FORD WSS-M4D977-A2-2006 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M4D977-A)《聚.pdf

《FORD WSS-M4D977-A2-2006 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M4D977-A)《聚.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M4D977-A2-2006 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M4D977-A)《聚.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2006 07 21 Revised Inserted 3.0; Deleted 3.1, 3.2, 3.3, 3.9, 3.10 150 x 1 x 4 mm specimen specimen A) Test speed shall be 5 mm/minute for all materials. Provide a curve of tensile stress/strain using one specimen at each of the following tempe

2、ratures: 23, 50, 80 and 105 C. For ductile materials, the curve shall cover strain through yield point. ENGINEERING MATERIAL SPECIFICATIONWSS-M4D977A/A2 Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 6 of 9 ENGINEERING MATERIAL SPECIFICATIONWSS-M4D977A/A2 Printed

3、copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 7 of 9 ENGINEERING MATERIAL SPECIFICATIONWSS-M4D977A/A2 Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 8 of 9 ENGINEERING MATERIAL SPECIFICATIONWSS-M4D977A/A2 Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 9 of 9