FORD SK-M98J9552-B-2005 MEDIUM SOLID BAKING ENAMEL EXTERIOR QUALITY READY TO SPRAY TO BE USED WITH FORD WSS-M99P1111-A 《即喷施式车外级中等含固量烘干式瓷漆 与标准FORD WSS-M99P1111-A一起使用 》.pdf

《FORD SK-M98J9552-B-2005 MEDIUM SOLID BAKING ENAMEL EXTERIOR QUALITY READY TO SPRAY TO BE USED WITH FORD WSS-M99P1111-A 《即喷施式车外级中等含固量烘干式瓷漆 与标准FORD WSS-M99P1111-A一起使用 》.pdf》由会员分享，可在线阅读，更多相关《FORD SK-M98J9552-B-2005 MEDIUM SOLID BAKING ENAMEL EXTERIOR QUALITY READY TO SPRAY TO BE USED WITH FORD WSS-M99P1111-A 《即喷施式车外级中等含固量烘干式瓷漆 与标准FORD WSS-M99P1111-A一起使用 》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2005 09 12 Revised Inserted 3.0; Deleted 3.4 and 4, Revised 3.3 1994 12 20 Revised and Retyped was 3 pages 1984 12 20 Released SM/EQ 5512 TP Printed copies are uncontrolled Copyright 2005, Ford Global Technologies, LLC Page 1 of 1 MEDIUM SOLID

2、 BAKING ENAMEL, EXTERIOR QUALITY, SK-M98J9552-B READY TO SPRAY 1. SCOPE The material defined by this specification is a thermosetting gloss baking medium solid enamel suitable for exterior exposure. 2. APPLICATION The material is generally used as final color coat on automotive bodies, to be sprayed

3、 in special colors according to Special Vehicle Order. 3. REQUIREMENTS Basic specification is SK-M98J9552-A with the following deviations 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materia

4、ls (WSS-M99P1111-A). 3.2.2 Package Viscosity 38 - 40 s FC-3/25 C 3.2.3 Weathering Resistance Florida exposure has to be performed according to SK-M98J9552-A although application of a new paint material is permitted prior to finalization of exposure. 3.3 SUBSTANCE CONTROL Legal, health, safety and environmental constraints may apply to the materials which are submitted for approval to this specification. Refer to Engineering Material Specification WSS-M99P9999-A1.