ETSI TS 125 104-2017 Universal Mobile Telecommunications System (UMTS) Base Station (BS) radio transmission and reception (FDD) (V14 2 0 3GPP TS 25 104 version 14 2 0 Release 14)《通.pdf

《ETSI TS 125 104-2017 Universal Mobile Telecommunications System (UMTS) Base Station (BS) radio transmission and reception (FDD) (V14 2 0 3GPP TS 25 104 version 14 2 0 Release 14)《通.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 125 104-2017 Universal Mobile Telecommunications System (UMTS) Base Station (BS) radio transmission and reception (FDD) (V14 2 0 3GPP TS 25 104 version 14 2 0 Release 14)《通.pdf（129页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 125 104 V13.4.0 (2017-04) Universal Mobile Telecommunications System (UMTS); Base Station (BS) radio transmission and reception (FDD) (3GPP TS 25.104 version 13.4.0 Release 13) TECHNICAL SPECIFICATION ETSI ETSI TS 125 104 V13.4.0 (2017-04)13GPP TS 25.104 version 13.4.0 Release 13Reference R

2、TS/TSGR-0425104vd40 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present d

3、ocument can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In

4、 case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the do

5、cument may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:

6、/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be m

7、odified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benef

8、it of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 125 104

9、V13.4.0 (2017-04)23GPP TS 25.104 version 13.4.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, a

10、nd can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to th

11、e ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. For

12、eword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the co

13、rresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “c

14、annot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 104 V13.4.0 (2017-04)33GPP TS 25.104 version 13.4.0 Rel

15、ease 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 7g31 Scope 8g32 References 8g33 Definitions and abbreviations . 8g33.1 Definitions . 8g33.2 Abbreviations 11g33.3 Symbols . 11g34 General . 12g34.1 Relationship between Minimum Requirements and Test R

16、equirements . 12g34.2 Base station classes . 12g34.3 Regional requirements . 13g34.4 Environmental requirements for the BS equipment 15g34.5 Applicability of requirements 15g34.6 Requirements for contiguous and non-contiguous spectrum . 15g34.7 Requirements for BS capable of multi-band operation . 1

17、6g35 Frequency bands and channel arrangement 16g35.1 General 16g35.2 Frequency bands 17g35.3 Tx-Rx frequency separation 19g35.4 Channel arrangement . 20g35.4.1 Channel spacing . 20g35.4.2 Channel raster 20g35.4.3 Channel number. 20g36 Transmitter characteristics . 22g36.1 General 22g36.2 Base statio

18、n output power . 23g36.2.1 Base station maximum output power . 23g36.2.1.1 Minimum requirement . 23g36.3 Frequency error . 24g36.3.1 Minimum requirement . 24g36.4 Output power dynamics . 24g36.4.1 Inner loop power control in the downlink 24g36.4.1.1 Power control steps 24g36.4.1.1.1 Minimum requirem

19、ent 24g36.4.2 Power control dynamic range 25g36.4.2.1 Minimum requirements 25g36.4.3 Total power dynamic range . 25g36.4.3.1 Minimum requirement . 25g36.4.4 Primary CPICH power . 25g36.4.4.1 Minimum requirement . 25g36.4.4A Secondary CPICH power . 25g36.4.4A.1 Minimum Requirement for MIMO mode 26g36

20、.4.4A.2 Minimum Requirement for MIMO mode with four transmit antennas . 26g36.4.4B Demodulation CPICH power for MIMO mode with four transmit antennas . 26g36.4.4B.1 Minimum Requirement 26g36.4.5 IPDL time mask. 26g36.4.5.1 Minimum Requirement 26g36.4.6 Home base station output power for adjacent cha

21、nnel protection 27g36.4.6.1 Minimum requirement . 28g3ETSI ETSI TS 125 104 V13.4.0 (2017-04)43GPP TS 25.104 version 13.4.0 Release 136.5 (void) . 28g36.6 Output RF spectrum emissions 28g36.6.1 Occupied bandwidth 28g36.6.1.1 Minimum requirement . 28g36.6.2 Out of band emission . 28g36.6.2.1 Spectrum

22、emission mask 28g36.6.2.2 Adjacent Channel Leakage power Ratio (ACLR) 34g36.6.2.2.1 Minimum requirement 35g36.6.2.2.2 Cumulative ACLR requirement in non-contiguous spectrum 35g36.6.3 Spurious emissions 36g36.6.3.1 Mandatory Requirements . 37g36.6.3.1.1 Spurious emissions (Category A) . 37g36.6.3.1.2

23、 Spurious emissions (Category B) . 37g36.6.3.2 Protection of the BS receiver of own or different BS 39g36.6.3.2.1 Minimum Requirement 39g36.6.3.3 Co-existence with other systems in the same geographical area 41g36.6.3.3.1 Minimum Requirements . 41g36.6.3.4 Co-existence with co-located and co-sited b

24、ase stations 46g36.6.3.4.1 Minimum Requirements . 46g36.6.3.5 Co-existence with PHS 55g36.6.3.5.1 Minimum Requirement 55g36.6.3.6 Co-existence with services in adjacent frequency bands 55g36.6.3.6.1 Minimum requirement 55g36.6.3.7 Void 56g36.6.3.7.1 Void 56g36.6.3.7.2 Void 56g36.6.3.8 Protection of

25、Public Safety Operations 56g36.6.3.8.1 Minimum Requirement 56g36.6.3.9 Co-existence with Home BS operating in other bands . 56g36.6.3.9.1 Minimum Requirements . 57g36.7 Transmitter intermodulation 59g36.7.1 Minimum requirement . 59g36.8 Transmit modulation . 59g36.8.1 Transmit pulse shape filter . 6

26、0g36.8.2 Error Vector Magnitude . 60g36.8.2.1 Minimum requirement . 60g36.8.3 Peak code Domain error 60g36.8.3.1 Minimum requirement . 60g36.8.4 Time alignment error . 60g36.8.4.1 Minimum Requirements . 61g36.8.5 Relative Code Domain Error for 64QAM modulation 61g36.8.5.1 Minimum requirement . 61g37

27、 Receiver characteristics 61g37.1 General 61g37.2 Reference sensitivity level . 62g37.2.1 Minimum requirement . 62g37.2.2 Maximum Frequency Deviation for Receiver Performance 62g37.3 Dynamic range 62g37.3.1 Minimum requirement . 62g37.4 Adjacent Channel Selectivity (ACS) . 62g37.4.1 Minimum requirem

28、ent . 63g37.4.2 Minimum requirement - Co-location with UTRA-TDD 63g37.5 Blocking characteristics 63g37.5.1 Minimum requirement . 63g37.5.2 Minimum Requirement - Co-location with GSM, DCS, PCS, CDMA, UTRA and/or E-UTRA, UTRA TDD and/or E-UTRA TDD . 75g37.5.3 Void . 84g37.6 Intermodulation characteris

29、tics . 84g37.6.1 Minimum requirement . 84g37.7 Spurious emissions 86g37.7.1 Minimum requirement . 86g3ETSI ETSI TS 125 104 V13.4.0 (2017-04)53GPP TS 25.104 version 13.4.0 Release 138 Performance requirement . 87g38.1 General 87g38.2 Demodulation in static propagation conditions . 88g38.2.1 Demodulat

30、ion of DCH . 88g38.2.1.1 Minimum requirement . 88g38.3 Demodulation of DCH in multipath fading conditions . 89g38.3.1 Multipath fading Case 1 . 89g38.3.1.1 Minimum requirement . 89g38.3.2 Multipath fading Case 2 . 89g38.3.2.1 Minimum requirement . 89g38.3.3 Multipath fading Case 3 . 90g38.3.3.1 Mini

31、mum requirement . 90g38.3.4 Multipath fading Case 4 . 90g38.3.4.1 Minimum requirement . 91g38.4 Demodulation of DCH in moving propagation conditions 91g38.4.1 Minimum requirement . 91g38.5 Demodulation of DCH in birth/death propagation conditions . 91g38.5.1 Minimum requirement . 92g38.5A Demodulati

32、on of DCH in high speed train conditions 92g38.5A.1 General . 92g38.5A.2 Minimum requirement . 92g38.6 (void) . 92g38.7 Performance requirement for RACH . 92g38.7.1 Performance requirement for RACH preamble detection 92g38.7.2 Demodulation of RACH message 93g38.7.2.1 Minimum requirements for Static

33、Propagation Condition . 93g38.7.2.2 Minimum requirements for Multipath Fading Case 3 94g38.7.2.3 Minimum requirements for high speed train conditions 94g38.8 (void) . 94g38.9 (void) . 94g38.10 Performance of ACK/NACK detection for HS-DPCCH . 94g38.10.1 ACK false alarm 95g38.10.2 ACK mis-detection 95

34、g38.10A Performance of ACK/NACK detection for 4C-HSDPA HS-DPCCH . 95g38.10A.1 Performance requirements . 95g38.10A.1.1 ACK false alarm . 95g38.10A.1.2 ACK mis-detection. 96g38.10A.2 Applicability of requirements 96g38.10B Performance of ACK/NACK detection for 8C-HSDPA HS-DPCCH . 97g38.11 Demodulatio

35、n of E-DPDCH in multipath fading condition 97g38.11A Demodulation of E-DPDCH and S-E-DPDCH in multipath fading condition for UL MIMO 98g38.12 Performance of signaling detection for E-DPCCH in multipath fading condition 99g3Annex A (normative): Measurement channels 100g3A.1 Summary of UL reference me

36、asurement channels . 100g3A.2 UL reference measurement channel for 12.2 kbps . 101g3A.3 UL reference measurement channel for 64 kbps 102g3A.4 UL reference measurement channel for 144 kbps 103g3A.5 UL reference measurement channel for 384 kbps 104g3A.6 (void) 104g3A.7 Reference measurement channels f

37、or UL RACH 105g3A.8 Reference measurement channel for HS-DPCCH 105g3A.8A Reference measurement channel for HS-DPCCH for 4C-HSDPA 106g3A.9 Summary of E-DPDCH Fixed reference channels . 107g3A.10 E-DPDCH Fixed reference channel 1 (FRC1) . 107g3ETSI ETSI TS 125 104 V13.4.0 (2017-04)63GPP TS 25.104 vers

38、ion 13.4.0 Release 13A.11 E-DPDCH Fixed reference channel 2 (FRC2) . 108g3A.12 E-DPDCH Fixed reference channel 3 (FRC3) . 109g3A.13 E-DPDCH Fixed reference channel 4 (FRC4) . 110g3A.14 E-DPDCH Fixed reference channel 5 (FRC5) . 111g3A.15 E-DPDCH Fixed reference channel 6 (FRC6) . 112g3A.16 E-DPDCH F

39、ixed reference channel 7 (FRC7) . 112g3A.17 E-DPDCH Fixed reference channel 8 (FRC8) . 113g3A.18 E-DPDCH Fixed reference channel 9 (FRC9) . 114g3A.19 E-DPDCH Fixed reference channel 10 (FRC10) . 115g3Annex B (normative): Propagation conditions 117g3B.1 Static propagation condition . 117g3B.2 Multi-p

40、ath fading propagation conditions 117g3B.3 Moving propagation conditions 117g3B.4 Birth-Death propagation conditions . 118g3B.4A High speed train conditions 119g3B.5 Multipath fading propagation conditions for E-DPDCH and E-DPCCH . 121g3Annex C (normative): Characteristics of the W-CDMA interference

41、 signal 122g3Annex D (normative): Regional requirement for protection of DTT 123g3Annex E (informative): Change History 124g3History 128g3ETSI ETSI TS 125 104 V13.4.0 (2017-04)73GPP TS 25.104 version 13.4.0 Release 13Foreword This Technical Specification has been produced by the 3GPP. The contents o

42、f the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of this TS, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version 3.y.z w

43、here: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 Indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is increment

44、ed when editorial only changes have been incorporated in the specification. ETSI ETSI TS 125 104 V13.4.0 (2017-04)83GPP TS 25.104 version 13.4.0 Release 131 Scope This document establishes the Base Station minimum RF characteristics of the FDD mode of UTRA. 2 References The following documents conta

45、in provisions which, through reference in this text, constitute provisions of the present document. uni25CF References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. uni25CF For a specific reference, subsequent revisions do not apply. u

46、ni25CF For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 ITU-R Recommendation SM.329, “ U

47、nwanted emissions in the spurious domain “. 2 (void) 3 ETSI ETR 273-1-2: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties; Part 1: Uncertainties in the meas

48、urement of mobile radio equipment characteristics; Sub-part 2: Examples and annexes“. 4 3GPP TR 25.942 “RF System Scenarios“. 5 3GPP TS 45.004: “Digital cellular telecommunications system (Phase 2+); Modulation“. 6 3GPP TS 25.213: “Spreading and modulation (FDD)“. 7 ITU-R recommendation SM.328: “Spe

49、ctra and bandwidth of emissions“. 8 3GPP TS 36.104: “ Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio transmission and reception“. 9 ECC/DEC/(09)03 “ Harmonised conditions for MFCN in the band 790-862 MHz“, 30 Oct. 2009 10 3GPP TS 37.104: “ E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) radio transmission and reception“. 11 3GPP TS 25.331: “ Radio Resource Control. Protocol Specification“. 12 3GPP TS 25.214: “Physical layer procedures (FDD) “. 13 CEPT ECC Decision (13)03, “The harmonised use of th