FORD WSS-M11G28-A2-2004 DECORATIVE WOOD VENEER WALNUT-JUGLANS NIGRA QUARTER CUT TO BE USED WITH FORD WSS-M99P1111-A 《径切割的黑胡桃（JUGLANS NIGRA）木饰面薄板 与标准FORD WSS-M99P1111-A一起使用 列于标准.pdf

《FORD WSS-M11G28-A2-2004 DECORATIVE WOOD VENEER WALNUT-JUGLANS NIGRA QUARTER CUT TO BE USED WITH FORD WSS-M99P1111-A 《径切割的黑胡桃（JUGLANS NIGRA）木饰面薄板 与标准FORD WSS-M99P1111-A一起使用 列于标准.pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M11G28-A2-2004 DECORATIVE WOOD VENEER WALNUT-JUGLANS NIGRA QUARTER CUT TO BE USED WITH FORD WSS-M99P1111-A 《径切割的黑胡桃（JUGLANS NIGRA）木饰面薄板 与标准FORD WSS-M99P1111-A一起使用 列于标准.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2004 10 22 Activated C. Bezant Printed copies are uncontrolled Copyright 2004, Ford Global Technologies, LLC Page 1 of 1 DECORATIVE WOOD VENEER, WALNUT-JUGLANS NIGRA, CROWN CUT WSS-M11G28-A1 DECORATIVE WOOD VENEER, WALNUT-JUGLANS NIGRA, QUARTE

2、R CUT WSS-M11G28-A2 DECORATIVE WOOD VENEER, WALNUT-JUGLANS NIGRA, CURL CUT WSS-M11G28-A3 DECORATIVE WOOD VENEER, WALNUT-JUGLANS NIGRA, BURL CUT WSS-M11G28-A4 1. SCOPE These specifications define wood veneers for use as decorative product on interior wood veneer assemblies. A1 = Walnut Juglans Nigra,

3、 Crown Cut A2 = Walnut Juglans Nigra, Quarter Cut A3 = Walnut Juglans Nigra, Curl Cut A4 = Walnut - Juglans Nigra, Burl Cut 2. APPLICATION The specifications WSS-M11G28-A1/A4 were released for materials used for wooden decorative automotive components, initially for Aston Martin components. Applicat

4、ion of lacquer and other products will need to be considered to provide a suitable finished product. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. When in the fully assembled form the veneer assembly must perform to the Material specificat

5、ion requirements of WSS-M15P34-B1 or as specified on the engineering drawing. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 MATERIAL PROPERTIES 3.2.1 Appearanc

6、e Color, feature and grain to be as per Master samples 3.2.2 Thickness Nominal thickness - 0.6mm 3.2.3 Moisture content 11 - 18% 3.2.4 Density A1/A2/A3/A4 670.2 +/- 50 Kgm-33.3 PERFORMANCE PROPERTIES Veneer selected for its attractive appearance should be uniform in thickness, smooth, flat, free from decay and have face grain suitable for the intended face grade