FORD ESB-M3G111-A-2012 TAPE POLYVINYL CHLORIDE FOAM - DOUBLE COATED PRESSURE SENSITIVE TO BE USED WITH FORD WSS-M99P1111-A .pdf
《FORD ESB-M3G111-A-2012 TAPE POLYVINYL CHLORIDE FOAM - DOUBLE COATED PRESSURE SENSITIVE TO BE USED WITH FORD WSS-M99P1111-A .pdf》由会员分享,可在线阅读,更多相关《FORD ESB-M3G111-A-2012 TAPE POLYVINYL CHLORIDE FOAM - DOUBLE COATED PRESSURE SENSITIVE TO BE USED WITH FORD WSS-M99P1111-A .pdf(3页珍藏版)》请在麦多课文档分享上搜索。
1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 03 2012 04 24 N Status No usage or replacement N. Benipal, NA 2005 11 28 Revised Inserted 3.0; Deleted 3.1, 3.13, 4 1973 09 21 Released AC1-6000-377 Controlled document at www.MATS Copyright 2012, Ford Global Technologies, LLC Page 1 of 3
2、 TAPE, POLYVINYL CHLORIDE FOAM - DOUBLE COATED ESB-M3G111-A PRESSURE SENSITIVE NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a cellular polyvinyl chloride foam tape coated on both sides with a pressure sensitive adhesive and protected by release paper. 2. APPLI
3、CATION This specification was released originally for material used as a filler between dense rubber weatherstrip and enameled steel to seal against dust and air leaks. The pressure sensitive adhesive provides a temporary bond prior to the addition of mechanical retainers. 3. REQUIREMENTS 3.0 STANDA
4、RD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 COLOR Black, or as specified on engineering drawing 3.3 DENSITY 12.0 - 14.0 lb/ft3 (ASTM D 1667) (190 - 220 kg/m3) 3.4 TENS
5、ILE STRENGTH, min 5 lb/in (880 N/m) width (Approx. 0.060 in (1.52 mm) thick) Elongation, min 150% Test Method: 10 in (250 mm) strips of tape as received, with release paper removed, shall be pulled in the lengthwise direction using cross head equipment. The initial jaw separation shall be 4 in (100
6、mm) and the operating speed shall be 12 in (305 mm)/min. Elongation may be calculated by chart speed determination or by use of calipers. 3.5 LOW TEMPERATURE FLEXIBILITY No cracking Test Method: Condition 6 in (150 mm) samples of tape as received at -29 +/- 1 C for 4 h and bend the samples 180 aroun
7、d a temperature conditioned 1/4 in (6.4 mm) diameter mandrel. 3.6 HARDNESS - DUROMETER “00“ 30 +/- 5 (ASTM D 2240, ply adhesive to adhesive for 1/2 in (13 mm) min thickness and use instantaneous readings) ENGINEERING MATERIAL SPECIFICATION ESB-M3G111-A Copyright 2012, Ford Global Technologies, LLC P
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- FORDESBM3G111A2012TAPEPOLYVINYLCHLORIDEFOAMDOUBLECOATEDPRESSURESENSITIVETOBEUSEDWITHFORDWSSM99P1111APDF

链接地址:http://www.mydoc123.com/p-745413.html