GOST EN 620-2012 Continuous handling equipment and systems Fixed belt conveyers for bulk materials Safety and EMC requirements《连续搬运设备和系统 散料用固定式皮带输送装置 安全和EMC要求》.pdf

《GOST EN 620-2012 Continuous handling equipment and systems Fixed belt conveyers for bulk materials Safety and EMC requirements《连续搬运设备和系统 散料用固定式皮带输送装置 安全和EMC要求》.pdf》由会员分享，可在线阅读，更多相关《GOST EN 620-2012 Continuous handling equipment and systems Fixed belt conveyers for bulk materials Safety and EMC requirements《连续搬运设备和系统 散料用固定式皮带输送装置 安全和EMC要求》.pdf（48页珍藏版）》请在麦多课文档分享上搜索。

1、 , () INTERSTATE COUNCIL FOR STANDARDIZATION, METROLOGY AND CERTIFICATION (ISC) EN 620 2012 (EN 620:2002+A1:2010, IDT) 2014 EN 620 2012 , 1.092 . 1.22009 . , . , , , 1 - () , 4 2 3 , ( 03.12.2012 . 54-) : (ISO 3166) 00497 (ISO 3166) 00497 BY KG KZ RU UZ 4 06 2014 . 897- EN 6202012 01 2014. 5 EN 620:

2、2002+A1:2010 Continuous handling equipment and systems. Safety and EMC requirements for fixed belt conveyers for bulk materials ( . ). : 1.5 ( 3.6). 1:2010 EN 620:2002 ( ) ( ) . CEN/TC 148 . , , 2006/42/, ZA, ZB. (en). , , . (IDT) 6 II EN 620 2012 , . () . , , 2014 , III EN 620 2012 V 1 . 1 2 2 3 .

3、4 4 6 5 () . 8 6 () 27 7 . 30 () . 34 ZA () 2006/42/ . 35 Z () 37 () . 38 41 IV EN 620 2012 EN 1070:1998. . , : - , ; - , ; - ; - , , ; - ; - ; - , 0% 100% ; - , , : ) , , ; b) ;) , , . EN 617, EN 618 EN 741. V EN 620 2012 Continuous handling equipment and systems. Fixed belt conveyers for bulk mate

4、rials. Safety and EMC requirements 2014 07 01 1 1.1 , , , 4. , , 3.13.2.4, () () . . 1.2 , 15 40 . 1.3 , : a) , ; b) , , ;c) , ;d) , , , ; e) , ;f) ;g) , (. 3.2);h) ;i) , (, ); j) , , , , ;k) ( ) ;l) , ;m) , , EN 61000 -6 -2:1999; n) , (, ); o) , ;p) , ;q) , . , . 94/9/, , , , . 1 EN 620 2012 94/9/.

5、 2 (). (), () ( ). . EN 294:1992 Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs ( . ) EN 349:1993 Safety of machinery Minimum gaps to avoid crushing of parts of the human body ( . ) EN 418:1992 Safety of machinery Emergency stop equipment Functional asp

6、ects Principles for design ( . . . ) EN 457:1992 Safety of machinery Auditory danger signals General requirements Design and testing (ISO 7731:1986, modified) ( . . , ) EN 563:1994 Safety of machinery Temperatures of touchable surfaces Ergonomics data to establish temperature limit values for hot su

7、rfaces ( . . ) EN 574:1996 Safety of machinery Two-hand control devices Functional aspects Principles for design ( . . . ) EN 614-1:1995 Safety of machinery Ergonomic design principles Part 1: Terminology and general principles ( . . 1. , ) EN 617 Continuous handling equipment and systems Safety and

8、 EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers ( . , , ) EN 618 Continuous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of bulk material except fixed belt conveyors ( . , , ) EN 619 Continu

9、ous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of unit loads ( . , ) EN 741 Continuous handling equipment and systems Safety requirements for systems and their components for pneumatic handling of bulk materials ( . ) EN 811:1996 Safety of machin

10、ery Safety distances to prevent danger zones being reached by the lower limbs ( . ) EN 842:1996 Safety of machinery Visual danger signals General requirements Design and testing ( . . , ) EN 953:1997 Safety of machinery Guards General requirements for the design and construction of fixed and movable

11、 guards ( . . ) 2 EN 620 2012 EN 954-1:1996 Safety of machinery Safety related parts of control systems Part 1: General principles for design ( . . 1. ) EN 1005-1:2001 Safety of machinery Human physical performance Part 1: Terms and Definitions ( . . 1. ) EN 1005-2 Safety of machinery Human physical performance Part 2: Manual handling of machinery and component parts of machinery ( . . 2. ) EN 1005-3:2002 Safety of machinery Human physical performance Part 3: Recommended force limits for machinery operation ( . . 3. ) EN 1037:1995 Safety of machinery Prevention of unexpected start-up ( .