SAE AS 3611A-2011 BOLT MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD PD SHANK COBALT-NICKEL ALLOY UNS R30159 260 KSI MIN《机器螺栓 双六边形扩展垫圈头 UNS R30159 最小值为260 KSI的钴镍合金PD柄》.pdf

《SAE AS 3611A-2011 BOLT MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD PD SHANK COBALT-NICKEL ALLOY UNS R30159 260 KSI MIN《机器螺栓 双六边形扩展垫圈头 UNS R30159 最小值为260 KSI的钴镍合金PD柄》.pdf》由会员分享，可在线阅读，更多相关《SAE AS 3611A-2011 BOLT MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD PD SHANK COBALT-NICKEL ALLOY UNS R30159 260 KSI MIN《机器螺栓 双六边形扩展垫圈头 UNS R30159 最小值为260 KSI的钴镍合金PD柄》.pdf（13页珍藏版）》请在麦多课文档分享上搜索。

1、AEROSPACE STANDARD BOLT, MACHINE DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL ALLOYUNS R30159, 260 KSI MIN AS3611Copyright 2011 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any mea

2、ns, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org I

3、SSUED 2004-03REVISED 2011-06THIRD ANGLE PROJECTION CUSTODIAN: E-25 REV.AFEDERAL SUPPLY CLASS 5306 AS3611SHEET 1 OF 13REV. ASAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineering sciences. Theuse ofthis report is entirely volunta

4、ry, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay bereaffirmed, revised, orcancelled. SAE invites yourwrittencomments an

5、dsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS3611ARATIONALE CORRECT TYPOGRAPHICAL ERROR IN L DIM FOR ALL -54 LENGTHS FOR ALL THREAD DIAMETERS. FIGURE 1 BOLT Copyright SAE International Provided by IHS under lic

6、ense with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS3611SHEET 2 OF 13REV. ABOLT, MACHINE DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL ALLOY UNS R30159, 260 KSI MIN TABLE 1A - DASH NUMBERS AND DIMENSIONS D - H TABLE 1B -

7、 DASH NUMBERS AND DIMENSIONS K - AD NOTES: 1. FOR PARTS WITH A MINIMUM SHANK LENGTH (DIM N) EQUAL TO OR LESS THAN 1.5D THE THREAD PD (DATUM -Z- ) SHALL REPLACE DATUM -Y- . 2. MATERIAL: COBALT-NICKEL ALLOY PER AMS 5842 (UNS R30159). 3. PROCUREMENT SPECIFICATION: AS7475. 4. FLUORESCENT PENETRANT INSPE

8、CTION PER ASTM E 1417. 5. SURFACE TEXTURE: SYMBOLS PER ASME Y14.36M. REQUIREMENTS PER ASME B46.1. UNLESS OTHERWISE SPECIFIED, SURFACES TO BE 125 MICROINCHES Ra. 6. BREAK SHARP EDGES .003 - .015, UNLESS OTHERWISE SPECIFIED. Copyright SAE International Provided by IHS under license with SAENot for Res

9、aleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS3611SHEET 3 OF 13REV. ABOLT, MACHINE DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL ALLOY UNS R30159, 260 KSI MIN 7. DIMENSIONS IN INCHES. 8. DIMENSIONING AND TOLERANCING PER ANSI Y14.5-1982 (A

10、SME PUBLICATION). 9. DO NOT USE UNASSIGNED PART NUMBERS. 10. THE PART NUMBER SHALL CONSIST OF THE BASIC PART NUMBER, FIRST DASH NUMBER DESIGNATING THE NOMINAL DIAMETER AND THE SECOND DASH NUMBER DESIGNATING THE NOMINAL LENGTH IN SIXTEENTHS (.0625) OF AN INCH. EXAMPLE OF COMPLETE PART NUMBER: AS AND

11、AMS ARE SOCIETY OF AUTOMOTIVE ENGINEERS, INC. PUBLICATIONS. ASME IS AN AMERICAN SOCIETY OF MECHANICAL ENGINEERS PUBLICATION. ASTM IS AN ASTM INTERNATIONAL PUBLICATION. TABLE 2 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .1900 NOMINAL DIAMETER BOLTS Copyright SAE International Provided by IHS under

12、 license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS3611SHEET 4 OF 13REV. ABOLT, MACHINE DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL ALLOY UNS R30159, 260 KSI MIN TABLE 3 - PART NUMBER AND SHANK LENGTH DIMENSIONS F

13、OR .2500 NOMINAL DIAMETER BOLTS Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS3611SHEET 5 OF 13REV. ABOLT, MACHINE DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL

14、ALLOY UNS R30159, 260 KSI MIN TABLE 4 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .3125 NOMINAL DIAMETER BOLTS Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS3611SHEET 6 OF 13

15、REV. ABOLT, MACHINE DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL ALLOY UNS R30159, 260 KSI MIN TABLE 5 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .3750 NOMINAL DIAMETER BOLTS Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or network

16、ing permitted without license from IHS-,-,-AEROSPACE STANDARD AS3611SHEET 7 OF 13REV. ABOLT, MACHINE DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL ALLOY UNS R30159, 260 KSI MIN TABLE 6 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .4375 NOMINAL DIAMETER BOLTS Copyright SAE Internation

17、al Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS3611SHEET 8 OF 13REV. ABOLT, MACHINE DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL ALLOY UNS R30159, 260 KSI MIN TABLE 7 - PART NUMBER AND S

18、HANK LENGTH DIMENSIONS FOR .5000 NOMINAL DIAMETER BOLTS Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS3611SHEET 9 OF 13REV. ABOLT, MACHINE DOUBLE HEXAGON EXTENDED WASHER HEAD,

19、PD SHANK, COBALT-NICKEL ALLOY UNS R30159, 260 KSI MIN TABLE 8 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .5625 NOMINAL DIAMETER BOLTS Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STAN

20、DARD AS3611SHEET 10 OF 13REV. ABOLT, MACHINE DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL ALLOY UNS R30159, 260 KSI MIN TABLE 9 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .6250 NOMINAL DIAMETER BOLTS Copyright SAE International Provided by IHS under license with SAENot for ResaleN

21、o reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS3611SHEET 11 OF 13REV. ABOLT, MACHINE DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL ALLOY UNS R30159, 260 KSI MIN TABLE 10 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .7500 NOMINAL DIAMETER BOLT

22、S Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS3611SHEET 12 OF 13REV. ABOLT, MACHINE DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL ALLOY UNS R30159, 260 KSI MIN

23、 TABLE 11 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR .8750 NOMINAL DIAMETER BOLTS Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS3611SHEET 13 OF 13REV. ABOLT, MACHINE DOUBLE

24、HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL ALLOY UNS R30159, 260 KSI MIN TABLE 12 - PART NUMBER AND SHANK LENGTH DIMENSIONS FOR 1.0000 NOMINAL DIAMETER BOLTS Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-