ETSI TS 123 094-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) Follow-Me (FM) Stage 2 (V13 0 0 3GPP TS 23 094 version .pdf

《ETSI TS 123 094-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) Follow-Me (FM) Stage 2 (V13 0 0 3GPP TS 23 094 version .pdf》由会员分享，可在线阅读，更多相关《ETSI TS 123 094-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) Follow-Me (FM) Stage 2 (V13 0 0 3GPP TS 23 094 version .pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelF(3GPP TS 23.0TECHNICAL SPECIFICATION123 094 V13.0.0 (2016communications system (Phaelecommunications System (Follow-Me (FM); Stage 2 .094 version 13.0.0 Release 13GLOBAL SYSTEMOBILE COMMUN16-01) hase 2+); (UMTS); 13) TEM FOR ICATIONSRETSI ETSI TS

2、 123 094 V13.0.0 (2016-01)13GPP TS 23.094 version 13.0.0 Release 13Reference RTS/TSGC-0423094vd00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif en

3、registre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present

4、document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive

5、within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present doc

6、ument, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by w

7、ritten permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM,

8、UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI

9、ETSI TS 123 094 V13.0.0 (2016-01)23GPP TS 23.094 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members an

10、d non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/)

11、. Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the prese

12、nt document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being refe

13、rences to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will no

14、t“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 123 094 V13.0.0 (2016-01)33GPP TS 23.094 ve

15、rsion 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 6g34 Handling of Follow Me 6g34.1 General . 6g34.1.1 Provision . 7g34.1.2 Regi

16、stration . 7g34.1.3 Erasure 7g34.1.4 Interrogation . 7g34.2 Information Flows 7g34.2.1 Information Flow for the handling of FM by the initiating subscriber . 7g34.2.2 Information Flow for the handling of FM by the remote party . 10g34.3 Handling of FM control in HLRa and FFNb 10g34.3.1 Handling of F

17、M control in HLRa . 10g34.3.2 Handling of FM control in FFNb 13g34.4 USSD interworking and Cross-phase compatibility . 22g35 Information stored in the network entities 23g35.1 Information stored in HLRa and FFNb 23g35.2 State transition model . 23g35.3 Information stored in the VLR . 24g35.4 Transfe

18、r of information from HLR to VLR 24g3Annex A (informative): Checking matrix for FM-CFU interaction in FFNb . 25g3Annex B (normative): FM control Messages and their contents . 27g3B.1 General principles 27g3B.2 Information Elements used in the messages . 27g3B.3 Messages Contents of the FM Request 27

19、g3B.4 Messages Contents of the HLR-FM-Request . 28g3B.5 Contents and Format of the USSD String of the USSD-Notify . 30g3B.6 Inter-process Message Init-Notify 31g3Annex C (informative): Change history . 32g3History 33g3ETSI ETSI TS 123 094 V13.0.0 (2016-01)43GPP TS 23.094 version 13.0.0 Release 13For

20、eword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it w

21、ill be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the

22、 second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 123 094 V13.0.0 (2016-01)53GPP TS 23.094 version 13.0.0 Release 131 Sco

23、pe The present document specifies the stage 2 description for the Follow Me feature. The Follow Me feature enables a mobile subscriber A to manipulate the Follow Me data of a remote party B in such a way that subsequent calls directed to remote party B will be forwarded to subscriber A. 2 References

24、 The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions d

25、o not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “3G Vocabu

26、lary“. 2 3GPP TS 22.004: “General on Supplementary Services“. 3 3GPP TS 22.030: “Man-Machine Interface (MMI) of the Mobile Station (MS)“. 4 3GPP TS 22.082: “Call Forwarding (CF) supplementary services - Stage 1“. 5 3GPP TS 22.094: “Follow Me (FM) feature - Stage 1“. 6 3GPP TS 23.011: “Technical real

27、isation of Supplementary Services - General Aspects“. 7 3GPP TS 23.015: “Technical realisation of Operator Determined Barring (ODB)“. 8 3GPP TS 23.090: “Unstructured Supplementary Services Data (USSD)- Stage 2“. 9 3GPP TS 23.082: “Call Forwarding (CF) supplementary services - Stage 2“. 10 3GPP TS 22

28、.090: “Unstructured Supplementary Services Data (USSD)- Stage 1“. 11 3GPP TS 24.090: “Unstructured Supplementary Services Data (USSD)- Stage 3“. 12 3GPP TS 29.002: “Mobile Application Part (MAP)“. 3 Definitions and abbreviations 3.1 Definitions initiating subscriber: mobile subscriber who modifies t

29、he Follow Me data of the remote party. initiating number: number (the MSISDN of the initiating subscriber) to which incoming calls, originally destined for the remote party, shall be forwarded. It is subsequently also referred to as MSISDNA.remote party: is characterised by the remote number which i

30、s defined in the numbering plan of a PLMN operator. The Follow Me feature enables the initiating subscriber to modify the Follow Me data of the remote party. In particular cases the remote party is a GSM subscriber of the PLMN and the remote number denotes her basic MSISDN. Previously registered sub

31、scriber: Is the initiating service subscriber who has registered Follow Me with respect to a remote party. Her Registration can be erased by herself or by an FM service supervisor via forced erasure procedure. ETSI ETSI TS 123 094 V13.0.0 (2016-01)63GPP TS 23.094 version 13.0.0 Release 13FM service

32、supervisor: is an initiating subscriber who is allowed to modify the Follow Me data of a remote party who has been registered to a previously registered subscriber for the Follow Me application. The FM service supervisor shall be authorised by her network operator. remote number: is a number in E.16

33、4 format which identifies a remote party. In general this number is not assigned to a subscriber and can be regarded as a “dummy MSISDN“. In particular cases the remote party is a GSM subscriber of the PLMN and the remote number denotes her basic MSISDN. The remote number is entered by the initiatin

34、g subscriber for registration, interrogation, forced erasure and erasure of the Follow Me feature with respect to the remote party. Follow Me function node: is a network node in the PLMN operator of the remote party. The FM data of the remote party are stored in this node. This node can be implement

35、ed in: - an HLR; - any other operator specific network node e.g.: - a gsmSCF; - an SCP. 3.2 Abbreviations FFN Follow Me function node FM Follow MeSCP Service Control Part Other abbreviations used in this ETS are listed in 3GPP TR 21.905. 4 Handling of Follow Me 4.1 General Follow Me enables an initi

36、ating mobile subscriber A to have control over the Follow Me data of a remote party B. The remote party B is characterised by the remote number which is defined in the numbering plan of a PLMN operator. Initiating Subscriber A shall be able to manipulate the Follow Me data of remote party B such tha

37、t subsequent calls destined for remote party B are forwarded to initiating subscriber A. In the case of Forced Erasure by an FM service supervisor, the initiating subscriber is allowed to erase the Follow Me data of a remote party who has been registered to a different initiating subscriber for the

38、Follow Me application. Follow Me is a PLMN specific feature and the control operations of FM are based on USSD. All messages between the MS and the mobile network and internal to the mobile network are USSD messages. The present document deals with the control operations of FM in HLRa and FFN. If th

39、e FFN is an HLR, the control of the requests for both FM and CFU services is specified (see subclause 4.3.2). The functionality of forwarding calls for remote party B to initiating subscriber A (after successful registration of FM) is out of the scope of the present document. This functionality is t

40、he same as the functionality of the Call Forwarding Unconditional Supplementary Service applied to all telecommunication services of remote party B for which CFU is applicable. NOTE 1: the “served mobile subscriber“ in 3GPP TS 22.094 5 corresponds to the “remote party“ in the present document and th

41、e “forwarded-to subscriber“ in 3GPP TS 22.094 5 corresponds to the “initiating subscriber“ in the present document. NOTE 2: The forwarding of calls for remote party B to initiating subscriber A can be achieved by invoking the Call Forwarding Unconditional Supplementary Service or by making use of an

42、 equivalent operator specific service (e.g. via CAMEL). The functionality of the control of Follow Me (registration, erasure, forced erasure and interrogation) is split between the HLR of the initiating subscriber A (HLRa) and the FFN of the remote party B (FFNb). ETSI ETSI TS 123 094 V13.0.0 (2016-

43、01)73GPP TS 23.094 version 13.0.0 Release 134.1.1 Provision FM can be registered / erased / interrogated by an initiating subscriber A with respect to a remote party B if both parties are provisioned with FM. To enable forced erasure by an FM service supervisor, the FM service shall be provisioned t

44、o the FM service supervisor. Additionally, she needs the subscription entitlement to perform the forced erasure. NOTE: In general remote party B does not correspond to a GSM subscriber. In this case provisioning of FM for remote party B is operator specific. If remote party B is a GSM subscriber and

45、 if the forwarding of calls for remote party B to initiating subscriber A is achieved by invoking the Call Forwarding Unconditional Supplementary Service, provision of CFU for remote party B is required. 4.1.2 Registration The initiating subscriber registers the FM feature with respect to a particul

46、ar remote party. If an initiating subscriber A successfully registers FM with respect to a remote party B then FM becomes registered, active and operative for remote party B. As a result of the registration subsequent calls directed to remote party B are forwarded to initiating subscriber A. NOTE: T

47、he remote party cannot register FM with respect to herself. 4.1.3 Erasure If an initiating subscriber A or the FM service supervisor successfully erases FM with respect to a remote party B then FM becomes not registered and not active for remote party B. For forced erasure by the FM service supervis

48、or the previously registered subscriber shall be informed of the successful forced erasure via a network initiated USSD Notify message with appropriate contents. This message is sent by the FFN. If remote party B is a GSM subscriber and successfully erases FM then FM becomes not registered and not a

49、ctive for remote party B. 4.1.4 Interrogation If an initiating subscriber A or the FM service supervisor successfully interrogates FM with respect to a remote party B then this procedure interrogates the FM data of subscriber B. If remote party B is a GSM subscriber and successfully interrogates FM then this procedure interrogates her own FM data. 4.2 Information Flows 4.2.1 Information Flow for the handling of FM by the initiating subscriber Figure 4.1 shows the Information Flow for the control of FM (registration, erasure, forced erasure an