FORD M2C7-A-2009 SPECIAL WAY LUBRICANT《特级导轨润滑油》.pdf

《FORD M2C7-A-2009 SPECIAL WAY LUBRICANT《特级导轨润滑油》.pdf》由会员分享，可在线阅读，更多相关《FORD M2C7-A-2009 SPECIAL WAY LUBRICANT《特级导轨润滑油》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 NON-PRODUCTION MATERIAL SPECIFICATION Material Name Specification Number Date Action Changes 2009 04 09 N-STATUS No Replacement Named L. Sinclair, NA 1991 12 01 Page 1 of 1 SPECIAL WAY LUBRICANT M2C7-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE: The material desired under this standard is a refined inh

2、ibited mineral oil adhesive type way lubricant. 2. APPLICATION: This material was originally released for lubricating cold heading and other machinery where adhesiveness is necessary to reduce lubricant consumption. 3. REQUIREMENTS: 3.1 SPECIFIC GRAVITY: (ASTM D 287) 0.886 - 0.910 3.2 VISCOSITY: (AS

3、TM D 2422) cSt at 40 C 135-150 cSt at 100 C 13.0-15.0 3.3 FLASH POINT: (ASTM D 92) 193 C min 3.4 FIRE POINT: (ASTM D 92) 224 C min 3.5 POUR POINT: (ASTM D 97) -22 C max 3.6 ADHESIVENESS: The material shall be tacky and have adhesive properties which will reduce lubricant consumption and prevent metal scoring, as verified by shop trial. 4. STANDARD PARAGRAPHS: The following standard paragraphs as defined in Manufacturing Standard MCX, are herewith made a part of this standard: A8, C1, P1, P2, P3, R1, R2.