FORD WSS-M1H1224-A-2011 FABRIC SEVILLA PATTERN WARP KNITTED TO BE USED WITH FORD WSS-M99P1111-A 《塞维利亚模式经纱编织的织物 与福特WSS-M99P1111-A 一起使用》.pdf

《FORD WSS-M1H1224-A-2011 FABRIC SEVILLA PATTERN WARP KNITTED TO BE USED WITH FORD WSS-M99P1111-A 《塞维利亚模式经纱编织的织物 与福特WSS-M99P1111-A 一起使用》.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M1H1224-A-2011 FABRIC SEVILLA PATTERN WARP KNITTED TO BE USED WITH FORD WSS-M99P1111-A 《塞维利亚模式经纱编织的织物 与福特WSS-M99P1111-A 一起使用》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2011 05 24 Activated M.Fontes - FSAO Printed copies are uncontrolled Copyright 2011, Ford Global Technologies, LLC Page 1 of 2 FABRIC, SEVILLA PATTERN, WARP KNITTED WSS-M1H1224-A 1. SCOPE The material defined by this specification is a warp k

2、nitted polyester fabric. The fabric has been developed using a trilaminated construction. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for B402 2012MY Project. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall me

3、et all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolera

4、nce (ASTM D 3775) Warp 120 yarn/10 cm Fill 140 yarn/10 cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) Face Fabric 245 g/m 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp -167dtex, Semi Dull, Round, Textured Polyester -110 dtex, Semi Dull, Round,

5、 Textured Polyester -75dtex, Bright, Flat Yarn Trilobal, Polyester ENGINEERING MATERIAL SPECIFICATION WSS-M1H1224-A Printed copies are uncontrolled Copyright 2011, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Warp Solution Dyed 3.6 FINISHING OPERATIONS Wash, Heat Set 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.