SANS 15426-2-2008 Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specification Part 2 Two-dimensional symbols《信息技术 自动.pdf

《SANS 15426-2-2008 Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specification Part 2 Two-dimensional symbols《信息技术 自动.pdf》由会员分享，可在线阅读，更多相关《SANS 15426-2-2008 Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specification Part 2 Two-dimensional symbols《信息技术 自动.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22030-3 SANS 15426-2:2008Edition 1 and ISO/IEC corr. 1ISO/IEC 15426-2:2005Edition 1 and corr. 1SOUTH AFRICAN NATIONAL STANDARD Information

4、 technology Automatic identification and data capture techniques Bar code verifier conformance specification Part 2: Two-dimensional symbols This national standard is the identical implementation of ISO/IEC 15426-2:2005/Corr. 1:2008 and is adopted with the permission of the International Organizatio

5、n for Standardization and the International Electrotechnical Commission. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS SANS 15426-2:2008 Edition 1 and ISO/IEC corr. 1 ISO/IEC 15426-2:2005

6、Edition 1 and corr. 1 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee SABS SC 71K, Information technology Automatic identification and data capture techniques, in accordance with procedures of the SABS Standards Division, in com

7、pliance with annex 3 of the WTO/TBT agreement. This SANS document was published in September 2008. ICS 35.040 Ref. No. ISO/IEC 15426-2:2005/Cor.1:2008(E) ISO/IEC 2008 All rights reserved Published in Switzerland INTERNATIONAL STANDARD ISO/IEC 15426-2:2005 TECHNICAL CORRIGENDUM 1 Published 2008-04-15

8、 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATIONINTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION LECTROTECHNIQUE INTERNATIONALEInformation technology Automatic identification and data capture techniques Bar code verifier conformance specification Part

9、2: Two-dimensional symbols TECHNICAL CORRIGENDUM 1 Technologies de linformation Techniques didentification automatique et de capture de donnes Spcifications de conformit des vrificateurs de codes barres Partie 2: Symboles bidimensionnels RECTIFICATIF TECHNIQUE 1 Technical Corrigendum 1 to ISO/IEC 15

10、426-2:2005 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 31, Automatic identification and data capture techniques. SANS 15426-2:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC 154

11、26-2:2005/Cor.1:2008(E) 2 ISO/IEC 2008 All rights reservedPage 11 Replace Table A.2 with the following: Table A.2 Fixed Pattern Damage grading of Figure A.3 Segment Module errors Grade L1 2 3 L2 1 QZL1 1 QZL2 2 3 Clock track and adjacent solid pattern 1 + 1 3 AG = 3,0 2 Therefore grade for Fixed Pat

12、tern Damage is 2 Page 11 Replace Figure A.3 with the following: Figure A.3 Test symbol for Fixed Pattern Damage (Data Matrix) SANS 15426-2:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .Reference numberISO/IEC 15426-2:2005(E)ISO/IEC 2005

13、INTERNATIONAL STANDARD ISO/IEC15426-2First edition2005-03-15Information technology Automatic identification and data capture techniques Bar code verifier conformance specification Part 2: Two-dimensional symbols Technologies de linformation Techniques didentification automatique et de capture de don

14、nes Spcifications de conformit des vrificateurs de codes barres Partie 2: Symboles bidimensionnels SANS 15426-2:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC 15426-2:2005(E) PDF disclaimer This PDF file may contain embedded type

15、faces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infri

16、nging Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were opti

17、mized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO/IEC 2005 All rights reserved. Unless otherwise specified

18、, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case p

19、ostale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO/IEC 2005 All rights reservedSANS 15426-2:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/

20、IEC 15426-2:2005(E) ISO/IEC 2005 All rights reserved iiiContents Page Foreword iv Introduction v 1 Scope 1 2 Conformance . 1 3 Normative references . 2 4 Terms and definitions. 2 5 Symbols . 2 6 Functional requirements 2 6.1 General requirements . 2 6.2 Reflectance calibration. 3 6.3 Mandatory funct

21、ions. 3 6.3.1 Verifiers for multi-row bar code symbols. 3 6.3.2 Verifiers for two-dimensional matrix symbols. 3 6.4 Optional functions 4 7 General constructional and operational requirements . 4 7.1 Installation, operation and maintenance 4 7.2 Power supply. 4 7.3 Temperature 4 7.3.1 Operating tempe

22、rature range. 4 7.3.2 Storage temperature range 4 7.4 Humidity. 4 7.5 Ambient light immunity 5 8 Test requirements . 5 8.1 Test methods. 5 8.1.1 Selection of equipment for testing 5 8.1.2 Scanning parameters 5 8.1.3 Test measurements 5 8.2 Test environment 5 8.3 Primary reference test symbols 5 8.4

23、Test report 6 9 Certification and labelling 7 10 Equipment specification. 7 Annex A (normative) Primary reference test symbols . 8 Annex B (normative) Verification requirements for primary reference test symbols . 13 SANS 15426-2:2008This s tandard may only be used and printed by approved subscripti

24、on and freemailing clients of the SABS .ISO/IEC 15426-2:2005(E) iv ISO/IEC 2005 All rights reservedForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that

25、 are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other internat

26、ional organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in

27、the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at

28、least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 15426-2 was prepared by Joint Techn

29、ical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 31, Automatic identification and data capture techniques. ISO/IEC 15426 consists of the following parts, under the general title Information technology Automatic identification and data capture techniques Bar code verifier conform

30、ance specification: Part 1: Linear symbols Part 2: Two-dimensional symbols SANS 15426-2:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC 15426-2:2005(E) ISO/IEC 2005 All rights reserved vIntroduction The technology of bar coding is

31、 based on the recognition of patterns encoded, in bars and spaces or in a matrix of modules of defined dimensions, according to rules defining the translation of characters into such patterns, known as the symbology specification. Symbology specifications may be categorised into linear symbols, on t

32、he one hand, and two-dimensional symbols on the other; the latter may in turn be sub-divided into multi-row bar codes sometimes referred to as stacked bar codes, and two-dimensional matrix codes. Multi-row bar codes are constructed graphically as a series of rows of symbol characters, representing d

33、ata and overhead components, placed in a defined vertical arrangement to form a (normally) rectangular symbol, which contains a single data message. Each row of the symbol has the characteristics of a linear bar code symbol and may be read by linear symbol scanning techniques. Two-dimensional matrix

34、 symbols are usually rectangular arrangements of modules placed at the intersections of a grid of two (sometimes more) axes; the coordinates of each module need to be known in order to determine its significance, and the symbol must therefore be analysed two-dimensionally before it can be decoded. U

35、nless the context requires otherwise, the term symbol in this part of ISO/IEC 15426 may refer to either type of symbology. The symbol, as a machine-readable data carrier, must be produced in such a way as to be reliably decoded at the point of use, if it is to fulfil its basic objective. Standard me

36、thodologies have been developed for measuring and assessing the quality of symbols for process control and quality assurance purposes during symbol production as well as afterwards. Manufacturers of bar code equipment, the producers of bar code symbols and the users of bar code technology require pu

37、blicly available standard conformance specifications for measuring equipment applying these methodologies, to ensure the accuracy and consistency of performance of this equipment. This part of ISO/IEC 15426 is intended to be similar in technical content (mutatis mutandis) to the linear bar code veri

38、fier conformance standard, ISO/IEC 15426-1, on which it has been based. It should be read in conjunction with the symbology specification applicable to the bar code symbol being tested, which provides symbology-specific detail necessary for its application. SANS 15426-2:2008This s tandard may only b

39、e used and printed by approved subscription and freemailing clients of the SABS .This page is intentionally left blankSANS 15426-2:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .INTERNATIONAL STANDARD ISO/IEC 15426-2:2005(E) ISO/IEC 2005

40、 All rights reserved 1Information technology Automatic identification and data capture techniques Bar code verifier conformance specification Part 2: Two-dimensional symbols 1 Scope This part of ISO/IEC 15426 defines test methods and minimum accuracy criteria applicable to verifiers using the method

41、ologies of ISO/IEC 15415 for multi-row bar code symbols and two-dimensional matrix symbologies, and specifies reference calibration standards against which these should be tested. This part of ISO/IEC 15426 provides for testing of representative samples of the equipment. NOTE ISO/IEC 15426-1 applies

42、 to verifiers for linear bar code symbols. 2 Conformance The instrument shall be considered to conform with this part of ISO/IEC 15426 if it performs the functions defined in 6.3 and if the results of measurements of primary reference test symbols carried out in accordance with Clause 8 demonstrate

43、that the arithmetic means of the ten measurements (for multi-row bar code symbols) or five measurements (for two-dimensional matrix symbols) of individual reported parameters are within the tolerances shown in Table 1 below. Table 1 Tolerances for measured parameter values Parameter Symbology type T

44、olerance Rmaxand/or RsBoth 5 % reflectance Rminand/or RbBoth 3 % reflectance UEC Both 0,0 Decodability Multi-row 0,08 Defects Multi-row 0,08 Codeword Yield Multi-row 0,08 Grid Nonuniformity Matrix 0,06 Modulation Matrix 0,08 of the value measured for the reduced dark widow on a calibrated test symbo

45、l card Fixed Pattern Damage Matrix Within calibrated grade boundaries NOTE The tolerances in Table 1 are additional to any tolerances stated by the supplier of the primary reference test symbols. SANS 15426-2:2008This s tandard may only be used and printed by approved subscription and freemailing cl

46、ients of the SABS .ISO/IEC 15426-2:2005(E) 2 ISO/IEC 2005 All rights reserved3 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the refer

47、enced document (including any amendments) applies. ISO 2859-1:1999, Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection ISO 9001:2000, Quality management systems Requirements ISO/IEC 15415, Information technolo

48、gy Automatic identification and data capture techniques Bar code print quality test specification Two-dimensional symbols ISO/IEC 15416, Information technology Automatic identification and data capture techniques Bar code print quality test specification Linear symbols ISO/IEC 15438, Information tec

49、hnology Automatic identification and data capture techniques Bar code symbology specifications PDF417 ISO/IEC 16022, Information technology International symbology specification Data Matrix ISO/IEC 19762 (all parts), Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary ISO/IEC 18004, Inf