NAVY MIL-B-2128 D-1991 BURNERS STEAM AND OIL PRESSURE ATOMIZING《蒸汽油压雾化燃炉》.pdf
《NAVY MIL-B-2128 D-1991 BURNERS STEAM AND OIL PRESSURE ATOMIZING《蒸汽油压雾化燃炉》.pdf》由会员分享,可在线阅读,更多相关《NAVY MIL-B-2128 D-1991 BURNERS STEAM AND OIL PRESSURE ATOMIZING《蒸汽油压雾化燃炉》.pdf(15页珍藏版)》请在麦多课文档分享上搜索。
1、MIL-B-2128D 45 m 9999706 O476460 7 m MILB-2128D(SH) 7 MAP 1991 SUPERSEDING 8 March 1% MIL-B-2128C(SHIPS) MILITARY SPECIFICATION BURNERS, STEAM AND OIL PRESSURE, ATOMIZING This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all
2、departments and agencies of the Department of Defense. 1, SCOPE 1.1 Scope. This specification covers the straight pressure, vented plunger and steam pressure atomizing oil burners for use in fossil fueled propulsion boilers aboard Naval ships. Burner assemblies consist of the atomizer, air register,
3、 and safety shutoff devices. 1,2 Classification, Burners must be of the following types and classes as specified (see 6.2): Type A Type C Type D Class 1 Class 2 Straight pressure atomizing fuel oil burners Steam and oil pressure atomizing burners Vented plunger pressure atomizing fuel oil burners Fo
4、r normal mounting through boiler furnace double casing For mounting through boiler furnace double casing with air register hinged to provide for furnace access. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be
5、 addressed to: Commander, Naval Sea Systems Command, SEA 5523, Department of the Navy, Washington, DC 2362-5101 by using the self-addressed Standardmtion Document Improvement Proposai (DD Form 1426) aDoearine at the end of this document or bv letter. AMSC NIA FSC 4530 DISTRIBUTION STATEMENT A. Appro
6、ved for public release; distribution is unlimited. e Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- - - . - MIL-B-2228D 45 997790b 0476463 9 2. APPLICABLE DOCUMENTS 2.1 Government documents. 2.1.1 Specifications and standards. this document to the
7、extent specified The following specifications and standards form a part of herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (se
8、e 6.2). SPECIFICATIONS FEDERAL FF-N-836 FF-S-85 FF-S-86 FF-S-92 FF-s-200 FF-s-210 MILITARY MIL-S- 1222 MIL-T-5624 MILP-15024 MIL-P- 15024/5 MIL-F-16884 STANDARDS MILITARY MIL-STD-278 Nut: Square, Hexagon, Cap, Slotted, Castle, Knurled, Welding and Single Ball Seat Screw, Cap, Slotted and Hexagon Hea
9、d Screw, Cap, Socket-Head Screw, Machine: Slotted, Cross-Recessed or Hexagon Head Setscrews: Hexagon Socket and Spline Socket, Headless o Setscrews: Square Head (Inch) and Slotted Headless (Inch and Metric) Studs, Bolts, Hex Cap Screws, Socket Head Cap Screws and Nuts Turbine Fuel, Aviation, Grades
10、JP-4, JP-5, and JP-WJP-8 ST Plates, Tags, and Bands for Identification of Equipment Plates, Iden ti fica tion Fuel, Naval Distillate Welding and Casting Standard (Unless otherwise indicated, copies of federal and military specifications and standards are available from the Standardization Documents
11、Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.) 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B-2 128D (SH) 2.1.2 Other Government documents, drawings, and publications, The following other Government documents, dra
12、wings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues are those cited in the solicitation. DRAWING NAVAL SEA SYSTEMS COMMAND (NAVSEA) 803-5959293 Typical Arrangement of Fuel Oil Burner Leads for Boiler (Applications for copies sho
13、uld be addressed to the Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.) NAVAL SHIP SYSTEMS ENGINEERING STATION (NAVSSES) 4168 4171 4173 4461 4514 4543 4787 4789 4790 llY1308 llY1309 Sprayer Plate, Racer-Navjet Stream Atomizer Sprayer Plate - Stand
14、ard High Capacity Sprayer Plate - Standard Straight Mechanical, Dished and Fiat Assembly of Vented Plunger Atomizer for 21 Inch Convergent Throat V P Atomizer Skirt Diffuser for Use with 21 Inch Convergent Throat NAVSSES 21 Inch Convergent Throat Ring NAVSSES 16-7/8 Inch and 18 Inch Convergent Throa
15、t Ring for B and W Boilers V P Atomizer Skirt Diffuser for B and W Burner and Convergent Throat Assembly of VP Atomizer for 16-7/8 Inch and 18 Inch Dia. Convergent Throat Registers Detail of Sprayer Nut Detail of Nozzle Body (Application for copies should be addressed to Naval Ships Systems Engineer
16、ing Station, Code 022C, Philadelphia, PA 19112-5083.) 2.2 Non-Government publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of the documents which are DOD adopted are those listed in the issue of the DODISS cited
17、in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS are the issues of the documents cited in the solicitation (see 6.2). AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI) B 165 Pipe Hanges and Flanged Fittings; (DOD adopted) (Application for copies should be
18、addressed to the American Standards Institute, 1430 Broadway, New York, NY 10018.) 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-_- - _. - MIL-B-212D Li5 = 9999906 0476463 2 MIGB-2 128D (SH) AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) A 105
19、 D 3951 E 18 Standard Specification for Forgings, Carbon Steel, for Piping Components Standard Practice for Commercial Packaging; (DOD adopted) Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials; (DOD adopted) (Application for copies should be addressed to the American Society
20、 for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.) (Non-Government standards and other publications are normally available from the organizations that prepare or distribute the documents. These documents also may be available in or through libraries or other informational service
21、s.) 23 Order of precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIR
22、EMENTS 3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection (see 6.5) in accordance with 4.4. 3.2 General construction. Construction shall be light and compact to the greatest extent practicable and consistent with requirements herein. Fabrication weld
23、ing and inspection shall be in accordance with MIL-STD-278. 3.2.1 General description. Each burner specified herein shall consist of an adjustable air register of the swirl nonventuri type, atomizer assembly, and safety shutoff device. Burners shall be constructed to prevent buckling, warping, or ja
24、mming of parts that require adjustments. Material shall be of a Navy approved type for the conditions encountered. The material of burner parts subjected to radiant heat (up to 1600 OF) from the furnace shall be of Navy approved heat-resisting alloy. Burners shall burn Naval distillate fuel that con
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- NAVYMILB2128D1991BURNERSSTEAMANDOILPRESSUREATOMIZING 蒸汽 油压 雾化 PDF
链接地址:http://www.mydoc123.com/p-977209.html