INTERN ESP J-14 301-GS-2001 Cork Plugs - General Specifications (Noun Code - 6400)《软木塞 一般规范(名词代码 6400)》.pdf

《INTERN ESP J-14 301-GS-2001 Cork Plugs - General Specifications (Noun Code - 6400)《软木塞 一般规范(名词代码 6400)》.pdf》由会员分享，可在线阅读，更多相关《INTERN ESP J-14 301-GS-2001 Cork Plugs - General Specifications (Noun Code - 6400)《软木塞 一般规范(名词代码 6400)》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、INTERNATIONAL TRUCK AND ENGINE CORPORATION I WRITTEN/REVIE WED BY: PPROVED BY: Corporate Technical Standards Corporate Technical Standards Engineering Standard Parts SUPERSEDES ISSUE OF: April 1989 UMBER: p ESP-J-14.301-GS TITLE: Cork Plugs - General Specifications (Noun Code - 6400) DATE: August 20

2、01 IChange Notice: Reformatted. Preferred Parts moved to ESP-J-14.321-PP. GENERAL SPECIFICATIONS MATERIAL: Commercial cork, Type I (uncemented) for sizes through number 19 and Type I or Type 11 (cemented) for sizes larger than number 19; Grade B. Class 2 per Federal Standard LLL-S-731. DEFECTS: Plug

3、s will be free from all defects that affect their serviceability. This document is restricted and may not be sent outside International Truck and Engine Corporation or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 02001 International Truck and Engine Corporation. August 200 1 Page 1 of 1 Copyright International Truck and Engine Corporation Provided by IHS under license with INTERNNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-