NAVY MIL-T-19244 (1)-1962 TRUCK HAND 2-WHEEL COMBINATION TRUCK AND DRAIN RACK《双轮组合货车及排水架手动卡车》.pdf

《NAVY MIL-T-19244 (1)-1962 TRUCK HAND 2-WHEEL COMBINATION TRUCK AND DRAIN RACK《双轮组合货车及排水架手动卡车》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-T-19244 (1)-1962 TRUCK HAND 2-WHEEL COMBINATION TRUCK AND DRAIN RACK《双轮组合货车及排水架手动卡车》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、- MIL-T-19244 (S&A) Amendment -1 11 June 1962 MILITARY SPECIFI CATI03 TRUCK, HAND, 2-WHEEL, COMBINATION TiLUCK AND DRAIN RACK This amendment forms a part of Military Specificetion MIL-T-l9U(S&A), 18 November 1955. Page 2, Paragraph 2.1 add WL-STD-105 - Sampling Procedures and Tables for Iospection b

2、y Attributes, 11 Page 2, Paragraph 3.1.1 - Delete a Substitute: “3.1.1 Preproduction sample - When specified in 6.2, before production is commenced, a sample truck shall be subtted or nade ready for approval by the Contracting Officer or his authorized representative. duction truck shall be manufact

3、ured by the contractor in the same facilities to be used for the manufacture of the producticn items“. The prepro- Pages 6, 7 and 8, Paragraph 4.1 thrm 4.3.4 - Delete and substitute: “4.1 Inspection responsibility.- The supplier is responsible for the performance of all inspection requirements as sp

4、ecified herein. otherwise specified, the supplier may utilize his own or any other inspection facilities and services acceptable to the Government. examination and tests shall be kept complete anfi aviilable to the Government as specified in the contract or order. to perform any of the inspections s

5、et forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. &ept as Inspection records of the The Governmrnt reserves the right. 4.1.1 When performed, sampling inspection sM1 be in accordance with the requirements of M

6、IL-STD-105. 4.2 Preproduction sample inspection.- Wen specified, inspection shall be made of a completely assembled unit to detercline compliance with all requirements specified. 4.3 Inspection.- Inspection shall be performed ta determine compliance with the requirements specified. shall constitute

7、a defect. size shall be.expressed in units of like comporients or completely fabricated end items as applicable. completely fabricated end item as applicable. the supplier is.responsible for insuring that components and materials used me manufactured, .$ested and inspected in accordence with the req

8、uirements of referenced subsidiary specifications and standds &to the extent specified, or, if none, In accordance with this specification. Any departure fro3 a specified requirement When sampling inspection is performed, the lot The sample unit shaU be one (i) component or one (i) * 4.3.1 Component

9、 and material inspection.- In accordance with above, Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-19244 (SU) Amendment-1 11 June 1962 4.3.2 End item inspection.- 4.3.2.1 Visual and dimensional emnation.- Wnen sqle examination is performed, t

10、he inspection level shall be II and the acceptable quality level 4.0 defects per 100 units. inspection level shall be L-7 and the acceptable quality level 4.0 defects per 100 units. be made to assure compliance wit& preservation, packing enQ mz?king requirements specified in Section 5. is performed,

11、 the lot size shall be expressed in units of shipping containers, the sample unit shall be one (i) shipping container, the inspection level shall be L-4 and the acceptable quality level 4.0 defects per 100 units. 4.3.2.2 Testing of end item.- When sample testhg is performed, the 4.3.3 .Inspection of

12、 preparation for delivery.- An inspection shall When.sampling Fnspection of the packing and marking 4.4 Test.- 4.4.1 Maximum load,- The combination truck and drain rzck shall be placed in its rack position on a dry, smooth, level concrete floor. unifornly distributed load of 1800 pounds, 30 inch lon

13、g, shll be placed across the top members of the frame, be left under load for a period of i hour. the load shall be removed and the combnation truck and Erain rack shall be be sufficient evidence of failure to coinply with this specificetion.“ Page 9, Paragraph 6.2, subparagraph (e): .Delete In its

14、entirety. A The combination tmck and drain rack shall After the 1 Lour period has elapsed, I inspected. Any evidence of permanent,deformation, skewing, or fallure shall Preparing Activity: Navy - BUSANDA 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-