NAVY MIL-S-5594 B (1)-1982 SWITCHES TOGGLE ELECTRICALLY HELD SEALED GENERAL SPECIFICATION FOR《密封电子触发器开关的一般规定》.pdf

《NAVY MIL-S-5594 B (1)-1982 SWITCHES TOGGLE ELECTRICALLY HELD SEALED GENERAL SPECIFICATION FOR《密封电子触发器开关的一般规定》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-S-5594 B (1)-1982 SWITCHES TOGGLE ELECTRICALLY HELD SEALED GENERAL SPECIFICATION FOR《密封电子触发器开关的一般规定》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、MILITARY SPECIFICATION SWI JCHES, TOGGLE, ELECTRICALLY HELD SEALED GENERAL SPECIFICATION FOR This Amendment forms a part of Military Specification MIL-S-5594B(AS) dated 9 February 1971 .and is approved for use by the Department of the Navy and is available for use by all Departments and Agencies of

2、the Department of Defense. Page 2 Delete: MI L-W-5086 Wire, Electric, Hook-up and Interconnecting, Polyvinyl Ch1 oride-Insulated , Copper or Copper Alloy Conductor Add : MIL-W-22759 Wire, Electric, F1 uoropolymer Insulated, Copper or Copper Al 1 oy MIL-S-28786 Switches, Preparation for Delivery of P

3、age 5 3.5.2.2 Delete and substi tute: 3.5.2.2 Screw Terminals. Screw Terminals shall be provided with hardware as specified (see 3.1), assembled on the switch or packaged with each individual switch in accordance with MIL-S-28786. 3.5.2.3 Delete “MIL-W-5086 Type II“ and substitute i1MIL-W-22759i 3.5

4、.3.2 Delete and substitute: 3.5.3.2 Mounting .Hardware. The mounting hardware shall be as specified (see 3.1).-For direct Government acquisition, all mounting hardware shall be assembled in proper order as shokm on the applicable Detail Specification Sheet (see 3.1) or packaged with each individual switch in accordance with MIL-S-28786. * U.S. GOVERNMENT PRINTING OFFICE: 198Z“so5-034f4775 2-1 Licensed by Information Handling ServicesProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-