NAVY MIL-STD-1322-88-1987 UNIT LOAD FOR DOMESTIC& OVERSEAS SHIPMENT EXPLOSIVE SECTION DESTRUCTOR MK 14 MOD 0 LOADED IN CONTAINER SHIPPING& STORAGE DL5468241《MK 14 MOD 0型破坏性爆破装置 用于国.pdf

《NAVY MIL-STD-1322-88-1987 UNIT LOAD FOR DOMESTIC& OVERSEAS SHIPMENT EXPLOSIVE SECTION DESTRUCTOR MK 14 MOD 0 LOADED IN CONTAINER SHIPPING& STORAGE DL5468241《MK 14 MOD 0型破坏性爆破装置 用于国.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-STD-1322-88-1987 UNIT LOAD FOR DOMESTIC& OVERSEAS SHIPMENT EXPLOSIVE SECTION DESTRUCTOR MK 14 MOD 0 LOADED IN CONTAINER SHIPPING& STORAGE DL5468241《MK 14 MOD 0型破坏性爆破装置 用于国.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-STD-1322 -88 81 M 9999911 0071124 4 m 8 *37* q MI LI TARY STANDARD MIL- ST- 1322-88 CNAW) 6 OCTOBER 1987 UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT EXPLBSIVE SECTION. DESTRUCTOR. MK 14 MOD O. LOADED IN CONTAINER. SHIPPING AND STORAGE, DL6468241 UNIT LOAD DATA DODICINALC NO. ZYHO NUMBER OF EXPL

2、OSIVE SECTIONS PER CONTAINER . I NUMBER OF CONTAINERS PER UNIT LOAD 9 NUMBER OF EXPLOSIVE SECTIONS PER UNIT LOAD. .9 GROSS WEIGHT OF ONE CONTAINER 147 LBS WEIGHT OF WOOD FRAMES. . 123 LBS WEIGHT OF STEEL STRAPPING. . II LBS EIEIGHT OF PALLET 90 LBS GROSS WEIGHT OF UNIT LOAD. . 1547 LBS A CUBE . .46.

3、3 CU FT A DO NOT USE FOR SHIPPING WEIGHT DO NOT STACK MORE THAN 5 UNIT LOADS HIGH IN STORAGE. HAZARD CLASSIFICATION DOT - CLASS A CG - CLASS X-A AMSC NO. - N/A 2 SHIPPING AND STORAGE CONDTION DRAWING NUMBER 53711-5468241 DISTRIBUTION STATEMENT A APPROVED FOR PUBLIC RELEASE : NOTES: I. UNLESS OTHERWI

4、SE SPECIFIED DIMENSIONS ARE IN INCHES. DISTRIBUTION IS UNLIMITED. 2. FOR CROSS REFERENCE TO ASSOCIATED TRUCKLOADING, CONTAINERLOADING AND CARLOADING MILITARY STANDARDS, REFER TO INDEX TO STANDARDS, MIL-HDBK-236 (NAVY). - I FSC 811 THIS UNIT*LQAD 18 AUTHORIZED AND RELEASED FOR DEPOT HANDLING AND THIS

5、 UNIT LOAD SHALL CONSIST OF REQUIREMENTS FOR CONSTRUCTION OF THIS DOCUMENT AND THE LATEST ISSUE OF MIL-ST-1322 CNAWI. STORAGE ANO FOR SHIPMENT BY COMMON CARRIER. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MI L - STD - 132 2 - 88 t N A Wl PALLETI

6、ZING PROCEDURE IA) FABRICATE TWO FRAME ASSEMBLIES AS SHOWN IN DETAIL A WITH THE STRAPPING, ITEM 4, POSITIONED AS SHOWN. TENSION AND DOUBLE NOTCH THE SEAL, ITEM 5, AND SECURE THE STRAPPING WITH STAPLES, ITEM 6. POSITION THE SPACER, ITEM IO (SEE DETAIL CI, IN ONE OF THE FRAME ASSEMBLIES AND NAIL IN PL

7、ACE WITH 12 NAILS, ITEM 13. THREAD TWO STRAPS, ITEM 2, THROUGH SLOTS IN PALLET DECK, ITEM I AND POSITION THE THIRD STRAP ON THE CENTERLINE OF THE PALLET DECK, AS SHOWN IN DETAIL B. POSITION THE FRAME ASSEMBLY WITH THE SPACER, OPEN SIDE UP, ON THE PALLET DECK WITH EQUAL OVERHANG ON THE SIDES AND ENDS

8、. POSITION THE CONTAINERS IDRUMSI IN THE SPACER HOLES. POSITION THE SECOND FRAME ASSEMBLY, OPEN SIE DOWN, OVER THE CONTAINERS (DRUMS). POSITION STRAPPING, ITEM 2, OVER THE UNIT LOAD. TENSION AND DOUBLE NOTCH THE SEAL, ITEM 5. POSITION STRAPPING, ITEM 3, UNDER THE PALLET DECK AND OVER THE UNIT LOAD.

9、TENSION AND DOUBLE NOTCH THE SEAL, ITEM 5. SECURE STRAPPING, ITEMS 2 AND 3, TO THE TOP FRAME ASSEMBLY WITH STAPLES, ITEM 6, AS SHOWN. IN ADDITION TO ANY SPECIAL MARKING REQUIRED BY CONTRACT OR ORDER, THE UNIT LOAD SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-1322 (NAVY). IBI ICI ID1 El (FI (GI IHI MAR

10、K IN G : NOTES: I. ALL MATERIALS SHALL BE IN ACCORDANCE WITH THE BASIC DOCUMENT, MIL-STD-1322 (NAVY). 2. DO NOT USE TYPE I STRAPPING WITH POWER MACHINES. REQD. NAIL, PALLET SEE NOTE I 2 1/2 X .I35 NAIL, PALLET SEE NOTE I 3 1/2 X .I62 3. PLATE TO BE 1/2 X 48 X 48 MINUS SAWCUT. REQD. SEE NOTE I 314 X

11、45 1/4 X 45 1/4 IO SPACER, PLYWOOD PLATE, PLYWOOD SEE NOTE I SEE NOTE 3 4 8 END PIECE SEE NOTE I 2 X 4 X 48 ln 4 7 SIDE PIECE SEE NOTE I 2 X 4 X 45 IR 20 6 STAPLE SEE NOTE I 3/4 8 5 SEAL SEE NOTE I 3/4 2 4 STEEL STRAPPING SEE NOTES I 6 2 :;%T i;“: IA) CUT AND REMOVE OVER THE LOAD 3 3 STEEL STRAPPING

12、 SEE NOTES I b 2 2;: (8) REMOVE TOP FRAME ASSEMBLY, 3 2 STEEL STRAPPING SEE NOTES I 6 2 fi4,! f!: DEPALLETIZING PROCEDURE CTRAPP IN G. . . . . - . , . I I PALLET, WOOD SEE NOTE I 40 X 48 X 5 IR ICI REMOVE CONTAINERS (!XIUMS). (Dl REMOVE BOTTOM FRAME ASSEMBLY. REQD ITEM DESCRIPTION MATL/DWG DIMENSION

13、 PAGE 2 I LICT OF MATERIALS Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-c a MIL-ST-1322-88 (NAWI UNIT LOAD DETAILS CENTER ON THE FRAME. NAIL TO FRAME WITH 12 NAILS PER SIE. / / 3 PER JOINT ICORNERSI DETAIL DETAIL 0 13 314 DIA. 9 HOLES PREPARING ACTIVITY: NAVY-OS REVIEW ACTIVITY: NAVY -OS (PROJECT NO. 8140-N7231 PAGE Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-