FORD ESE-M1C104-A-2003 GREASE NLGI NO 2 - HIGH TEMPERATURE TO BE USED WITH FORD WSS-M99P1111-A 《油脂 美国润滑脂协会(NLGI)2号 高温(和FORD WSS-M99P1111-A一起使用)》.pdf

《FORD ESE-M1C104-A-2003 GREASE NLGI NO 2 - HIGH TEMPERATURE TO BE USED WITH FORD WSS-M99P1111-A 《油脂 美国润滑脂协会(NLGI)2号 高温(和FORD WSS-M99P1111-A一起使用)》.pdf》由会员分享，可在线阅读，更多相关《FORD ESE-M1C104-A-2003 GREASE NLGI NO 2 - HIGH TEMPERATURE TO BE USED WITH FORD WSS-M99P1111-A 《油脂 美国润滑脂协会(NLGI)2号 高温(和FORD WSS-M99P1111-A一起使用)》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2003 10 24 Revised Para 3.0 inserted; paras 3.7 and 4 deleted 1978 07 19 Metricated & Retyped CE3H-RD782440-ES 1963 09 03 Released E7-2781 Printed copies are uncontrolled Copyright 2003, Ford Global Technologies, Inc. Page 1 of 1 GREASE, NLGI

2、NO. 2 - HIGH TEMPERATURE ESE-M1C104-A 1. SCOPE The material defined by this specification is a NLGI No. 2 lithium soap grease having a high melting point with strong resistance to water. 2. APPLICATION This specification was released originally for grease used for industrial engines to provide initi

3、al lubrication to valve tip and top end of push rods, or as specified. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.1 WORKED PENETRATION, (mm/10

4、) 265 - 305 (ASTM D 217) 3.2 DROPPING POINT, min 183 C (ASTM D 566) 3.3 SOAP CONTENT - LITHIUM, min 8.0% (ASTM D 128) 3.4 MOISTURE CONTENT, max 0.5% (ASTM D 128) 3.5 OXIDATION STABILITY, Pressure Drop max 10 psi (68 kPa) (ASTM D 942, 100 hrs.) 3.6 VISCOSITY OF BASE OIL AT 37.8 C 102.4-172.6 cSt (ASTM D 128 & D 88) (mm2/s)