ETSI TS 123 094-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Follow-Me (FM) Stage 2 (V15 0 1 3GPP TS 23 094 ve.pdf

《ETSI TS 123 094-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Follow-Me (FM) Stage 2 (V15 0 1 3GPP TS 23 094 ve.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 123 094-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Follow-Me (FM) Stage 2 (V15 0 1 3GPP TS 23 094 ve.pdf（35页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 123 094 V15.0.1 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Follow-Me (FM); Stage 2 (3GPP TS 23.094 version 15.0.1 Release 15) TECHNICAL SPECIFICATION GLOBAL SYSTEM FOR MOBILE COMMUNICATIONSRETSI ETSI TS 123 094 V

2、15.0.1 (2018-07)13GPP TS 23.094 version 15.0.1 Release 15Reference RTS/TSGC-0423094vf01 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre l

3、a Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document s

4、hall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETS

5、I Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present doc

6、ument, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by w

7、ritten permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of E

8、TSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Associa

9、tion. ETSI ETSI TS 123 094 V15.0.1 (2018-07)23GPP TS 23.094 version 15.0.1 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicl

10、y available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI We

11、b server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may

12、 become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use o

13、r reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Part

14、nership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI i

15、dentities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (V

16、erbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 123 094 V15.0.1 (2018-07)33GPP TS 23.094 version 15.0.1 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology

17、 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 6g34 Handling of Follow Me 6g34.1 General . 6g34.1.1 Provision . 7g34.1.2 Registration . 7g34.1.3 Erasure 7g34.1.4 Interrogation . 7g34.2 Information Flows 7g34.2.1 Information Fl

18、ow for the handling of FM by the initiating subscriber . 7g34.2.2 Information Flow for the handling of FM by the remote party . 10g34.3 Handling of FM control in HLRa and FFNb 10g34.3.1 Handling of FM control in HLRa . 10g34.3.2 Handling of FM control in FFNb 13g34.4 USSD interworking and Cross-phas

19、e compatibility . 22g35 Information stored in the network entities 22g35.1 Information stored in HLRa and FFNb 22g35.2 State transition model . 23g35.3 Information stored in the VLR . 24g35.4 Transfer of information from HLR to VLR 24g3Annex A (informative): Checking matrix for FM-CFU interaction in

20、 FFNb . 25g3Annex B (normative): FM control Messages and their contents . 27g3B.1 General principles 27g3B.2 Information Elements used in the messages . 27g3B.3 Messages Contents of the FM Request 27g3B.4 Messages Contents of the HLR-FM-Request . 28g3B.5 Contents and Format of the USSD String of the

21、 USSD-Notify . 31g3B.6 Inter-process Message Init-Notify 32g3Annex C (informative): Change history . 33g3History 34g3ETSI ETSI TS 123 094 V15.0.1 (2018-07)43GPP TS 23.094 version 15.0.1 Release 15Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3

22、GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version n

23、umber as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,

24、updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 123 094 V15.0.1 (2018-07)53GPP TS 23.094 version 15.0.1 Release 151 Scope The present document specifies the stage 2 description for the Follow Me feature. The Follow Me fe

25、ature enables a mobile subscriber A to manipulate the Follow Me data of a remote party B in such a way that subsequent calls directed to remote party B will be forwarded to subscriber A. 2 References The following documents contain provisions which, through reference in this text, constitute provisi

26、ons of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a referen

27、ce to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “3G Vocabulary“. 2 3GPP TS 22.004: “General on Supplementary Services“. 3 3GPP TS 22.030: “Man-Machine In

28、terface (MMI) of the Mobile Station (MS)“. 4 3GPP TS 22.082: “Call Forwarding (CF) supplementary services - Stage 1“. 5 3GPP TS 22.094: “Follow Me (FM) feature - Stage 1“. 6 3GPP TS 23.011: “Technical realisation of Supplementary Services - General Aspects“. 7 3GPP TS 23.015: “Technical realisation

29、of Operator Determined Barring (ODB)“. 8 3GPP TS 23.090: “Unstructured Supplementary Services Data (USSD)- Stage 2“. 9 3GPP TS 23.082: “Call Forwarding (CF) supplementary services - Stage 2“. 10 3GPP TS 22.090: “Unstructured Supplementary Services Data (USSD)- Stage 1“. 11 3GPP TS 24.090: “Unstructu

30、red Supplementary Services Data (USSD)- Stage 3“. 12 3GPP TS 29.002: “Mobile Application Part (MAP)“. 3 Definitions and abbreviations 3.1 Definitions initiating subscriber: mobile subscriber who modifies the Follow Me data of the remote party. initiating number: number (the MSISDN of the initiating

31、subscriber) to which incoming calls, originally destined for the remote party, shall be forwarded. It is subsequently also referred to as MSISDNA. remote party: is characterised by the remote number which is defined in the numbering plan of a PLMN operator. The Follow Me feature enables the initiati

32、ng subscriber to modify the Follow Me data of the remote party. In particular cases the remote party is a GSM subscriber of the PLMN and the remote number denotes her basic MSISDN. Previously registered subscriber: Is the initiating service subscriber who has registered Follow Me with respect to a r

33、emote party. Her Registration can be erased by herself or by an FM service supervisor via forced erasure procedure. ETSI ETSI TS 123 094 V15.0.1 (2018-07)63GPP TS 23.094 version 15.0.1 Release 15FM service supervisor: is an initiating subscriber who is allowed to modify the Follow Me data of a remot

34、e party who has been registered to a previously registered subscriber for the Follow Me application. The FM service supervisor shall be authorised by her network operator. remote number: is a number in E.164 format which identifies a remote party. In general this number is not assigned to a subscrib

35、er and can be regarded as a “dummy MSISDN“. In particular cases the remote party is a GSM subscriber of the PLMN and the remote number denotes her basic MSISDN. The remote number is entered by the initiating subscriber for registration, interrogation, forced erasure and erasure of the Follow Me feat

36、ure with respect to the remote party. Follow Me function node: is a network node in the PLMN operator of the remote party. The FM data of the remote party are stored in this node. This node can be implemented in: - an HLR; - any other operator specific network node e.g.: - a gsmSCF; - an SCP. 3.2 Ab

37、breviations FFN Follow Me function node FM Follow MeSCP Service Control Part Other abbreviations used in this ETS are listed in 3GPP TR 21.905. 4 Handling of Follow Me 4.1 General Follow Me enables an initiating mobile subscriber A to have control over the Follow Me data of a remote party B. The rem

38、ote party B is characterised by the remote number which is defined in the numbering plan of a PLMN operator. Initiating Subscriber A shall be able to manipulate the Follow Me data of remote party B such that subsequent calls destined for remote party B are forwarded to initiating subscriber A. In th

39、e case of Forced Erasure by an FM service supervisor, the initiating subscriber is allowed to erase the Follow Me data of a remote party who has been registered to a different initiating subscriber for the Follow Me application. Follow Me is a PLMN specific feature and the control operations of FM a

40、re based on USSD. All messages between the MS and the mobile network and internal to the mobile network are USSD messages. The present document deals with the control operations of FM in HLRa and FFN. If the FFN is an HLR, the control of the requests for both FM and CFU services is specified (see su

41、bclause 4.3.2). The functionality of forwarding calls for remote party B to initiating subscriber A (after successful registration of FM) is out of the scope of the present document. This functionality is the same as the functionality of the Call Forwarding Unconditional Supplementary Service applie

42、d to all telecommunication services of remote party B for which CFU is applicable. NOTE 1: the “served mobile subscriber“ in 3GPP TS 22.094 5 corresponds to the “remote party“ in the present document and the “forwarded-to subscriber“ in 3GPP TS 22.094 5 corresponds to the “initiating subscriber“ in

43、the present document. NOTE 2: The forwarding of calls for remote party B to initiating subscriber A can be achieved by invoking the Call Forwarding Unconditional Supplementary Service or by making use of an equivalent operator specific service (e.g. via CAMEL). The functionality of the control of Fo

44、llow Me (registration, erasure, forced erasure and interrogation) is split between the HLR of the initiating subscriber A (HLRa) and the FFN of the remote party B (FFNb). ETSI ETSI TS 123 094 V15.0.1 (2018-07)73GPP TS 23.094 version 15.0.1 Release 154.1.1 Provision FM can be registered / erased / in

45、terrogated by an initiating subscriber A with respect to a remote party B if both parties are provisioned with FM. To enable forced erasure by an FM service supervisor, the FM service shall be provisioned to the FM service supervisor. Additionally, she needs the subscription entitlement to perform t

46、he forced erasure. NOTE: In general remote party B does not correspond to a GSM subscriber. In this case provisioning of FM for remote party B is operator specific. If remote party B is a GSM subscriber and if the forwarding of calls for remote party B to initiating subscriber A is achieved by invok

47、ing the Call Forwarding Unconditional Supplementary Service, provision of CFU for remote party B is required. 4.1.2 Registration The initiating subscriber registers the FM feature with respect to a particular remote party. If an initiating subscriber A successfully registers FM with respect to a rem

48、ote party B then FM becomes registered, active and operative for remote party B. As a result of the registration subsequent calls directed to remote party B are forwarded to initiating subscriber A. NOTE: The remote party cannot register FM with respect to herself. 4.1.3 Erasure If an initiating sub

49、scriber A or the FM service supervisor successfully erases FM with respect to a remote party B then FM becomes not registered and not active for remote party B. For forced erasure by the FM service supervisor the previously registered subscriber shall be informed of the successful forced erasure via a network initiated USSD Notify message with appropriate contents. This message is sent by the FFN. If remote party B is a GSM subscriber and successfully erases FM then FM becomes not registered and not active for remote party B. 4.1.4 Interrogation If