FORD WSK-M8B18-A-2006 ADDITIVE ANTI FREEZE WINDSHIELD WASHER INITIAL FILL TO BE USED WITH FORD WSS-M99P1111-A 《初始注入的挡风玻璃喷洗器用防冻添加剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

《FORD WSK-M8B18-A-2006 ADDITIVE ANTI FREEZE WINDSHIELD WASHER INITIAL FILL TO BE USED WITH FORD WSS-M99P1111-A 《初始注入的挡风玻璃喷洗器用防冻添加剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf》由会员分享，可在线阅读，更多相关《FORD WSK-M8B18-A-2006 ADDITIVE ANTI FREEZE WINDSHIELD WASHER INITIAL FILL TO BE USED WITH FORD WSS-M99P1111-A 《初始注入的挡风玻璃喷洗器用防冻添加剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2006 12 08 Revised Paragraph 3.4.1, 3.4.2, 3.5 Deleted 3.5.4; Inserted 3.6.3, 3.6.4, 3.8, 4.2, 4.3, 4.3.1 & 4.3.2 T. Swain2002 08 19 Revised Updated and renumbered 1992 10 01 Released EP000E10176308000 K. Wolters Printed copies are uncontrolle

2、d Copyright 2006, Ford Global Technologies, LLC Page 1 of 3 ADDITIVE, ANTI FREEZE, WINDSHIELD WASHER, INITIAL FILL WSK-M8B18-A 1. SCOPE The material defined by this specification is a mixture from ethanol, organic solvents, surfactants, dyestuff and water. The formulation is designed to meet German

3、tax requirements for denatured ethanol. 2. APPLICATION This specification was released originally for material used as winter additive for windshield washer system. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys S

4、tandard Requirements For Production Materials (WSS-M99P1111-A). 3.2 COMPOSITION Ethanol 75% Remaining additives and water 25% 3.3 MIXING RATIO 1:2 The antifreeze additive will provide -20 C freezing resistance when used in a mixing ratio of 1:2 with water. 3.4 MATERIAL PROPERTIES 3.4.1 Density at 20

5、 C 0.855 - 0.870 g/mL (Any agreed method) 3.4.2 Color (Visual) Standard color Clear, light blue Optional color As required by plant ENGINEERING MATERIAL SPECIFICATIONWSK-M8B18-A Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 2 of 3 3.4.3 Freezing Point, max -20 C

6、(Initial Approval only) (ASTM D 1177, mixing ratio 1:2) Test with de-mineralized water. 3.4.4 Shelf Stability 1 year No change of properties and no color change after a storage time of one year in the closed original container. 3.5 EFFECT ON PAINTED SURFACES (Initial Approval only) Painted surfaces

7、shall be tested as required in the relevant paint performance specification. Use the fluid under test instead of the specified test liquid. Use at the concentration stated in paragraph 3.3. 3.5.1 Plastic Bumpers: High flexible paint system for plastic bumpers shall meet the requirements of the appro

8、priate paragraph of WSS-M2P181-A/B and as required on the Engineering Drawing. 3.5.2 Radiator grills: Paint systems for radiator grills, mirrors etc. shall meet the requirements of the appropriate paragraph of WSS-M2P181-A/B and as required on the Engineering Drawing. 3.5.3 Vehicle body and paint re

9、pair systems: Vehicle body and paint repair systems shall meet the requirements of the appropriate paragraph of WSK-M2P180-A/B and as required on the Engineering Drawing. 3.6 EFFECT ON PLASTIC SUBSTRATES (Initial Approval only) Plastic surfaces shall be tested as required in the relevant plastic par

10、t performance specification. Use the fluid under test instead of the specified test liquid. Use at the concentration stated in paragraph 3.3. 3.6.1 Bumpers: Plastic bumpers shall meet the requirements of the appropriate paragraph of performance specification WSK-M98P7-A and as required on the Engine

11、ering Drawing. 3.6.2 Exterior Parts: Exterior plastic parts shall meet the requirements of the appropriate paragraph of performance specification WSK-M98P6-A and as required on the Engineering Drawing. 3.6.3 Non-Decorative Parts: Non-Decorative plastic parts shall meet the requirements of the approp

12、riate paragraph of performance specification WSK-M98P9-A and as required on the Engineering Drawing. 3.6.4 Exterior Lamp Assemblies: Exterior Lamp Assemblies shall meet the requirements of the appropriate paragraph of performance specification WSK-M98P10-A and as required on the Engineering Drawing.

13、 ENGINEERING MATERIAL SPECIFICATIONWSK-M8B18-A Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 3 of 3 3.7 COMPATIBILITY The additive must be compatible with windshield washer concentrate per WSB-M8B16-A. It shall not deteriorate the efficiency of the windshield wip

14、er. The additives shall not flocculate when used with town water. 3.8 FUNCTIONAL TRIAL The material must pass any current engineering requirements. Current requirements may be obtained from Body Exterior Engineering. Materials being evaluated for initial approval may be subjected to a functional tri

15、al. Body Engineering shall evaluate functional trial results. 4. GENERAL INFORMATION The information given below is provided for assistance and clarification in meeting the requirements of this specification. 4.1 MATERIAL REFERENCE All related materials used for approval of fluids to this specificat

16、ion, e.g. paint materials or plastic substrates, including test parameters, must be noted in the Initial Sample Report for the fluid. 4.2 PLANT DILUTION WATER It is recommended that town water be used by Plant for any dilution of this material. If a minimum water specification is required, then ESE-M99P25-A may be used. 4.3 CONTAINER MARKINGS AND DELIVERY ADVICE 4.3.1 Delivery advice notes Delivery advice notice must state concentrate, or dilution ratio if pre-diluted. 4.3.2 Non-bulk containers Non-bulk deliveries must indicate on the container concentrate, or dilution ratio if pre-diluted.