FORD WSS-M2P185-A8-2010 PAINT PERFORMANCE ENGINES NON-METALLIC SUBSTRATES MIN PERFORMANCE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M2P185-A1)《发动机非金属基板的涂料性能和最小性能 与福.pdf

《FORD WSS-M2P185-A8-2010 PAINT PERFORMANCE ENGINES NON-METALLIC SUBSTRATES MIN PERFORMANCE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M2P185-A1)《发动机非金属基板的涂料性能和最小性能 与福.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M2P185-A8-2010 PAINT PERFORMANCE ENGINES NON-METALLIC SUBSTRATES MIN PERFORMANCE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M2P185-A1)《发动机非金属基板的涂料性能和最小性能 与福.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2010 12 14 N-STATUS A5, A6, A7, A8 TO BE N-STATUS. No replacement named G. Weber, NA 2004 09 10 Revised WSS-M2P185-A5/A6/A7 para 2, 3.5, 3.6, 3.7, 3.8, 3.9, 3.10, 3.11, all of 3.12 3.3 added; titles for A1 A4 revised D. G. Green 1997 10 13 Act

2、ivated G. Weber, K. Wolters Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 5 PAINT PERFORMANCE, ENGINES, METALLIC SUBSTRATES, WSS-M2P185-A1 ALSO FOR ENGINE INTERIOR, MAX PERFORMANCE PAINT PERFORMANCE, ENGINES, METALLIC SUBSTRATES, WSS-M2P185-A2 HIGH PERFORMAN

3、CE PAINT PERFORMANCE, METALLIC SUBSTRATES ENGINES, WSS-M2P185-A3 STANDARD PERFORMANCE PAINT PERFORMANCE, ENGINES, METALLIC SUBSTRATES, WSS-M2P185-A4 MIN PERFORMANCE PAINT PERFORMANCE, ENGINES, NON-METALLIC SUBSTRATES, WSS-M2P185-A5 ALSO FOR ENGINE INTERIOR, MAX PERFORMANCE NOT TO BE USED FOR NEW DES

4、IGN PAINT PERFORMANCE, ENGINES, NON-METALLIC SUBSTRATES, WSS-M2P185-A6 HIGH PERFORMANCE NOT TO BE USED FOR NEW DESIGN PAINT PERFORMANCE, ENGINES, NON-METALLIC SUBSTRATES, WSS-M2P185-A7 STANDARD PERFORMANCE NOT TO BE USED FOR NEW DESIGN PAINT PERFORMANCE, ENGINES, NON-METALLIC SUBSTRATES, WSS-M2P185-

5、A8 MIN PERFORMANCE NOT TO BE USED FOR NEW DESIGN 1. SCOPE These specifications define the performance requirements of various types of engine paint systems, when applied over both Rigid (Metallic) and Non-Rigid (Plastic) Substrates. 2. APPLICATION These specifications were released originally to def

6、ine paint performance for engine blocks, oil pans, engine accessories, brackets, etc. as well as sheet metal and plastic parts within the engine compartment. WSS-M2P185-A1: Paint systems per this specification provide excellent adhesion, chemical and heat resistance as well as superior corrosion pro

7、tection for and stone chip resistance. They are designed for highly visible applications and can also be used in engine interiors, e.g. the oil pan. Appropriate paint systems are cathodic electrocoat primers with added application of powder coat where increased stone chip resistance properties are r

8、equired. WSS-M2P185-A2: Paint systems according to this specification provide good adhesion; chemical and heat resistance as well as good corrosion protection and stone chip resistance. They are designed for highly visible applications, e.g. engine blocks. Appropriate paint systems are electrocoat p

9、rimer or high film build powdercoat. WSS-M2P185-A3: Paint systems according to this specification provide moderate chemical and heat resistance and moderate corrosion protection. Appropriate paint systems are low/medium film build powdercoat or engine enamel. ENGINEERING MATERIAL SPECIFICATIONWSS-M2

10、P185-A1/A8 Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 2 of 5 WSS-M2P185-A4: Paint systems according to this specification provide limited corrosion resistance. They are for minor applications or invisible parts only. Any applicable paint system may be used. WS

11、S-M2P185-A5/A8: Paint systems according to these specifications provide protection and cosmetic enhancement for Flexible Substrates. Whilst corrosion resistance is not a consideration with flexible substrates, there are heat, hot oil, water immersion, coolant and fuel resistance requirements, which

12、have to be satisfied. These resistance capabilities follow the same numerically orientated property structures listed in WSS-M2P185-A1/A4. Paint systems capable of satisfying WSS-M2P185-A5/A8 requirements will invariably require a substrate surface pre-treatment in the form of flaming, plasma or pri

13、ming in order to achieve the required adhesion characteristics. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.3 PRETREATMENT 3.3.1 Cleaning Sheet

14、 metal parts, castings and plastic components as specified on the Engineering Drawing must be cleaned to be free from oil, rust, dirt, fingerprints, moisture and other foreign materials. 3.3.2 Phosphating Steel parts according to WSS-M2P185-A1/A2 shall be zinc phosphated and conform to the requireme

15、nts of WSS-M3P1-D. For steel parts according to WSS-M2P185-A3 any applicable pretreatment may be used while parts according to WSS-M2P185-A4 do not require specific pre-treatment. 3.3.3 Flaming/Plasma/Priming Polypropylene parts/components/panels according to WSS-M2P185-A5/A8 will invariably require

16、 a surface pre-treatment in the form of flaming, plasma or priming in order to impart the top coat paint system with the necessary adhesion characteristics capable of satisfying the performance levels of these Specifications. 3.4 TOPCOAT The paint materials shall be applied as required in the approp

17、riate material specifications and/or as recommended by the supplier. 3.4.1 Color and Gloss Black or gray and semi gloss or as specified on Engineering Drawing 3.4.2 Initial Hardness The finish shall be sufficiently hard after curing to with stand normal handling without damage. ENGINEERING MATERIAL

18、SPECIFICATIONWSS-M2P185-A1/A8 Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 3 of 5 3.5 ADHESION (FLTM BI 106-01, Method B) A1 for tests per para 3.11.12 and 3.11.13 use common brands. All test liquids (name, supplier) must be noted in the Initial Sample Report. W

19、here test liquids involve the use of water * (coolant and windscreen wash) de-mineralized water should be used. Test Fuels are defined in FLTM AZ 105-02: Gasoline - Super, with Methyl Tertiary Butyl CME15A Ether (3.11.8) Gasoline - Super, with Ethanol (3.11.9) CE22A Alternative Fuel, with Ethanol (E

20、85) (3.11.10) CE85A Alternative Fuel, with Methanol (M85) (3.12.11) CM85A 5.3 PROVING GROUND RESISTANCE - DETP (00.00R-311, p3-76-A) Paint systems according to these specifications support the following Customer Requirements in effect January, 1997. A1 visible; cooler, non-visible fuel system engine brackets parts. mounts