FORD WSS-M18P12-A-2007 SEALANT - THREAD DRY FILM - TO BE USED WITH FORD WSS-M99P1111-A 《干膜、线型密封剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

《FORD WSS-M18P12-A-2007 SEALANT - THREAD DRY FILM - TO BE USED WITH FORD WSS-M99P1111-A 《干膜、线型密封剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M18P12-A-2007 SEALANT - THREAD DRY FILM - TO BE USED WITH FORD WSS-M99P1111-A 《干膜、线型密封剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2007 08 30 Revised Inserted 3.0; Deleted 3.1, 3.2, 3.3, 3.7, 3.8 & 4 2000 02 11 Editorial no technical change APC 1989 10 31 Released SM/ER2526TC J. Lines EAO Fasteners A. Cockman E.Staff Fasteners Printed copies are uncontrolled Copyright 20

2、07, Ford Global Technologies, LLC Page 1 of 1 SEALANT - THREAD, DRY FILM WSS-M18P12-A 1. SCOPE This specification defines the performance requirements for sealants which are applied to threaded parts. 2. APPLICATION This specification was originally released for bolts, screws where thread sealing is

3、 required. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 APPLICATION OF THE SEALANT Parts will be received in a coated condition. The responsib

4、ility for application of the sealant and method of application shall be that of the parts supplier. 3.5 PERFORMANCE REQUIREMENTS (WSPM WX201) The coatings when applied to ISO metric coarse threaded bolts, screws, shall ensure that the Thread Sealing performance requirements conform to the Worldwide Standard Parts Manual specification WX201. The Thread Sealing tests shall be carried out as specified in WX201 3.6 CORROSION RESISTANCE Corrosion test requirements defined in the protective finish specifications shall apply after application of the thread sealant material.