ETSI TS 102 587-2-2008 Electromagnetic compatibility and Radio spectrum Matters (ERM) Conformance testing for the Peer-to-Peer Digital Private Mobile Radio Part 2 Test Suite Struct.pdf

《ETSI TS 102 587-2-2008 Electromagnetic compatibility and Radio spectrum Matters (ERM) Conformance testing for the Peer-to-Peer Digital Private Mobile Radio Part 2 Test Suite Struct.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 102 587-2-2008 Electromagnetic compatibility and Radio spectrum Matters (ERM) Conformance testing for the Peer-to-Peer Digital Private Mobile Radio Part 2 Test Suite Struct.pdf（56页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 102 587-2 V1.2.1 (2008-07)Technical Specification Electromagnetic compatibilityand Radio spectrum Matters (ERM);Conformance testing for the Peer-to-PeerDigital Private Mobile Radio;Part 2: Test Suite Structure andTest Purposes (TSS Essential, or potentially Essential, IPRs notified to ETSI

2、in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as

3、 to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Electromagnetic compatibility and

4、 Radio spectrum Matters (ERM). The present document is part 2 of a multi-part deliverable covering the Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for the Peer-to-Peer Digital Private Mobile Radio, as identified below: Part 1: “Protocol Implementation Conforma

5、nce Statement (PICS) proforma“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Requirements catalogue“; Part 4: “Abstract Test Suite (ATS)“; Part 5: “Interoperability Test Suite Structure and Test Purposes (TSS Part 6: “Test descriptions (TD)“. ETSI ETSI TS 102 587-2 V1.2.1 (2008-07)

6、5 1 Scope The present document specifies the conformance Test Purposes (TPs) for the Peer-to-Peer Digital Private Mobile Radio (dPMR) standard, TS 102 490 1. TPs are defined using the TPLan notation described in ES 202 553 i.1. Test purposes have been written based on the test specification framewor

7、k described in TS 102 351 2 and based on the methodology defined in ISO/IEC 9646-2 3. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. Non-specific ref

8、erence may be made only to a complete document or a part thereof and only in the following cases: - if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the referring document; - for informative references. Referenced documents which are

9、 not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably, the primary source of the referenced document should be cited, in o

10、rder to ensure traceability. Furthermore, the reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the method of access to the referenced document and the full network address, with the same punctuation and use of upper case and lower

11、case letters. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the present document. For dated references, only

12、 the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. 1 ETSI TS 102 490 (V1.3.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital Private Mobile Radio using FDMA with a channel

13、spacing of 6,25 kHz with e.r.p. of up to 500 mW“. 2 ETSI TS 102 351 (V2.1.1): “Methods for Testing and Specification (MTS); Internet Protocol Testing (IPT); IPv6 Testing: Methodology and Framework“. 3 ISO/IEC 9646-2: “Information technology - Open Systems Interconnection - Conformance testing method

14、ology and framework - Part 2: Abstract Test Suite specification“. 4 ETSI TS 102 587-3: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital Private Mobile Radio; Part 3: Requirements catalogue“. ETSI ETSI TS 102 587-2 V1.2.1 (2008-07) 6 2.2 Informative references The

15、 following referenced documents are not essential to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. i.1 ETSI ES 202 553: “Methods for tes

16、ting and Specification (MTS); TPLan: A notation for expressing test Purposes“. 3 Abbreviations For the purposes of the present document, the following abbreviations apply: CF (Test) ConFiguration CSF Configured Services and Facilities dPMR digital Private Mobile Radio ISDM Individual Short Data Mess

17、age ISF Initial Services and Facilities IUT Implementation Under Test MS Mobile Station OACSU Off Air Call Set-Up PTT Push To Talk RC Requirements Catalogue RQ ReQuirement TP Test Purpose TSS Test Suite Structure 4 Test Suite Structure (TSS) The Test Suite Structure is based on the dPMR Requirements

18、 Catalogue (TS 102 587-3 4). It is defined by the groups within the following TPLan specification of test purposes. The numbering is not contiguous so that new TPs can be added at a later date without the need to completely renumber the TSS groups. The test purposes have been divided into three grou

19、ps: Group 1: Common requirements. Group 2: CSF requirements. Group 3: ISF requirements. The sub-grouping of these three group follows the structure of the RC. Some of the sub-groups of the RC contained no testable requirement. Headings for those sub-groups are in this test purpose document in the no

20、de group to give a full view on the relation between RQ and TSS&TP. Group 1 “ISF CSF Common“ Group 1.1 “All Call“ Group 1.2 “Channel Access“ Group 1.3 “Framing“ Group 1.3.1 “End frame“ Group 1.3.2 “Header frames“ Group 1.3.2.1 “Call information field“ Group 1.3.3 “Packet data frame“ Group 1.3.4 “Sup

21、erframe“ Group 1.3.4.1 “Type 1 data“ Group 1.3.4.2 “Type 2 data“ Group 1.3.4.3 “Voice“ Group 1.4 “Late Entry“ Group 1.5 “Powersave“ Group 1.6 “Talking Party ID“ Group 2 “CSF“ Group 2.1 “Broadcast Call“ Group 2.2 “Dialling Plan“ ETSI ETSI TS 102 587-2 V1.2.1 (2008-07) 7 Group 2.3 “Individual Short Da

22、ta Message“ Group 2.3.1 “ISDM Free Text Message“ Group 2.3.2 “ISDM Precoded Message“ Group 2.3.3 “ISDM Short File Transfer“ Group 2.3.4 “ISDM Status Message“ Group 2.4 “OACSU“ Group 2.5 “Short Appended Data“ Group 2.6 “Slow User Data“ Group 2.7 “Type 3 data“ Group 3 “ISF“ 5 Test Purposes (TP) The te

23、st purposes have been written in the formal notation TPlan. Configurations that are referenced by test purposes are shown in annex A. TPLan user definitions are listed in annex B. 5.1 ISF CSF Common Group 1 ISF CSF Common 5.1.1 All Call Group 1.1 All Call TP id : TP_PMR_0824_01 summary : ISF All Cal

24、l RQ ref : RQ_001_0824 TP type : conformance Role : ISF config : CF_dPMR_01 TC ref : TC_PMR_0824_01 with IUT in standby and using a Common_ID between 1 and 254 ensure that when IUT receives a Voice_Transmission containing Call_Data containing Common_ID set to 255 and containing audible test tone as

25、payload then IUT outputs the audible test tone - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_0858_01 summary : ISF All Call RQ ref : RQ_001_0858 TP type : conformance Role : ISF config : CF_dPMR_01 TC ref : TC_PMR_0858_01 with IUT in standby and using a Common_ID of

26、255 ensure that when IUT receives a Voice_Transmission containing Call_Data containing Common_ID set to 255 and containing audible test tone as payload then IUT outputs the audible test tone - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ETSI ETSI TS 102 587-2 V1.2.1 (2008-07) 8 TP

27、id : TP_PMR_0858_02 summary : ISF All Call RQ ref : RQ_001_0858 TP type : conformance Role : ISF config : CF_dPMR_01 TC ref : TC_PMR_0858_02 with IUT in standby and using a Common_ID of 255 ensure that when IUT receives a Voice_Transmission containing Call_Data containing Common_ID between 1 and 254

28、 and containing audible test tone as payload then IUT does not output the audible test tone - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1317_01 summary : Standard user interface transmitting All Call RQ ref : RQ_001_1317 TP type : conformance Role : CSF config : CF

29、_dPMR_01 TC ref : TC_PMR_1317_01 with IUT configured_for_Standard_User_Interface and in standby ensure that when IUT is requested to send a Voice_Transmission to all_call_address then IUT sends a Voice_Transmission with Header_Frame containing Called_Station_ID set to F8 33 A6h - xxxxxxxxxxxxxxxxxxx

30、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1317_02 summary : Standard user interface All Call within prefix RQ ref : RQ_001_1317 TP type : conformance Role : CSF config : CF_dPMR_01 TC ref : TC_PMR_1317_02 with IUT configured_for_Standard_User_Interface and in standby ensure that when

31、 IUT is requested to send a Voice_Transmission to all_call_within_a_prefix_address then IUT sends a Voice_Transmission with Header_Frame containing Called_Station_ID set to the Tx_B2_conversion of the all_call_within_a_prefix_address - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP

32、 id : TP_PMR_1317_03 summary : Standard user interface Receiving All Call RQ ref : RQ_001_1317 TP type : conformance Role : CSF config : CF_dPMR_01 TC ref : TC_PMR_1317_03 with IUT configured_for_Standard_User_Interface and in standby ensure that when IUT receives a Voice_Transmission containing Cal

33、led_Station_ID set to F8 33 A6h and containing audible test tone as payload then IUT outputs the audible test tone - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ETSI ETSI TS 102 587-2 V1.2.1 (2008-07) 9 TP id : TP_PMR_1317_04 summary : Standard user interface receiving All Call wit

34、hin a prefix RQ ref : RQ_001_1317 TP type : conformance Role : CSF config : CF_dPMR_01 TC ref : TC_PMR_1317_04 with IUT configured_for_Standard_User_Interface and in standby ensure that when IUT receives a Voice_Transmission containing Called_Station_ID set to the Tx_B2_conversion of an all_call_wit

35、hin_a_prefix_address valid for the individual_address of the IUT and containing audible test tone as payload then IUT outputs the audible test tone - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx End group 1.1 5.1.2 channel access Group 1.2 Channel Access TP id : TP_PMR_1004_01 summa

36、ry : Interference on channel RQ ref : RQ_001_1004 TP type : conformance Role : ISF, CSF config : CF_dPMR_01 TC ref : TC_PMR_1004_01 with IUT in standby and configured_for_polite_to_own_CC ensure that when TESTER sends a continuous Voice_Transmission using an invalid colour_code and a signal level of

37、 -102 dBm and IUT is requested to make a Voice_Transmission then IUT sends the Voice_Transmission - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1005_01 summary : Tx WAIT Time RQ ref : RQ_001_1005 TP type : conformance Role : ISF, CSF config : CF_dPMR_01 TC ref : TC_P

38、MR_1005_01 with IUT in standby ensure that when TESTER sends a Voice_Transmission with an End_Frame containing Tx_WAIT set to a non_zero value and IUT is requested to send a PTT_Call during the Tx_WAIT time then IUT does not transmit during the Tx_WAIT time - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

39、xxxxxxxxxxxxxxxxxxxxx ETSI ETSI TS 102 587-2 V1.2.1 (2008-07) 10TP id : TP_PMR_1007_01 summary : Acknowledgement response time RQ ref : RQ_001_1007 TP type : conformance Role : CSF config : CF_dPMR_01 TC ref : TC_PMR_1007_01 with IUT in standby and configured_for_impolite_channel_access ensure that

40、when TESTER sends a continuous Voice_Transmission using a signal level of -102 dBm and sends a Voice_Transmission using a signal level of -82 dBm with an End_Frame containing ARQ set to 01b then IUT sends an Ack_Frame - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_100

41、7_02 summary : Acknowledgement response time RQ ref : RQ_001_1007 TP type : conformance Role : CSF config : CF_dPMR_01 TC ref : TC_PMR_1007_02 with IUT in standby and configured_for_polite_to_own_CC and configured_to_use_Tack ensure that when TESTER sends a continuous Voice_Transmission using a sign

42、al level of -102 dBm and sends a Voice_Transmission using a signal level of -82 dBm with an End_Frame containing ARQ set to 01b then IUT sends an Ack_Frame within T_Ack seconds - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1007_03 summary : Acknowledgement response t

43、ime RQ ref : RQ_001_1007 TP type : conformance Role : CSF config : CF_dPMR_01 TC ref : TC_PMR_1007_03 with IUT in standby and configured_for_polite_to_own_CC ensure that when TESTER sends a continuous Voice_Transmission using a signal level of -102 dBm and sends a Voice_Transmission using a signal l

44、evel of -82 dBm with an End_Frame containing ARQ set to 01b then IUT sends an Ack_Frame after the TESTER terminates the continuous Voice_Transmission - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1008_01 summary : Party to call RQ ref : RQ_001_1008 TP type : conforma

45、nce Role : ISF, CSF config : CF_dPMR_01 TC ref : TC_PMR_1008_01 with IUT in standby ensure that when TESTER sends a continuous Voice_Transmission using a wildcard_group_address or numeric_group_address of the IUT and IUT is requested to send a PTT_Call to the same wildcard_group_address or numeric_g

46、roup_address then IUT sends the PTT_Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ETSI ETSI TS 102 587-2 V1.2.1 (2008-07) 11TP id : TP_PMR_1009_01 summary : Polite to CC RQ ref : RQ_001_1009 TP type : conformance Role : ISF config : CF_dPMR_01 TC ref : TC_PMR_1009_01 with IUT

47、in standby and configured_for_polite_to_own_CC ensure that when TESTER sends a continuous Voice_Transmission not addressed to the IUT and IUT is requested to send a Voice_Transmission then IUT does not transmit - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1010_01 su

48、mmary : Polite to CC RQ ref : RQ_001_1010 TP type : conformance Role : ISF config : CF_dPMR_01 TC ref : TC_PMR_1010_01 with IUT in standby and configured_for_impolite_channel_access ensure that when TESTER sends a continuous Voice_Transmission not addressed to the IUT and IUT is requested to send a Voice_Transmission then IUT sends that Voice_Transmission - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1011_01 summary : Polite to own group RQ ref : RQ_00