FORD M2C10-A-2009 OIL LUBRICATING - ENGINE - HEAVY DUTY《重型引擎用润滑油》.pdf

《FORD M2C10-A-2009 OIL LUBRICATING - ENGINE - HEAVY DUTY《重型引擎用润滑油》.pdf》由会员分享，可在线阅读，更多相关《FORD M2C10-A-2009 OIL LUBRICATING - ENGINE - HEAVY DUTY《重型引擎用润滑油》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 NON-PRODUCTION MATERIAL SPECIFICATION Material Name Specification Number Date Action Changes 2009 04 09 N-STATUS No Replacement Named L. Sinclair, FNA 1991 12 Page 1 of 1 OIL, LUBRICATING - ENGINE - HEAVY DUTY M-2C10-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE: The material defined by this standard is

2、 a petroleum lubricating compound. 2. APPLICATION: This material is generally used to lubricate wire rope. 3. REQUIREMENTS: 3.1 VISCOSITY: (ASTM D 445 and D 446) 3.1.1 cSt at 38.8 C 33 - 35.8 (155-165 SUS) 3.1.2 cSt at 98.9 C 4.17 - 4.82 (40-45 SUS) 3.2 FLASH POINT: (ASTM D 92) 168.3 C min 3.3 FIRE

3、POINT: (ASTM D 92) 193.3 C min 3.4 FATTY MATERIAL: (FLTM AJ 106-1) 4.5% min 3.5 SULPHUR: (ASTM D 129) 0.4% max 3.6 LEAD OXIDE: (ASTM D 811) 1.8% min 3.7 POUR POINT: Minus 37.2 C max (ASTM D 97) 3.8 COPPER CORROSION: Classification 2E, max (ASTM D 1275) 3 hours at 98.9 C 4. STANDARD PARAGRAPHS: The following standard paragraphs as defined in Manufacturing Standard MCX, are herewith made a part of this standard: A8, C1, P1, P2, P3, R1, R2.