FORD B-1-2010 DRAWING CLASSIFICATION (Version 28).pdf

《FORD B-1-2010 DRAWING CLASSIFICATION (Version 28).pdf》由会员分享，可在线阅读，更多相关《FORD B-1-2010 DRAWING CLASSIFICATION (Version 28).pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、 Original Issue: 19960419 Copyright, Ford Motor Company. Latest Re-issue: 20101231Ford Proprietary and/or Confidential Information - Do not distribute to others w/o prior written authorization. FECDS B-1 Engineering CAD first consult WERS usage. Approval to use standard and utility fasteners must be

2、 obtained from the Fastener Engineer. Refer to FAP03117. For Utility Fastener Drawing Requirements, see Standard F-7. 2.1.17 Illustration Drawings 2.1.17.1 Illustration Drawings depict how to install components, assemblies, and complete systems into the vehicle. These necessary instructions convey t

3、echnical information such as welding, sealing, torque requirements, and installation procedures. For additional information regarding illustration types, see Standard F1. ENGINEERING CAD e.g. the Excel File used to generate a Typewriter Drawing, the CATDrawing file used to create the Product Drawing

4、, the AutoCad file used to create the Manufacturing Tool Drawing, etc. NOTE: Portable Document Files (PDF) are not Modifiable Files 3 REQUIREMENTS 3.1 Global Information Standards All Drawings, regardless of Classification, that are approved and released by their respective activities are considered

5、 ISO Documents of Record. They shall be managed in accordance with the Global Information Standards (GIS) requirements supporting traceability and history. 3.1.1 Modifiable File All Documents of Record shall have their respective Modifiable File stored in an appropriate corporate repository, such as TCe, for future retrieval and revision. 3.2 Required Language All Drawings, regardless of Classification, shall be created in English. 4 SPECIFICATIONS (Reserved) 5 ADDENDUM (Reserved)