GMKOREA EDS-A-1002-2008 DRAWING TYPES.pdf

《GMKOREA EDS-A-1002-2008 DRAWING TYPES.pdf》由会员分享，可在线阅读，更多相关《GMKOREA EDS-A-1002-2008 DRAWING TYPES.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、GM DAEWOO Auto & Technology EDS Engineering, GM DAEWOO Auto & Technology Standards DRAWING TYPES Do Not Use on New Programs. Being Replaced by Global Design Standards EDS-A-1002 ISSUED DATE: 1988. 03. 26 REVISED DATE: 2008. 05. 31 VERSION: 5 (Superceded) EDS-A-1002DRAWING TYPES PAGE: 1/11 ISSUED DAT

2、E: 1998. 03. 26 REVISED DATE: 2008. 05. 31 VERSION: 5 GM DAEWOO Auto & Technology Note: This standard may be applied only for current project drawings generated by CATIA. It is Superceded for all future projects and replaced by Global Design Standards. 1. PURPOSE This standard aims at specifying the

3、 type of drawings and their use. 2. SCOPE This standard applies to all drawings used in GM DAEWOO Auto & Technology Company (hereinafter referred to as the “GMDAT“). 3. TYPE OF DRAWINGS 3.1. PACKAGE DRAWING 3.2. SKIN DRAWING 3.3. LAYOUT DRAWING 3.4. DETAIL DRAWING 3.4.1. PART DRAWING 3.4.2. CHART DR

4、AWING 3.4.3. REWORK DRAWING 3.4.4. ASSEMBLY DRAWING 3.4.5. INSTALLATION DRAWING 3.4.6. INSPECTION DRAWING 3.4.7. SKETCH DRAWING EDS-A-1002DRAWING TYPES PAGE: 2/11 ISSUED DATE: 1998. 03. 26 REVISED DATE: 2008. 05. 31 VERSION: 5 GM DAEWOO Auto & Technology 3.1. PACKING DRAWING Drawings that represent

5、basics of the vehicle including basic dimensions, such as overall length, width, height, wheel base and tread, shape and position of such parts as seat and instrument panel, interior position of the pedals, and arrangement of the engine and power train. EDS-A-1002DRAWING TYPES PAGE: 3/11 ISSUED DATE

6、: 1998. 03. 26 REVISED DATE: 2008. 05. 31 VERSION: 5 GM DAEWOO Auto & Technology 3.2. SKIN DRAWING Drawings that represent the skin line of the body and shape of the seat, instrument panel, etc. EDS-A-1002DRAWING TYPES PAGE: 4/11 ISSUED DATE: 1998. 03. 26 REVISED DATE: 2008. 05. 31 VERSION: 5 GM DAE

7、WOO Auto & Technology 3.3. LAYOUT DRAWING Drawings for reflecting opinions of each design parts and for checking all items, which include parts mounting condition, relation between parts, body structure, routing of pipes and wiring, operating condition of chassis parts, waterproofing, noise isolatio

8、n, safety, maneuverability, assembling facility, to determine the specifications of parts. This stage just precedes the detail drawing generation. EDS-A-1002DRAWING TYPES PAGE: 5/11 ISSUED DATE: 1998. 03. 26 REVISED DATE: 2008. 05. 31 VERSION: 5 GM DAEWOO Auto & Technology 3.4. DETAIL DRAWING Drawin

9、gs released to final users where all items necessary for manufacturing, assembly and inspection of parts are indicated. 3.4.1. PART DRAWING Drawings that represent specifications of only one part EDS-A-1002DRAWING TYPES PAGE: 6/11 ISSUED DATE: 1998. 03. 26 REVISED DATE: 2008. 05. 31 VERSION: 5 GM DA

10、EWOO Auto & Technology 3.4.2. CHART DRAWING Drawings that represent several parts of similar specifications by charts EDS-A-1002DRAWING TYPES PAGE: 7/11 ISSUED DATE: 1998. 03. 26 REVISED DATE: 2008. 05. 31 VERSION: 5 GM DAEWOO Auto & Technology 3.4.3. REWORK DRAWING Drawings that represent added spe

11、cifications resulting from working, such as drilling, hammering and cutting, in the unit part or assembly stage after parts are completed. EDS-A-1002DRAWING TYPES PAGE: 8/11 ISSUED DATE: 1998. 03. 26 REVISED DATE: 2008. 05. 31 VERSION: 5 GM DAEWOO Auto & Technology 3.4.4. ASSEMBLY DRAWING Drawings t

12、hat represent two or more parts by the purchase unit or assembly unit which are joined by such methods as welding, riveting, and bolting. It may not be necessary to designate the part number to each component. The material for coating and painting is not regarded as a component. EDS-A-1002DRAWING TY

13、PES PAGE: 9/11 ISSUED DATE: 1998. 03. 26 REVISED DATE: 2008. 05. 31 VERSION: 5 GM DAEWOO Auto & Technology 3.4.5. INSTALLATION DRAWING Drawings for each portion or function that represent vehicle components by the purchase unit or assembly unit in the mounted condition in order to show the mounting

14、condition or the relation between adjacent parts. EDS-A-1002DRAWING TYPES PAGE: 10/11 ISSUED DATE: 1998. 03. 26 REVISED DATE: 2008. 05. 31 VERSION: 5 GM DAEWOO Auto & Technology 3.4.6. INSTRUCTION DRAWING 1) Drawings to indicate or explain the working methods or assembly procedures by figures. 2) Dr

15、awings which do not belong to any of the above categories. In other words, drawings showing several parts regardless of the assembly unit, purchase unit, or mounting condition. EDS-A-1002DRAWING TYPES PAGE: 11/11 ISSUED DATE: 1998. 03. 26 REVISED DATE: 2008. 05. 31 VERSION: 5 GM DAEWOO Auto & Technology 3.4.7. SKETCH DRAWING Drawings which are not used for mass production, but are provisionally used for such purposes as the build order or prototype construction.