GMKOREA EDS-M-6804-2003 PVC FILM SELF ADHESIVE (VERSION 3).pdf

《GMKOREA EDS-M-6804-2003 PVC FILM SELF ADHESIVE (VERSION 3).pdf》由会员分享，可在线阅读，更多相关《GMKOREA EDS-M-6804-2003 PVC FILM SELF ADHESIVE (VERSION 3).pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、GM DAEWOO Auto & Technology EDSE ngineering,GM DAEWOO Auto & Technology.Standards PVC FILM SELF ADHESIVE EDS-M-6804 ISSUED DATE: 1991. 08. 20 REVISEDDATE: 2003. 05. 16 VERSION: 3EDS-M-6804 PVC FILM SELF ADHESIVE PAGE: 1/2 ISSUED DATE: 2003. 05. 16 REVISED DATE: 2003. 05. 16 VERSION: 3 GM DAEWOO Auto

2、 & Technology 1. PURPOSE This specification specifies the requirements of basic property for patterns and qualities of the PVC-film used in frame. 2. SCOPE This standard is applied to the label that is adhered to frame. 3. MATERIAL PVC-film applied with adhesive in one side is covered with silicon p

3、aper. 4. REQUIREMENTS DESIGNATION TEST METHOD SPECIFICATION4.1 Structure4.1.1 Film (without adhesive)(1) Material Dyed and lettered PVC(2) Lettering and dimensions See drawing(3) Weight per unit area EDS-T-7611 75 g/m 2 min.(4) Tensile strength EDS-T-7132-F1) Longitudinal direction 40 N/cm min.2) Tr

4、ansverse direction 40 N/cm min.4.1.2 Adhesive(1) Material Determination with IR-spectrum for initial sample4.1.3 Protectant of adhesive side(1) Material Paper coated with silicon in one side(2) Weight per unit area EDS-T-7611 60 g/m 2 min.(3) Width (width of roller) 30 - 35 mm(4) Tensile strength ED

5、S-T-7132-J 70 N/cm min. It must be higher than adhesion of adhesive side.4.2 Requirements of film in adhered state4.2.1 Resistance to peel EDS-T-7676 2 N/cm min. 5. ADDITIONAL REQUIREMENTS 5.1. The film shall have the adhesion enough to be detached from a protectant without damages.EDS-M-6804 PVC FI

6、LM SELF ADHESIVE PAGE: 2/2 ISSUED DATE: 2003. 05. 16 REVISED DATE: 2003. 05. 16 VERSION: 3 GM DAEWOO Auto EDS-M- 0102). 7. AUTOMOTIVE RESTRICTED HAZARDOUS SUBSTANCES Materials and components of parts must comply with EDS-A-0101. 8. CODING SYSTEM This material specification shall be indicated in draw

7、ings or other specifications as follows. “EDS-M-6804” 9. RELATED STANDARDS EDS-A-0101 Automotive restricted hazardous substances for parts EDS-M-0102 Procedures for approval of chemical raw material and quality control EDS-T-7132 Test method for tensile strength & elongation EDS-T-7611 Test method for determining weight per unit area EDS-T-7676 Determining of the resistance to peel of self adhesive tapes and foils