NAVY A-A-51439-1986 TUBING SURGICAL (PLASTIC)《外科管(塑料)》.pdf

《NAVY A-A-51439-1986 TUBING SURGICAL (PLASTIC)《外科管(塑料)》.pdf》由会员分享，可在线阅读，更多相关《NAVY A-A-51439-1986 TUBING SURGICAL (PLASTIC)《外科管(塑料)》.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、. - 1 A-A-53437 65 m 7997974 0027373 2 m - c.-q$sq A-A- 5 14 3 9 9 May 1986 COMMERCIAL ITEM DESCRIPTION TUBING, SURGICAL (Plastic) The General Services Administration has authorized the use of this commercial item description. This commercial item description covers plastic tubing suitable for use w

2、ith surgical suction apparatus. Salient characteristics: Material. The tubing shall be fabricated from flexible Polyvinyl Chloride (PVC). This material shall comply with the physical and biological requirements listed below. Physical/Biological properties: Hardness. The tubing shall have a Shore Har

3、dness of A50 to A100 when tested in accordance with ASTM (American (Society for Testing and Materials) D2240. Tensile strength. The tubing shall have a tensile strength of 1000 to 3500 psi and an ultimate elonqation of 200 to 450 percent when tested in accordance with ASTM D638. Water absorption. Th

4、e tubing 24-hour water absorption shall not exceed 1.0% of its own weight when tested as specified in ASTM D570 . Toxicity. Class VI testing in accordance with the “Systemic Injection Test“ listed in the latest edition of the USP under “Biological Tests- Plastics.“ The tubing shall be non-toxic when

5、 subjected to Style and design. The tubing shall be non-sterile, non- conductive, and disposable. The tube shall not rupture or split when tested in acco2dance with ASTM D1599. Minimum failure pressure shall be 51 psig, FSC 6515 DISTRIBUTION STATEMENT A. is unlimited. AMSC N/A 0 Approved for public

6、release; distribution THIS DOCUMENT CONTAINS . -a- PAGES. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-51437 65 7777774 0027172 4 = COMMERCIAL ITEM DESCRIPTION A-A-51439 Dimensions. Tubing dimensions shall be as follows: a. Overall length: 50

7、ft. -0, +2 inches. b. Inside diameter: 5/16 + 1/32 inch. c. Wall thickness: 1/16 +-1/32 inch. - Finish. The suction tube shall have a smooth, uniform finish overall. Workmanship. fish eyes, pimples, pits, warpage, foreign matter, and any other defects which detract from its appearance or impair its

8、serviceability. The tubing shall be free from blisters, Unit. (EA). One tube, as specified, constitutes one unit. Quality Assurance Provisions. Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of al1 inspec

9、tion requirements as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the rig

10、ht to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made avai

11、lable to the Government upon the Governments request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies .to which such records relate. Records. Inspection. Inspection, as used herein, is defined as both examinatio

12、n (such as visual or auditory investigation without the use o% special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item. Tests. Tests shall be conducted to determine compliance with specification requirements. Where f

13、easible, the same sample shall be used for the determination of two or more test characteristics. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-51437 65 797777q 0027173 b - -. -. COMMERCIAL ITEM DESCRIPTION A-A-51439 Sampling for tests. Sampl

14、ing for tests shall be conducted in accordance with MIL-STD-105. Inspection level shall be Level II; AQL (Acceptable Quality Level) shall be 1.5%. test purposes shall be one tubing. The unit of product for Contractor certification. The contractor shall certify that the Droduct offered meets the sali

15、ent characteristics of this description - and conforms to the producers own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the p

16、rovisions of the contract. Regulatory requirements. this document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of the Federal Fo

17、od, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal, State, and local statutes, ordinances, and regula

18、tions. Federal Food, Drug and Cosmetic Act. If the product covered by Recovered materials. The offeror/contractor is encouraged to use recovered material in accordance with Public Law 94-580 to the maximum extent practical. Preservation, packaging, packing, labeling, and marking. Unless otherwise sp

19、ecified, preservation, packaging, and packing shall be to a degree of protection to preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc., involving shipment from the supply source to the receiving activity, plus reshipment from receiving activity, an

20、d shall conform to applicable carriers rules and regulations. package quantities and labeling and marking shall be as specified in the contract and/or order. Intermediate and exterior NOTE: The following National Stock Numbers are covered by this document: NSN ITEM IDENTIFICATION - 6515-01-168-0566

21、TUBING, SURGICAL, Plastic, 5/16 inch (7.94mm) Inside Diameter, 50 feet (15.24 Meters) Long 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3 A-A-511137 b5 7777774 00271711 mi* -7- COMMERCIAL ITEM DESCRIPTION A-A-51439 Ordering data. and marking mus

22、t be specified in the contract and/or order). (Intermediate/exterior package quantities and labeling MILITARY INTERESTS: Preparing Activity: Custodians: DoD-MB Army - MD Navy - MS Air Force - 03 Agent: DLA-DM CIVIL AGENCY COORDINATING ACTIVITY: VA-OSS 51097 Project No. 6515-3533 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-