NAVY MIL-W-6015 A (2)-1965 WIRE ROPE 6 BY 19 HIGH STRENGTH (FOR AIRCRAFT LAUNCHING AND ARRESTING)《 高强度6 BY19钢丝(用于飞机起飞和制动)》.pdf

《NAVY MIL-W-6015 A (2)-1965 WIRE ROPE 6 BY 19 HIGH STRENGTH (FOR AIRCRAFT LAUNCHING AND ARRESTING)《 高强度6 BY19钢丝(用于飞机起飞和制动)》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-W-6015 A (2)-1965 WIRE ROPE 6 BY 19 HIGH STRENGTH (FOR AIRCRAFT LAUNCHING AND ARRESTING)《 高强度6 BY19钢丝(用于飞机起飞和制动)》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、5 P MIL-W-6015A (ASG) AMENDMENT-2 14 JUNE 1965 - 3 !-E; 19% Superseding Amt.lir;msn+, -1 MILITARY SPFEIFICATION WIRE: ROPE, 6 BY 19, HIGH-STRENGTH (FOR AIRCRAFT LAUNCHING AND ARRESTING) This amendment forms a part of Military Specification MILW-6015A(ASG), 9 February 1953, and has been approved by t

2、he Department of the Air Force and by the Bureau of Naval Weapons. Page 3, paragraph 3.10: Delete, and substitute: Identification Marker.- A suitable printed tape or tapes shall be The tape or tapes shall not shred or otherwise “3.lO incorporated into the fiber core. become unreadable during the man

3、ufacturing process, guish this grade of wire rope from other grades. more than 1-foot intervals,-e name of the wire rope manufacturer, the nominal diameter of the wire rope, and the words “FOR AIRCRAFT LAUNCHING AND ARRESTING“. This marker tape is to distin- The marker tape shall bear, at not Page 3

4、, paragraph 3.11 Lenpth: Add the following at the end of the paragraph: It, which shall be identified as a shipping reel.“ Page 4, paragraph 4.3 Sampling Tests: f ollolowing : to rpresent eac,h reeled length of wire rope. rope made only from continuous lengths of strands laid helically around a core

5、. Where tested and accepted, the individual shipping reel shall have samples selected as above and tested.“ Delete the first sentence and substitute the Wne 2-1/2 foot sample and one I-foot sample shall be taken from the master reel The master reel shall consist of wire shipping reel cannot be defin

6、itely identified with a master reel which has been Page 5, paragraph 4.4 Rejection and Retest: Delete, and substitute the following: Il4.4 Rejection and Retest: Failure of any specimen to meet the specified mini- m breaking strength requirements shall be cause for rejection of the master length repr

7、esented. of the Inspector, subject specimens from the individual shipping reels to this test. Only one such test may be permitted. Lengths rejected for nonconformance to other requirements of this specification shall be rejected.“ In this case, the manufacturer shall, at his own expense, in the pres

8、ence Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-_ - Ea .- e MIL-W-6015A (2) 40 W 7999906 0487668 9 II MILW-6015A(ASG) Amendment -2 Page 5, add the following new subparagraph: test certificate indicating the master reel from which it was taken an

9、d the test results obtained on the master reel.It t15.i+.1 Each shipping reel shall be numbered and shall have attached to it a Page 6: Delete the IINOTICE“ paragraph. Custodians : Navy - WP Air Force - (11) Reviewer activities: Navy - WP Air Force - (11) Preparing activity: Navy - WP Review/user in

10、formation is current as of the date of this document. coordination of changes to this document, draft circulation should be based on the information in the current Federal Supply Classification Listing of DoD Standardiza- tion Documents. For future .I qa :I Page 2 of 2 pages Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-