NAVY MIL-DTL-82125 B-1997 CAPE WOMAN-S - EVENING DRESS (OFFICER-S)《女士夜礼服(官员的)》.pdf
《NAVY MIL-DTL-82125 B-1997 CAPE WOMAN-S - EVENING DRESS (OFFICER-S)《女士夜礼服(官员的)》.pdf》由会员分享,可在线阅读,更多相关《NAVY MIL-DTL-82125 B-1997 CAPE WOMAN-S - EVENING DRESS (OFFICER-S)《女士夜礼服(官员的)》.pdf(45页珍藏版)》请在麦多课文档分享上搜索。
1、 MIL-DTL-82L25B m 9999906 2059674 405 m I INCH-POUND I MIL-DTL-82 125B (MC) 16 October 1997 SUPERSEDING MIL-C-82125A (MC) 27 July 1995 DETAIL SPECIFICATION CAPE, WOMANS - EVENING DRESS (OFFICERS) This specification is approved for use by U.S. Marine Corps, Department of the Navy, and is available fo
2、r use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1. Scope. This specification covers requirements for a womans evening dress cape. 1.2. Classification. following sizes (see 6.2). The cape will be of one type in the Schedule of sizes Small Medium Large Beneficial comment
3、s (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to the Commander (PSE-D), Marine Corps Systems Command, Quantico, VA 22134-5010 by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at t
4、he end of this document or by letter. FSC 8410 AMSC N/A DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-82125B 9999906 2059675 341 MIL-DTL-82125B(MC) 1.3. Indiv
5、idual orders. .When cape is custom tailored to an individual order, this specification will govern, except the detail requirements of Table I may be modified to the extent necessary for good custom tailoring practice. 2. APPLICABLE DOCUMENTS 2.1. General. The documents listed in this section are spe
6、cified in sections 3 and 4 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. every effort has been made to ensure the completeness of this list, document users are cautioned that they
7、 must meet all specified requirements documents cited in sections 3 and 4 of this specification, whether or not they are listed. While 2.2. Government documents. 2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the
8、 extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation (see 6.2) . SPECIFICATIONS FEDERAL A-A-50196 - Thread, Silk
9、A-A-52071 - Tape, Textile, Cotton, General Purpose (Unbleached, Bleached, or Dyed) A-A-52094 - Thread, Cotton A-A-52105 - Cloth, Interlining, Cotton or Synthetic Warp, DDD-L-20 - Label: For Clothing, Equipage, and Tentage, and Spun Hair-Wool or Rayon Filling (General Use) * DEPARTMENT OF DEFENSE MIL
10、-C-368 - Cloth, Satin, Rayon and Cloth, Twill, Rayon MIL-DTL-3461- Button, Insignia, Metal, Uniform and Cap MIL-C-21115 - Cloth, Tropical: Wool, Polyester/Wool 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-DTL-82125B m 9999906 2059676 288 m
11、. MIL-DTL-82125B (MC) STAN DARDS FEDERAL FED-STD-191 - Textile Test Methods FED-STD-751 - Stitches, Seams, and Stitchings (Unless otherwise indicated, copies of the above specifications, standards, handbooks are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
12、 Philadelphia, PA 19111-5094.) 2.3. Non-Government publications. The following document(s) form a part of this document to the extent specified herein. Unless otherwise specified, the issues of the documents which are DoD adopted are those listed in the issue of the DoDISS cited in the solicitation.
13、 Unless otherwise specified, the issues of documents not listed in the DoDISS are the issues of the documents cited in the solicitation (see 6.2). ANSI/ASQC 21.4- Sampling Procedures and Tables for Inspection by Attributes (Application for copies should be addressed to The American National Standard
14、s Institute, 11 West 42nd Street, New York, NY 10036) Department of Defense (DoD) Standard Color Card of Official Standardized Shades for Sewing Threads 1968 (Application for copies should be addressed to The Color Association of the United States, Inc., 409 W. 44th Street, New York, NY 10016-0927).
15、 2.4. Order of precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIRE
16、MENTS 3.1. Standard sample. Standard samples are furnished solely for guidance and information to the contractor (see 6.3). Variation Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-821258 90b 2059677 114 . MIL-DTL-82 125B (MC) from this spec
17、ification may appear in the sample, in which case the specification shall govern. 3.2. First article. When specified (see 6.2), a sample shall be subjected to first article inspection in accordance with 4.3. 3.3. Materials 3.3.1 Basic material. The basic material shall be cloth, tropical, polyester/
18、wool blend, Marine Corps black, shade 2607 (see 6.4), 8.5 to 9.5 ounces, conforming to type III of MIL-C-21115. 3.3.2 Lininq. The material for lining the cape shall be cloth, satin, rayon; scarlet, shade 2504, 4.5 ounces, conforming to class 3 of MIL-C-368. 3.3.3 Coat fronts and collar interlininq.
19、The material for the body of the coat front, collar, and collar stand shall be cloth, warp, spun hair-wool filling, plain weave, conforming to type II O A-A-52105. 3.3.4 Hanqer braid. The braid for cape hanger shall be cotton or rayon tubular flat braid 1/8 to 3/16 inch wide, and shall have a breaki
20、ng strength of not less than 75 pounds in the warp direction. The color shall be black and shall show good fastness to crocking and wet (dry) cleaning. 3.3.5 Tape 1/4 inch. The tape for the front and arm slit edges of the cape shall be 1/4 inch wide, conforming to type II, class 1 of A-A-52071. 3.3.
21、6 Thread 3.3.6.1. Silk thread. The silk thread shall conform to A-A-50196. I, ticket No. A for all outside seaming and stitching, inside seaming, and stitching for body lining. The thread for hand sewing shall be type III, ticket No. C, 2-ply. The thread for machine sewing shall conform to type 3.3.
22、6.2. Cotton thread. The cotton thread shall conform to A-A-52094, type III, mercerized finished, ticket No. A, 3-ply for all inside seaming and stitching except body lining; type II, glazed finish, ticket No. 16, 4-ply for sewing on buttons and 4 Provided by IHSNot for ResaleNo reproduction or netwo
23、rking permitted without license from IHS-,-,- MIL-DTL-82125B m Ob 2059678 050 m MIL-DTL-82 12 5B (MC) snap fasteners. The thread for basting shall be a good commercial grade. 3.3.6.3. Color and colorfastness. The thread shall be black, except the silk thread for seaming and stitching the body lining
24、 shall be scarlet. The cotton thread for basting may be white. The colored threads shall show good fastness to wet (dry) cleaning and, in addition, the silk thread shall show good fastness to light (see DoD Standard Color Card of Official Standardized Shades for Sewing Threads 1968). 3.3.7 Insiqnia
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- NAVYMILDTL82125B1997CAPEWOMANSEVENINGDRESSOFFICERS 女士 夜礼服 官员 PDF
链接地址:http://www.mydoc123.com/p-978897.html