NFPA 1001-2013 Standard for Fire Fighter Professional Qualifications (Effective Date 06 18 2012).pdf

《NFPA 1001-2013 Standard for Fire Fighter Professional Qualifications (Effective Date 06 18 2012).pdf》由会员分享，可在线阅读，更多相关《NFPA 1001-2013 Standard for Fire Fighter Professional Qualifications (Effective Date 06 18 2012).pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、NFPA 1001 Standard for Fire Fighter Professional Qualifications 2013 Edition NFPA, 1 Batterymarch Park, Quincy, MA 02169-7471 An International Codes and Standards Organization Become a Member Subscribe to the Register for Seminars, Webinars, and Online Courses Visit the NFPA CatalogNOTICE AND DISCLA

2、IMER OF LIABILITY CONCERNING THE USE OF NFPA DOCUMENTS NFPA codes, standards, recommended practices, and guides (“NFPA Documents”), of which the document contained herein is one, are developed through a consensus standards development process approved by the American National Standards Institute. Th

3、is process brings together volunteers representing varied viewpoints and interests to achieve consensus on fire and other safety issues. While the NFPA administers the process and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or veri

4、fy the accuracy of any information or the soundness of any judgments contained in NFPA Documents. The NFPA disclaims liability for any personal injury, property or other damages of any nature whatsoever, whether special, indirect, consequential or compensatory, directly or indirectly resulting from

5、the publication, use of, or reliance on NFPA Documents. The NFPA also makes no guaranty or warranty as to the accuracy or completeness of any information published herein. In issuing and making NFPA Documents available, the NFPA is not undertaking to render professional or other services for or on b

6、ehalf of any person or entity. Nor is the NFPA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of re

7、asonable care in any given circumstances. The NFPA has no power, nor does it undertake, to police or enforce compliance with the contents of NFPA Documents. Nor does the NFPA list, certify, test, or inspect products, designs, or installations for compliance with this document. Any certification or o

8、ther statement of compliance with the requirements of this document shall not be attributable to the NFPA and is solely the responsibility of the certifier or maker of the statement. ISBN: 978-145590437-2 (Print) ISBN: 978-145590486-0 (PDF) 8/12 IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA DOCU

9、MENTS IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA DOCUMENTS ADDITIONAL NOTICES AND DISCLAIMERS Updating of NFPA Documents Users of NFPA codes, standards, recommended practices, and guides (“NFPA Documents”) should be aware that these documents may be superseded at any time by the issuance of n

10、ew editions or may be amended from time to time through the issuance of Tentative Interim Amendments. An official NFPA Document at any point in time consists of the current edition of the document together with any Tentative Interim Amendments and any Errata then in effect. In order to determine whe

11、ther a given document is the current edition and whether it has been amended through the issuance of Tentative Interim Amendments or corrected through the issuance of Errata, consult appropriate NFPA publications such as the National Fire Codes Subscription Service, visit the NFPA website at www.nfp

12、a.org, or contact the NFPA at the address listed below. Interpretations of NFPA Documents A statement, written or oral, that is not processed in accordance with Section 6 of the Regulations Governing Committee Projects shall not be considered the official position of NFPA or any of its Committees an

13、d shall not be considered to be, nor be relied upon as, a Formal Interpretation. Patents The NFPA does not take any position with respect to the validity of any patent rights referenced in, related to, or asserted in connection with an NFPA Document. The users of NFPA Documents bear the sole respons

14、ibility for determining the validity of any such patent rights, as well as the risk of infringement of such rights, and the NFPA disclaims liability for the infringement of any patent resulting from the use of or reliance on NFPA Documents. NFPA adheres to the policy of the American National Standar

15、ds Institute (ANSI) regarding the inclusion of patents in American National Standards (“the ANSI Patent Policy”), and hereby gives the following notice pursuant to that policy: NOTICE: The users attention is called to the possibility that compliance with an NFPA Document may require use of an invent

16、ion covered by patent rights. NFPA takes no position as to the validity of any such patent rights or as to whether such patent rights constitute or include essential patent claims under the ANSI Patent Policy. If, in connection with the ANSI Patent Policy, a patent holder has filed a statement of wi

17、llingness to grant licenses under these rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain such a license, copies of such filed statements can be obtained, on request, from NFPA. For further information, contact the NFPA at the address listed below. Law

18、and Regulations Users of NFPA Documents should consult applicable federal, state, and local laws and regulations. NFPA does not, by the publication of its codes, standards, recommended practices, and guides, intend to urge action that is not in compliance with applicable laws, and these documents ma

19、y not be construed as doing so. Copyrights NFPA Documents are copyrighted by the NFPA. They are made available for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of

20、safe practices and methods. By making these documents available for use and adoption by public authorities and private users, the NFPA does not waive any rights in copyright to these documents. Use of NFPA Documents for regulatory purposes should be accomplished through adoption by reference. The te

21、rm “adoption by reference” means the citing of title, edition, and publishing information only. Any deletions, additions, and changes desired by the adopting authority should be noted separately in the adopting instrument. In order to assist NFPA in following the uses made of its documents, adopting

22、 authorities are requested to notify the NFPA (Attention: Secretary, Standards Council) in writing of such use. For technical assistance and questions concerning adoption of NFPA Documents, contact NFPA at the address below. For Further Information All questions or other communications relating to N

23、FPA Documents and all requests for information on NFPA procedures governing its codes and standards development process, including information on the procedures for requesting Formal Interpretations, for proposing Tentative Interim Amendments, and for proposing revisions to NFPA documents during reg

24、ular revision cycles, should be sent to NFPA headquarters, addressed to the attention of the Secretary, Standards Council, NFPA, 1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02169-7471; email: stds_adminnfpa.org For more information about NFPA, visit the NFPA website at www.nfpa.org. 12/11Copyrigh

25、t 2012 National Fire Protection Association . All Rights Reserved. NFPA 1001 Standardfor FireFighterProfessionalQualifications 2013Edition This edition of NFPA 1001, Standard for Fire Fighter Professional Qualifications, was prepared by the Technical Committee on Fire Fighter Professional Qualificat

26、ions and released by the Technical Correlating Committee on Professional Qualifications. It was issued by the Stan- dards Council on May 29, 2012, with an effective date of June 18, 2012, and supersedes all previous editions. This edition of NFPA 1001 was approved as an American National Standard on

27、 June 18, 2012. OriginandDevelopmentofNFPA1001 In 1971, the Joint Council of National Fire Service Organizations (JCNFSO) created the National Professional Qualifications Board (NPQB) for the fire service to facilitate the devel- opment of nationally applicable performance standards for uniformed fi

28、re service personnel. On December 14, 1972, the Board established four technical committees to develop those standards using the National Fire Protection Association (NFPA) standards-making system. The initial committees addressed the following career areas: fire fighter, fire officer, fire service

29、instructor, and fire inspector and investigator. The Committee on Fire Fighter Professional Qualifications met through 1973 and 1974, producing the first edition of this document. The first edition of NFPA 1001 was adopted by the Association in November of 1974. Subsequent to the adoption of the ini

30、tial edition, the committee has met regularly to revise and update the standard. Additional editions were adopted and issued by the NFPA under the auspices of the NPQB in 1981 and 1987. The original concept of the professional qualification standards as directed by the JCNFSO and the NPQB was to dev

31、elop an interrelated set of performance standards specifically for the fire service. The various levels of achievement in the standards were to build on each other within a strictly defined career ladder. In the late 1980s, revisions of the standards recognized that the documents should stand on the

32、ir own merit in terms of job performance requirements (JPRs) for a given field. Accordingly, the strict career-ladder concept was abandoned, except for the progres- sion from fire fighter to fire officer. The later revisions, therefore, facilitated the use of the docu- ments by other than the unifor

33、med fire services. In 1990, responsibility for the appointment of professional qualifications committees and the development of the professional qualifications standards were assumed by the NFPA. The Correlating Committee on Professional Qualifications was appointed by the NFPA Standards Council in

34、1990 and assumed the responsibility for coordinating the requirements of all of the Professional Qualifications documents. For the 1997 edition, NFPA 1001 was converted to the JPR format to be consistent with the other standards in the Professional Qualifications Project. Each JPR consists of the ta

35、sk to be performed; the tools, equipment, or materials that must be provided to successfully complete the task; evaluation parameters and/or performance outcomes; and lists of requisite knowl- edge and skills one must have to be able to perform the task. More information about JPRs can be found in A

36、nnex B. The intent of the technical committee was to develop clear and concise JPRs that can be used to determine that an individual, when measured to the standard, possesses the skills and knowledge to perform as a fire fighter. The committee further contends that these JPRs can be used in any fire

37、 department in any city, town, or private organization throughout North America. 10011 NFPA and National Fire Protection Association are registered trademarks of the National Fire Protection Association, Quincy, Massachusetts 02169.In the 2002 edition of this document, the technical committee made s

38、everal small additions to the standard. The committee also made changes in the document to bring it into conformance with theManualofStyleforNFPATechnical Committee Documents. In the 2008 edition of this document, a complete revision was done. The changes included the following: a skills maintenance

39、 requirement was added, specific knot-tying requirements were deleted and replaced with those required by the authority having jurisdiction, the inspection and public education requirements were moved from Chapter 5 to Chapter 6, and the JPR on flow testing of fire hydrants was deleted from Chapter

40、6. For the 2012 edition of NFPA 1001, the technical committee made several changes, including the use of essential job tasks in consideration for the medical requirement referenced in NFPA 1582, Standard on Comprehensive Occupa- tional Medical Program for Fire Departments. The one-minute time compon

41、ent for donning personal protective clothing has also been removed as the technical committee believe it is more important to perform the procedure correctly, rather than quickly, to keep the person safe. NFPA 1001 also addresses the activation of an emergency call for assistance so that fire fighte

42、rs can be located and rescued. And the termlifesafetyinitiatives replacesprevention in Fire Fighter II to bring attention to the greater issue of community risk reduction. INMEMORIAM Chief Edward T. Bent passed away on March 27, 2012. Ed had a long career as a member of the Los Angeles Fire Departme

43、nt and then moved on to become the first State Director of California State Fire Training. The California State Fire Instructor of the Year Award is named in his honor. He was also a long-time member of the International Fire Service Training Association (IFSTA) and served several terms on the IFSTA

44、 Executive Board. Ed had a long history of involvement with the NFPA, dating back to the 1960s. He was one of the original members of the NFPA 1001, Fire Fighter Professional Qualifications, committee that was formed in 1974. He was also a long-time member of the NFPA Fire Service Training Committee

45、 and held Emeritus Member status at the time of his passing. In 2000, he was awarded the NFPA Committee Member Service Award, which is given for continuous voluntary service as a technical committee member for a substantial period of time in recognition and appreciation of distinguished service to N

46、FPA in the development of NFPA codes and standards. 10012 FIRE FIGHTER PROFESSIONAL QUALIFICATIONS 2013 EditionTechnicalCorrelatingCommitteeonProfessionalQualifications WilliamE.Peterson, Chair Plano, TX M Rep. International Fire Service Training Association DouglasP.Forsman, Champaign Fire Departme

47、nt, IL E R.KirkHankins, Fire Consulting & Case Review International, Inc., MO SE Rep. International Association of Arson Investigators, Inc. AlanE.Joos, Louisiana State University, LA SE Rep. North American Fire Training Directors RaymondMcAllister, City of Las Vegas, NV L Rep. International Associa

48、tion of Fire Fighters WillieG.Shelton, Virginia Department of Fire Programs, VA E Rep. National Board on Fire Service Professional Qualifications PhilipC.Stittleburg, La Farge Fire Department, WI L Rep. National Volunteer Fire Council Alternates FrederickW.Piechota,Jr., National Board on Fire Servic

49、e Professional Qualifications, MA E (Alt. to W. G. Shelton) BryantStiles, Kentucky State Fire Rescue Training Division, KY L (Alt. to P. C. Stittleburg) Nonvoting StephenP.Austin, Cumberland Valley Volunteer Firemens Association, DE L Rep. TC on Traffic Control Incident Management Professional Qualifications JohnMichaelBrackin, Kaplan University, MS U Rep. TC on Accreditation & Certification Professional Qualifications RichardW.Carlson, Okolona Fire Department, KY U Rep. TC on Fire Inspector Professional Qualifications JimA.C