ITU-T S 6-1988 CHARACTERISTICS OF ANSWERBACK UNITS (ITA2)《应答器(国际二号电码)的特性》.pdf

《ITU-T S 6-1988 CHARACTERISTICS OF ANSWERBACK UNITS (ITA2)《应答器(国际二号电码)的特性》.pdf》由会员分享，可在线阅读，更多相关《ITU-T S 6-1988 CHARACTERISTICS OF ANSWERBACK UNITS (ITA2)《应答器(国际二号电码)的特性》.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、INTERNATIONAL TELECOMMUNICATION UNION)45G134 3 TELECOMMUNICATIONSTANDARDIZATION SECTOROF ITU4%,%2!0(9!,0(!“%4)#!,G0G04%,%2!0(G0G04%2-).!,%15)0-%.4#(!2!#4%2)34)#3G0G0/(b) that start-stop equipment is capable of receiving communications without the help of an operator;(c) that this advantage is useful

2、 to users of the international Telegraph Alphabet No. 2 (ITA2);(d) that it is therefore desirable that the identity of either the calling or the called party should be capable ofbeing checked;(e) that it may be necessary to verify the correct functioning of the line and of the distant terminalequipm

3、ent;(f) that it is desirable to give confidence to the calling party that the reception of the called stations answer-back code is related to the proper working of that station as a whole,unanimously declares the view(1) that a code transmitter filling the requirements specified below should be supp

4、lied for the subscriberssets taking part in the international telex and gentex services and, upon request, for other telegraph services using start-stop equipment and ITA2;(2) that operation of the code transmitter should be effected by the sequence of signals figure-shift D(combinations Nos. 30 and

5、 4) in ITA2;(3) that, for services 1)other than gentex, the answerback code emission should be composed of a series of20 signals, as follows:1 letter-shift or figure-shift;1 carriage-return;1 line-feed;16 signals chosen by each Administration for the subscribers code signal;1 letter-shift; (optional

6、 see the Recommendation cited in 8);(4) that, for the gentex service1), the answerback code emission should be composed of a series of 20 signals,as follows:1 carriage-return,1 line-feed,1 figure-shift,16 signals chosen by each Administration in accordance with Recommendation F.21 5,1 letter-shift;_

7、1)As regards the information to be conveyed by answerback codes and the order of presentation of that information, referenceshould be made to the Recommendation cited in 6 for the telex service or to Recommendation F.21 5 for the gentex serviceor to Recommendation F.130 7 for maritime mobile service

8、s.2 Fascicle VII.1 - Rec. S.6(5) that, when a telex or gentex answer-back code includes less than 16 significant characters chosen by theAdministration, the necessary number of filling characters should be inserted in accordance withRecommendation F.60 4 or F.21 5 respectively;(6) that, for services

9、 other than telex and gentex, when the answerback code includes less than 16 significantcharacters, it is necessary to insert as many letter-shifts as are necessary, by distributing them among the significantcharacters, to make up the total of 16 signals. This would give the calling subscriber the c

10、hance of noting clearly theend of the requested code transmission;(7) that if a complex installation connected to the telex network incorporates both outgoing-only terminalsand terminals which may be called, then the call number of the group of terminals which may be called, or of one ofthem, should

11、 appear in the answerback code of the outgoing-only terminal.Administrations may also wish to apply this to public installations connected to the telex network which notonly transmit but also receive and distribute messages;(8) that the answerback signals should comply with the transmission characte

12、ristics specified inRecommendation S.3;(9) that the delay between the beginning of reception of the start unit of combination No. 4 by the equipmentin the “figures” position and the beginning of the start unit of the first signal in the answerback sent by this equipmentshould lie between: 150 and 60

13、0 ms for 50-baud equipment; 100 and 600 ms for 75-baud equipment; 75 and 600 ms for 100-baud equipment;(10)that the start-stop equipment in the telex service should be designed so that reperforators should notperforate the Who are you? (WRU) signal (figure-shift D);(11) that manufacturers should be

14、informed that the answer-back mechanism should preferably be constructedso that the 20 positions in the answer-back code may be freely used for any combination in ITA2.References1 CCITT Recommendation Characteristics of answer-back units for start-stop apparatus of the telex service,Green Book, Vol.

15、 VII, Rec. S.6, ITU, Geneva, 1973.2 CCITT Recommendation Answer-back units for 75-baud start-stop apparatus in accordance with InternationalAlphabet No. 2, Green Book, Vol. VII, Rec. S.6 bis, ITU, Geneva, 1973.3 CCITT Recommendation Answer-back units for 100-baud start-stop apparatus in accordance w

16、ithInternational Alphabet No. 2, Green Book, Vol. VII, Rec. S.6 ter, ITU, Geneva, 1973.4 CCITT Recommendation Operational provisions for the international telex service, Rec. F.60.5 CCITT Recommendation Composition of answer-back codes for the international gentex service, Rec. F.21.6 CCITT Recommendation Operational provisions for the international telex service, Rec. F.60, 3.4.2.7 CCITT Recommendation Maritime answer-back codes, Rec. F.130.8 CCITT Recommendation Operational provisions for the international telex service, Rec. F.60, 3.4.2.4.