FORD ESB-M1B9-A-2002 SOAP LIQUID TO BE USED WITH FORD WSS-M99P1111-A 《液体肥皂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

《FORD ESB-M1B9-A-2002 SOAP LIQUID TO BE USED WITH FORD WSS-M99P1111-A 《液体肥皂 与标准FORD WSS-M99P1111-A一起使用 》.pdf》由会员分享，可在线阅读，更多相关《FORD ESB-M1B9-A-2002 SOAP LIQUID TO BE USED WITH FORD WSS-M99P1111-A 《液体肥皂 与标准FORD WSS-M99P1111-A一起使用 》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2002 07 19 Revised Updated and renumbered 1978 04 25 Metricated and Retyped CAH1-RD572066-13 1963 06 05 Released AS1 #915 Printed copies are uncontrolled Page 1 of 1 Copyright 2002, Ford Global Technologies,

2、 Inc. SOAP, LIQUID ESB-M1B9-A 1. SCOPE The material defined by this specification is a clear solution of straight vegetable oil and potash soap. 2. APPLICATION This specification was released originally for material used as a washroom hand soap, and as a general cleaning soap for interior automotive

3、 trim, upholstery, etc. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 COMPOSITION Anhydrous Soap, min 20.0% Chlorides as Potassium Chloride, ma

4、x 0.3% Free Potassium Hydroxide 0.00 Potassium Carbonate, max 0.1% Alcohol Insolubles, max 0.5% Perfume Trace 3.3 CONTAMINANTS This material shall contain no animal oil, sugar or fillers. 3.4 LATHER This material shall lather freely in hard, cold water. 3.5 QUALITY This material shall have no injurious effect on the skin, and shall leave no objectionable odor after using.