEs Engineering Documents, including Standards, Recommended Practices, and Engineering

6、Guidelines, are prepared by SMPTEs Technology Committees. Participation in these Committees is open to all with a bona fide interest in their work. SMPTE cooperates closely with other standards-developing organizations, including ISO, IEC and ITU. SMPTE Engineering Documents are drafted in accordanc

7、e with the rules given in its Standards Operations Manual SMPTE ST 2036-3 was prepared by Technology Committee 32NF. Intellectual Property The users attention is called to the possibility that compliance with this standard may require use of an invention covered by patent rights. By publication of t

8、his standard, no position is taken with respect to the validity of this claim or of any patent rights in connection therewith. The patent holder has, however, filed a statement of willingness to grant a license under these rights on reasonable and nondiscriminatory terms and conditions to applicants

9、 desiring to obtain such a license. Details may be obtained from the publisher. No representation or warranty is made or implied that this is the only license that may be required to avoid infringement in the use of this standard. SMPTE ST 2036-3:2015 Page 3 of 20 pages Introduction SMPTE ST 2036 Ul

10、tra High Definition Television suite of documents is in multiple parts. This document is Part 3 of SMPTE ST 2036 and describes UHDTV1, 2 image mapping into a Single-link or a Multi-link 10 Gb/s Serial Signal/Data Interface (10G-SDI) Mode D defined in SMPTE ST 435-2. The source UHDTV (Ultra High Defi

11、nition Television) image sample structures for the interface are defined in SMPTE ST 2036-1 and are listed in Table 1. UHDTV has an image format (sample structure) of 3840 2160 (UHDTV1) or 7680 4320 (UHDTV2). Table 1 Image sample structures and frame rates of UHDTV systems S y s t e m c a t e g o r

12、yS y s t e m n o m e n c l a t u r eL u m a o r R G B s a m p l e s p e r l i n eF r a m e r a t e ( H z )U H D T V13 8 4 0 2 1 6 0 / 2 3 . 9 8 / P 3 8 4 0 2 4 / 1 . 0 0 1L i n e s p e r f r a m e2 1 6 03 8 4 0 2 1 6 0 / 2 4 / P 3 8 4 0 2 42 1 6 03 8 4 0 2 1 6 0 / 2 5 / P 3 8 4 0 2 52 1 6 03 8 4 0 2

13、 1 6 0 / 2 9 . 9 7 / P 3 8 4 0 3 0 / 1 . 0 0 12 1 6 03 8 4 0 2 1 6 0 / 3 0 / P 3 8 4 0 3 02 1 6 03 8 4 0 2 1 6 0 / 5 0 / P 3 8 4 0 5 02 1 6 03 8 4 0 2 1 6 0 / 5 9 . 9 4 / P 3 8 4 0 6 0 / 1 . 0 0 12 1 6 03 8 4 0 2 1 6 0 / 6 0 / P 3 8 4 0 6 02 1 6 0U H D T V27 6 8 0 4 3 2 0 / 2 3 . 9 8 / P 7 6 8 0 2 4

14、 / 1 . 0 0 14 3 2 07 6 8 0 4 3 2 0 / 2 4 / P 7 6 8 0 2 44 3 2 07 6 8 0 4 3 2 0 / 2 5 / P 7 6 8 0 2 54 3 2 07 6 8 0 4 3 2 0 / 2 9 . 9 7 / P 7 6 8 0 3 0 / 1 . 0 0 14 3 2 07 6 8 0 4 3 2 0 / 3 0 / P 7 6 8 0 3 04 3 2 07 6 8 0 4 3 2 0 / 5 0 / P 7 6 8 0 5 04 3 2 07 6 8 0 4 3 2 0 / 5 9 . 9 4 / P 7 6 8 0 6 0

15、 / 1 . 0 0 14 3 2 07 6 8 0 4 3 2 0 / 6 0 / P 7 6 8 0 6 04 3 2 0SMPTE ST 2036-3:2015 Page 4 of 20 pages 1 Scope This document defines UHDTV video payload mapping into Single-link, Dual-link, Quad-link or Octa-link 10G-SDI Mode D defined in SMPTE ST 435-2. This document also defines mapping of ANC, Au

16、dio Data, payload ID and other ancillary data formatted as defined in SMPTE ST 291-1. The “Basic Stream” complies with the interleaved data stream defined in SMPTE ST 292-1 and is utilized as the input source stream s for the 10G-SDI. When transporting UHDTV1,2 signals through a single single-mode f

17、iber, WDM (Wavelength Division Multiplexing) or DWDM (Dense Wavelength Division Multiplexing) as defined in Section 6.4 and Section 7.4 may be used. 2 Conformance Notation Normative text is text that describes elements of the design that are indispensable or text that contains the conformance langua

18、ge keywords: “shall,“ “should,“ or “may.“ Informative text is text that is potentially helpful to the user, but not indispensable, and that can be removed, changed, or added editorially without affecting interoperability. Informative text does not contain any conformance keywords. All text in this d

19、ocument is, by default, normative, except: the Introduction, any section explicitly labeled as “Informative“ or individual paragraphs that start with “Note:”. The keywords “shall“ and “shall not“ indicate requirements strictly to be followed in order to conform to the document and from which no devi

20、ation is permitted. The keywords, “should“ and “should not“ indicate that, among several possibilities, one is recommended as particularly suitable, without mentioning or excluding others; or that a certain course of action is preferred but not necessarily required; or that (in the negative form) a

21、certain possibility or course of action is deprecated but not prohibited. The keywords “may“ and “need not“ indicate courses of action permissible within the limits of the document. The keyword “reserved” indicates a provision that is not defined at this time, shall not be used, and may be defined i

22、n the future. The keyword “forbidden” indicates “reserved” and, in addition, indicates that the provision will never be defined in the future. A conformant implementation according to this document is one that includes all mandatory provisions (“shall“) and, if implemented, all recommended provision

23、s (“should“) as described. A conformant implementation need not implement optional provisions (“may“) and need not implement them as described. Unless otherwise specified, the order of precedence of the types of normative information in this document shall be as follows: Normative prose shall be the

24、 authoritative definition; Tables shall be next; followed by formal languages; then figures; and then any other language forms 3 Normative References The following standards contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication,

25、the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent edition of the standards indicated below. SMPTE ST 291-1:2011, Ancillary Data Packet and Space Formatti

26、ng SMPTE ST 292-1:2012, 1.5 Gb/s Signal/Data Serial Interface SMPTE ST 2036-3:2015 Page 5 of 20 pages SMPTE ST 299-1:2009, 24-Bit Digital Audio Format for SMPTE 292 Bit-Serial Interface SMPTE ST 352:2013, Payload Identification Codes for Serial Digital Interfaces SMPTE ST 372:2011, Dual Link 1.5 Gb/

27、s Digital Interface for 1920 1080 and 2048 1080 Picture Formats SMPTE ST 435-1:2012, 10 Gb/s Serial Signal/Data Interface Part 1: Basic Stream Derivation SMPTE ST 435-2:2012, 10 Gb/s Serial Signal/Data Interface Part 2: 10.692 Gb/s Stream Basic Stream Data Mapping SMPTE ST 435-3:2012, 10 Gb/s Serial

28、 Signal/Data Interface Part 3: 10.692 Gb/s Optical Fiber Interface SMPTE ST 2036-1:2014, Ultra High Definition Television Image Parameter Values for Program Production 4 Definition of Terms 4.1 UHDTV Ultra High Definition Television, having an image format (sample structure) of 3840 2160 or 7680 432

29、0 4.2 UHDTV1 class of UHDTV having an image format (sample structure) of 3840 2160 4.3 UHDTV2 class of UHDTV having an image format (sample structure) of 7680 4320 4.4 Basic Stream a 10-bit parallel stream which has the same structure as the source data stream defined in SMPTE ST 292-1. This interle

30、aved data stream carries the image structure defined in the source format data defined in SMPTE ST 292-1 5 System Overview UHDTV1, 2 images shall be mapped into 4 or 16 Sub images through 2-sample interleave division and shall be mapped into Single-link, Dual-link, Quad-link or Octa-link 10G-SDI Mod

31、e D defined in SMPTE ST 435-2 through Basic Streams that comply with 1.5 Gb/s Serial Digital Interface defined in SMPTE ST 292-1 as shown in Figure 1. When embedding optional ancillary data, the ancillary data packet format shall be in conformance with SMPTE ST 291. Ancillary audio data shall be as

32、defined in SMPTE ST 299-1 and shall be mapped in the following order: (1st) CH1 Basic Stream of 10G-SDI Link 1, up to a maximum of 16 channels at a sampling frequency of 48 kHz or up to a maximum of 8 channels at a sampling frequency of 96 kHz (2nd) CH1 Basic Stream of 10G-SDI Link 2, up to a maximu

33、m of 16 channels at a sampling frequency of 48 kHz or up to a maximum of 8 channels at a sampling frequency of 96 kHz The multiple numbers of Basic Streams conveying the source data of UHDTV images shall be multiplexed and serialized into the Single-link or Multiple-link 10G-SDI as defined in the fo

34、llowing sections. SMPTE ST 2036-3:2015 Page 6 of 20 pages Figure 1 UHDTV1, 2 mapping overview 6 UHDTV1 Mapping into Single-link or Dual-link 10G-SDI 6.1 Video Payload Mapping Table 2 shows the image formats which shall be divided into four Sub images by 2-sample interleave division and shall be mapp

35、ed into the Single-link or the Dual-link 10G-SDI Mode D defined by SMPTE ST 435-2. Each Sub image shall have the 1920 1080 picture format defined as System 1.1, 2.1, 2.2, 2.3, 2.4, 2.5, 4.1, 4.2 or 4.3 in SMPTE ST 435-1. 1 21 2 1 21 21 21 2 1 21 23 43 4 3 43 41 21 2 1 21 21 0 G - S D I L i n k 11 0

36、G - S D I L i n k 2 , 4 o r 8B a s i c S t r e a m 1B a s i c S t r e a m 8B a s i c S t r e a m 1B a s i c S t r e a m 8U H D T V 1 , 23 43 4 3 43 43 43 4 3 43 42 - s a m p l e i n t e r l e a v e d i v i s i o nH D T V C l a s s S u b I m a g e s 1 - 4 o r 1 - 1 6EAVSAVH A N CD a t aS y s t e m 1

37、. 1 , 2 . 1 2 . 5 , 4 . 1 4 . 3d f i n e d i nS M P T E S T 4 3 5 - 1EAVSAVH A N CD a t aS y s t e m 1 . 1 , 2 . 1 2 . 5 , 4 . 1 4 . 3d f i n e d i nS M P T E S T 4 3 5 - 1EAVSAVH A N CD a t aS y s t e m 1 . 1 , 2 . 1 2 . 5 , 4 . 1 4 . 3d f i n e d i nS M P T E S T 4 3 5 - 1EAVSAVH A N CD a t aS y s

38、 t e m 1 . 1 , 2 . 1 2 . 5 , 4 . 1 4 . 3d f i n e d i nS M P T E S T 4 3 5 - 1SMPTE ST 2036-3:2015 Page 7 of 20 pages Table 2 Source image formats of UHDTV1 Class S y s t e m N u m b e rS y s t e m n o m e n c l a t u r eS a m p l i n g S t r u c t u r e / P i x e l D e p t hF r a m e R a t e / s e

39、cS u b - i m a g e f o r m a t d e f i n e d i n S M P T E S T 4 3 5 - 1U 1 . 13 8 4 0 2 1 6 0 / 2 4 / P3 8 4 0 2 1 6 0 / 2 5 / P3 8 4 0 2 1 6 0 / 3 0 / P3 8 4 0 2 1 6 0 / 2 3 . 9 8 / P3 8 4 0 2 1 6 0 / 2 9 . 9 7 / P4 : 2 : 0 o r 4 : 2 : 2( Y C B C R ) / 1 0 - b i t2 4 , 2 5 a n d 3 0 F r a m e s P

40、r o g r e s s i v e2 4 / 1 . 0 0 1 , 3 0 / 1 . 0 0 1 F r a m e s P r o g r e s s i v eS y s t e m 1 . 1U 1 . 23 8 4 0 2 1 6 0 / 2 4 / P3 8 4 0 2 1 6 0 / 2 5 / P3 8 4 0 2 1 6 0 / 3 0 / P3 8 4 0 2 1 6 0 / 2 3 . 9 8 / P3 8 4 0 2 1 6 0 / 2 9 . 9 7 / P4 : 4 : 4 ( R G B ) / 1 0 - b i t2 4 , 2 5 a n d 3 0

41、F r a m e s P r o g r e s s i v e2 4 / 1 . 0 0 1 , 3 0 / 1 . 0 0 1 F r a m e s P r o g r e s s i v eS y s t e m 2 . 2U 1 . 33 8 4 0 2 1 6 0 / 2 4 / P3 8 4 0 2 1 6 0 / 2 5 / P3 8 4 0 2 1 6 0 / 3 0 / P3 8 4 0 2 1 6 0 / 2 3 . 9 8 / P3 8 4 0 2 1 6 0 / 2 9 . 9 7 / P4 : 4 : 4 ( R G B ) / 1 2 - b i t2 4 ,

42、2 5 a n d 3 0 F r a m e s P r o g r e s s i v e2 4 / 1 . 0 0 1 , 3 0 / 1 . 0 0 1 F r a m e s P r o g r e s s i v eS y s t e m 2 . 3U 1 . 43 8 4 0 2 1 6 0 / 2 4 / P3 8 4 0 2 1 6 0 / 2 5 / P3 8 4 0 2 1 6 0 / 3 0 / P3 8 4 0 2 1 6 0 / 2 3 . 9 8 / P3 8 4 0 2 1 6 0 / 2 9 . 9 7 / P4 : 4 : 4 ( Y C B C R ) /

43、 1 0 - b i t2 4 , 2 5 a n d 3 0 F r a m e s P r o g r e s s i v e2 4 / 1 . 0 0 1 , 3 0 / 1 . 0 0 1 F r a m e s P r o g r e s s i v eS y s t e m 2 . 4U 1 . 53 8 4 0 2 1 6 0 / 2 4 / P3 8 4 0 2 1 6 0 / 2 5 / P3 8 4 0 2 1 6 0 / 3 0 / P3 8 4 0 2 1 6 0 / 2 3 . 9 8 / P3 8 4 0 2 1 6 0 / 2 9 . 9 7 / P4 : 2 :

44、 0 , 4 : 2 : 2 o r 4 : 4 : 4 ( Y C B C R ) / 1 2 - b i t2 4 , 2 5 a n d 3 0 F r a m e s P r o g r e s s i v e2 4 / 1 . 0 0 1 , 3 0 / 1 . 0 0 1 F r a m e s P r o g r e s s i v eS y s t e m 2 . 5U 1 . 63 8 4 0 2 1 6 0 / 5 0 / P3 8 4 0 2 1 6 0 / 6 0 / P3 8 4 0 2 1 6 0 / 5 9 . 9 4 / P4 : 2 : 0 o r 4 : 2

45、 : 2( Y C B C R ) / 1 0 - b i t5 0 a n d 6 0 F r a m e s P r o g r e s s i v e6 0 / 1 . 0 0 1 F r a m e s P r o g r e s s i v eS y s t e m 2 . 1U 1 . 73 8 4 0 2 1 6 0 / 5 0 / P3 8 4 0 2 1 6 0 / 6 0 / P3 8 4 0 2 1 6 0 / 5 9 . 9 4 / P4 : 2 : 0 o r 4 : 2 : 2( Y C B C R ) / 1 2 - b i t5 0 a n d 6 0 F r

46、a m e s P r o g r e s s i v e6 0 / 1 . 0 0 1 F r a m e s P r o g r e s s i v eS y s t e m 4 . 1U 1 . 83 8 4 0 2 1 6 0 / 5 0 / P3 8 4 0 2 1 6 0 / 6 0 / P3 8 4 0 2 1 6 0 / 5 9 . 9 4 / P4 : 4 : 4( R G B o rY C B C R ) / 1 0 - b i t5 0 a n d 6 0 F r a m e s P r o g r e s s i v e6 0 / 1 . 0 0 1 F r a m e

47、 s P r o g r e s s i v eS y s t e m 4 . 2U 1 . 93 8 4 0 2 1 6 0 / 5 0 / P3 8 4 0 2 1 6 0 / 6 0 / P3 8 4 0 2 1 6 0 / 5 9 . 9 4 / P4 : 4 : 4( R G B o rY C B C R ) / 1 2 - b i t5 0 a n d 6 0 F r a m e s P r o g r e s s i v e6 0 / 1 . 0 0 1 F r a m e s P r o g r e s s i v eS y s t e m 4 . 3SMPTE ST 2036

48、-3:2015 Page 8 of 20 pages System U1.1 through U1.9 images shall be divided and mapped into the active area of Sub images 1 through 4 by 2-sample interleave division as defined by Figure 4 in SMPTE ST 435-1. Sub images of System U1.1 through U1.9 shall be System 1.1, 2.2 through 2.5, 2.1 or 4.1 thro

49、ugh 4.3 as shown in Table 2 and shall have the digital sample structure as defined in Section 6 through Section 9 of SMPTE ST 274. The 0 components of the 4:2:0 (even-numbered samples on odd-numbered lines of unassigned CBCR) system image data shall be assigned 200h (512(10) in case of a 10-bit system and 800h (2048(12) in case of a 12-bit sys