FORD WSL-M12G87-A-2012 REFLECTIVE SLEEVE LAMINATED ALUMINUM FOIL AND WOVEN GLASS FIBER TO BE USED WITH FORD WSS-M99P1111-A 《层压铝箔和编织的玻璃纤维反射套管 与福特WSS-M99P1111-A 一起使用》.pdf

《FORD WSL-M12G87-A-2012 REFLECTIVE SLEEVE LAMINATED ALUMINUM FOIL AND WOVEN GLASS FIBER TO BE USED WITH FORD WSS-M99P1111-A 《层压铝箔和编织的玻璃纤维反射套管 与福特WSS-M99P1111-A 一起使用》.pdf》由会员分享，可在线阅读，更多相关《FORD WSL-M12G87-A-2012 REFLECTIVE SLEEVE LAMINATED ALUMINUM FOIL AND WOVEN GLASS FIBER TO BE USED WITH FORD WSS-M99P1111-A 《层压铝箔和编织的玻璃纤维反射套管 与福特WSS-M99P1111-A 一起使用》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 02 2012 01 18 N Status No replacement named N. Benipal, NA 2006 08 24 Revised Inserted 3.0; Deleted 3.1, 3.2, 3.3, 3.11 and 4 1992 09 18 Released NL00E10182180000 L. Gullen Controlled document at www.MATS Copyright 2012, Ford Global Techn

2、ologies, LLC Page 1 of 1 REFLECTIVE SLEEVE, LAMINATED ALUMINUM FOIL AND WSL-M12G87-A WOVEN GLASS FIBER NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material described by this specification is a woven fiberglass (type E) fabric laminated to aluminum foil. 2. APPLICATION This specification was released

3、originally for material used to provide thermal protection for power steering hoses used in high temperature light truck applications. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Materia

4、l suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 TENSILE STRENGTH, min (ASTM D 1682, Method 1C-E) Warp 42.9 N/mm Fill 38.5 N/mm 3.5 TEAR STRENGTH, min (ASTM D 1117, Section 14) Warp 220 N Fill 310 N 3.6 BURST STRENGTH, m

5、in 3.7 MPa (ASTM D 774) 3.7 PEEL STRENGTH, min 0.1 N/mm (ASTM D 1876, after 30 minute immersion in brake fluid) 3.8 WEIGHT 730 +/- 50 g/m2 (ASTM D 3776) 3.9 THICKNESS 0.76 +/- 0.08 mm (ASTM D 1777, pressure 0.7 - 7.0 kPa) 3.10 FLAME RESISTANCE, max (ASTM D 4723, ID No. 36, Ref. Method: Fed. Std. 191A/5903.1) Char Length 25.4 mm Afterglow 12 s Flameout 5 s