ETSI TR 102 058-2004 Satellite Earth Stations and Systems (SES) Satellite Component of UMTS IMT-2000 Evaluation of the W-CDMA UTRA FDD as a Satellite Radio Interface (V1 1 1)《卫星地面站_1.pdf

《ETSI TR 102 058-2004 Satellite Earth Stations and Systems (SES) Satellite Component of UMTS IMT-2000 Evaluation of the W-CDMA UTRA FDD as a Satellite Radio Interface (V1 1 1)《卫星地面站_1.pdf》由会员分享，可在线阅读，更多相关《ETSI TR 102 058-2004 Satellite Earth Stations and Systems (SES) Satellite Component of UMTS IMT-2000 Evaluation of the W-CDMA UTRA FDD as a Satellite Radio Interface (V1 1 1)《卫星地面站_1.pdf（154页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TR 102 058 V1.1.1 (2004-11)Technical Report Satellite Earth Stations and Systems (SES);Satellite Component of UMTS/IMT-2000;Evaluation of the W-CDMA UTRA FDD as a Satellite Radio InterfaceETSI ETSI TR 102 058 V1.1.1 (2004-11) 2 Reference DTR/SES-00078 Keywords interface, radio, satellite, UMTS

2、, WCDMA ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present docume

3、nt can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute

4、, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI

5、 documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by writte

6、n permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2004. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are

7、Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TR 102 058 V1.1.1 (2004-11) 3 Contents Intellectual Property Rights8 Foreword.8 Introduction 8 1

8、Scope 9 2 References 9 3 Definitions, symbols and abbreviations .11 3.1 Definitions11 3.2 Symbols11 3.3 Abbreviations .12 4 Satellite UMTS.13 4.1 System architecture 13 4.2 Frequency bands.14 4.2.1 Service link .14 4.2.2 Feeder links.14 4.3 Satellite system configuration 15 4.3.1 Global beam archite

9、cture 16 4.3.2 Multi-beam architecture17 4.3.3 Extended multi-beam architecture 17 4.4 User Equipment (UE).18 4.5 Intermediate Module Repeater (IMR) 18 5 W-CDMA Satellite Radio Interface.19 5.1 General description.19 5.1.1 W-CDMA key features.19 5.1.2 Key technical characteristics.19 5.1.3 Radio Int

10、erface Protocol Architecture 20 5.2 Channel structure20 5.2.1 Logical channels .21 5.2.1.1 Control channels .21 5.2.1.2 Traffic channels.21 5.2.2 Transport channels22 5.2.2.1 Common Transport channels 22 5.2.2.2 Dedicated Transport channels .22 5.2.3 Logical to Transport channels mapping22 5.2.4 Map

11、ping and association of physical channels .24 5.2.4.1 Mapping of Transport channels onto Physical channels .24 5.2.4.2 Association of physical signals .24 5.3 Physical channel structure 25 5.3.1 Downlink physical channels .25 5.3.1.1 Dedicated physical channels .25 5.3.1.1.1 Frame structuret.25 5.3.

12、1.1.2 DL-DPCCH for CPCH 26 5.3.1.2 Common physical channels.27 5.3.1.2.1 Common Pilot CHannel (CPICH) .27 5.3.1.2.2 Synchronization CHannel (SCH) 27 5.3.1.2.3 Primary Common Control Physical CHannel (P-CCPCH) .28 5.3.1.2.4 Secondary Common Control Physical CHannel (S-CCPCH)28 5.3.1.2.5 Paging Indica

13、tor CHannel (PICH).29 5.3.1.2.6 Physical Downlink Shared CHannel (PDSCH) .30 5.3.1.2.7 Acquisition Indicator CHannel (AICH).30 5.3.1.2.8 CPCH Access Preamble Acquisition Indicator CHannel (AP-AICH).31 5.3.1.2.9 CPCH Collision Detection/CHannel Assignment Indicator CHannel (CD/CA-ICH) .31 5.3.1.2.10

14、CPCH Status Indicator CHannel (CSICH) 32 5.3.1.3 Spreading and modulation.32 ETSI ETSI TR 102 058 V1.1.1 (2004-11) 4 5.3.2 Uplink Physical channels34 5.3.2.1 Uplink dedicated physical channels 34 5.3.2.1.1 Frame structure35 5.3.2.1.2 Spreading and modulation.35 5.3.2.2 Physical Random Access CHannel

15、 (PRACH) 37 5.3.2.2.1 Overall structure of random-access transmission 37 5.3.2.2.2 PRACH preamble part.37 5.3.2.2.3 PRACH message part 37 5.3.2.3 Physical Common Packet CHannel (PCPCH) 38 5.3.2.3.1 CPCH transmission .38 5.3.2.3.2 CPCH access preamble part 38 5.3.2.3.3 CPCH collision detection preamb

16、le part .38 5.3.2.3.4 CPCH power control preamble part 39 5.3.2.3.5 CPCH message part.39 5.4 Channel coding and service multiplexing 39 5.4.1 Channel coding/interleaving for user services 39 5.4.1.1 CRC attachment 40 5.4.1.2 Transport block concatenation and code block segmentation.40 5.4.1.3 Channe

17、l coding .40 5.4.1.4 Radio frame size equalization .40 5.4.1.5 Radio frame segmentation.40 5.4.1.6 TrCH multiplexing41 5.4.1.7 Insertion of discontinuous transmission (DTX) indication bits.41 5.4.1.8 Outer coding/interleaving41 5.4.1.9 Rate matching .41 5.5 Radio Resource Functions41 5.5.1 Initial s

18、pot search41 5.5.1.1 Step 1: Slot synchronization41 5.5.1.2 Step 2: Frame synchronization and code-group identification42 5.5.1.3 Step 3: Scrambling-code identification .42 5.5.2 Random Access procedure42 5.5.2.1 3GPP inherited procedure .42 5.5.2.2 Adaptation to satellite environment 43 5.5.2.2.1 T

19、ransmit power43 5.5.2.2.2 Power ramp up procedure43 5.5.2.2.3 Preamble collisions43 5.5.2.2.4 AICH .45 5.5.2.2.5 Message part reception45 5.5.3 Code allocation .45 5.5.4 Void 45 5.5.5 Power control45 5.5.5.1 Open-loop power control 45 5.5.5.2 Layer 1 closed loop power control46 5.5.5.2.1 Number of T

20、PC commands per frame.46 5.5.5.2.2 Mechanization of the inner and outer loop46 5.5.5.2.3 Layer 1 closed loop power control inhibition46 5.5.5.3 Uplink Slow closed loop power control47 5.5.5.3.1 Initial transmit power 47 5.5.5.3.2 Transmit power reconfiguration 47 5.5.5.4 Downlink Slow closed loop po

21、wer control .48 5.5.5.4.1 Initial transmit power 48 5.5.5.4.2 Transmit power adjustment .48 5.5.6 Handover 48 5.5.6.1 Intra-frequency handover 48 5.5.6.1.1 Soft handover 48 5.5.6.1.2 Softer handover .49 5.5.6.2 Inter-frequency handover 49 5.5.6.2.1 Dual-receiver .49 5.5.6.2.2 Slotted downlink transm

22、ission.50 5.5.7 Spot Selection Transmit Diversity50 5.6 W-CDMA Packet Access.50 5.6.1 Common-channel packet transmission .50 ETSI ETSI TR 102 058 V1.1.1 (2004-11) 5 5.6.2 Dedicated-channel packet transmission51 5.6.2.1 Single-packet transmission51 5.6.2.2 Multi-packet transmission.51 5.7 Support of

23、TDD52 6 Performance requirements52 6.1 Test environment support.52 6.1.1 Satellite environments.52 6.1.2 Intermediate Module Repeater environment.53 6.1.3 Combined Satellite and IMR environment .53 6.1.4 Aeronautical environment.54 6.2 Expected performances 55 6.2.1 Performance requirement for RACH

24、55 6.2.1.1 Preamble detection55 6.2.1.2 Demodulation of RACH message .55 6.2.2 FACH demodulation requirements .56 6.2.3 Downlink DCH demodulation requirements 56 6.2.3.1 Summary of test measurement services 56 6.2.3.2 Margins .56 6.2.3.3 Demodulation in static conditions.57 6.2.3.4 Demodulation in I

25、TU channel model A conditions 57 6.2.3.5 Demodulation in ITU channel model B conditions.58 6.2.3.6 Demodulation in ITU channel model C conditions.59 6.2.3.7 Demodulation in IMR environment conditions (no satellite signal reception) .60 6.2.3.8 Demodulation in combined satellite and IMR environment c

26、onditions61 6.2.3.9 Demodulation in aeronautical environment 61 6.2.4 Uplink DCH demodulation requirements .62 6.2.4.1 Summary of test measurement services 62 6.2.4.2 Margins .62 6.2.4.3 Demodulation in static conditions.63 6.2.4.4 Demodulation in ITU channel model A conditions 63 6.2.4.5 Demodulati

27、on in ITU channel model B conditions.64 6.2.4.6 Demodulation in ITU channel model C conditions.64 6.2.4.7 Demodulation in IMR environment conditions (no satellite signal reception) .64 6.2.4.8 Demodulation in combined satellite and IMR environment conditions64 6.2.4.9 Demodulation in aeronautical en

28、vironment 65 6.2.5 Demodulation requirements synthesis 65 6.2.5.1 Propagation Link Margin 65 6.2.5.1.1 Satellite signal LOS view 65 6.2.5.1.2 Satellite signal NLOS view .66 6.2.5.2 Increasing interleaving depth 66 6.2.5.2.1 Downlink.66 6.2.5.2.2 Uplink67 6.2.5.3 Spatial diversity.67 6.2.5.3.1 UE ant

29、enna diversity .67 6.2.5.3.2 Satellite diversity.67 6.2.5.4 Slow Power Control performance .72 6.2.5.4.1 Uplink Slow Power Control 73 6.2.5.4.2 Downlink Slow Power Control75 6.2.5.5 Multi User Detection.77 6.2.6 Acquisition efficiency.78 6.3 Satellite transmitter characteristics.79 6.4 UE characteri

30、stics.81 6.5 IMR characteristics.81 7 System capacity82 7.1 Downlink82 7.1.1 Static environment 83 7.1.1.1 Data service 1,2 kbps 83 7.1.1.2 Speech service 4,75 kbps 83 7.1.1.3 Speech service 12,2 kbps 84 7.1.1.4 Data service 64 kbps .84 ETSI ETSI TR 102 058 V1.1.1 (2004-11) 6 7.1.1.5 Data service 14

31、4 kbps .85 7.1.1.6 Data service 384 kbps .85 7.1.2 Rural environment, LOS.86 7.1.3 Sub-urban environment, LOS .87 7.1.4 Urban environment, LOS88 7.1.5 Mobile environment without LOS and/or indoor penetration.89 7.1.6 Combined satellite and IMR environment 90 7.2 Uplink.90 7.2.1 Static environment 91

32、 7.2.1.1 Data service 1,2 kbps 91 7.2.1.2 Speech service 4,75 kbps 91 7.2.1.3 Speech service 12,2 kbps 92 7.2.1.4 Data service 64 kbps .92 7.2.1.5 Data service 144 kbps .93 7.2.1.6 Data service 384 kbps .93 7.2.2 Rural environment, LOS.93 7.2.3 Sub-urban environment, LOS .94 7.2.4 Urban environment,

33、 LOS95 7.2.5 Combined satellite and IMR environment 96 8 Technology design constraints .96 8.1 Doppler frequency shift96 8.1.1 Doppler shift due to satellite movement .96 8.1.2 Doppler shift due to UE movement 97 8.2 Interoperability.97 8.2.1 Dual mode UEs.97 8.2.2 Intermediate Module Repeaters 97 8

34、.2.3 Inter-system handover.97 8.2.4 Compatibility with existing systems.97 8.3 Performance enhancement features98 8.4 System flexibility .98 9 Conclusion99 Annex A: Downlink Reference measurement channels100 A.1 Data service 1,2 kbps100 A.2 Speech 4,75 kbps101 Annex B: Uplink Reference measurement c

35、hannels.102 B.1 Data service 1,2 kbps102 B.2 Speech 4,75 kbps102 Annex C: Link budgets103 C.1 Downlink103 C.1.1 Data service 1,2 kbps105 C.1.2 Speech service 4,75 kbps106 C.1.3 Speech service 12,2 kbps107 C.1.4 Data service 64 kbps.108 C.1.5 Data service 144 kbps.109 C.1.6 Data service 384 kbps.110

36、C.2 Uplink.111 C.2.1 Data service 1,2 kbps112 C.2.2 Speech service 4,75 kbps113 C.2.3 Speech service 12,2 kbps114 C.2.4 Data service 64 kbps.115 C.2.5 Data service 144 kbps.116 C.2.6 Data service 384 kbps.117 Annex D: System capacity - detailed results118 ETSI ETSI TR 102 058 V1.1.1 (2004-11) 7 D.1

37、Downlink118 D.1.1 Mobile Satellite environment, LOS118 D.1.1.1 Data service 1,2 kbps119 D.1.1.2 Speech service 4,75 kbps 120 D.1.1.3 Speech service 12,2 kbps 121 D.1.1.4 Data service 64 kbps.122 D.1.1.5 Data service 144 kbps.123 D.1.1.6 Data service 384 kbps.124 D.1.2 Mobile environment without LOS

38、and/or indoor penetration 125 D.1.2.1 Data service 1,2 kbps125 D.1.2.2 Speech service 4,75 kbps 125 D.1.2.3 Speech service 12,2 kbps 126 D.1.2.4 Data service 64 kbps.126 D.1.2.5 Data service 144 kbps.127 D.1.2.6 Data service 384 kbps.127 D.1.3 IMR deployment 127 D.1.3.1 Data service 1,2 kbps127 D.1.

39、3.2 Speech 4,75 kbps 128 D.1.3.3 Speech 12,2 kbps 128 D.1.3.4 Data service 64 kbps.129 D.1.3.5 Data service 144 kbps.130 D.1.3.6 Data service 384 kbps.130 D.2 Uplink.131 D.2.1 Mobile Satellite environment, LOS131 D.2.1.1 Data service 1,2 kbps132 D.2.1.2 Speech service 4,75 kbps 133 D.2.1.3 Speech se

40、rvice 12,2 kbps 134 D.2.1.4 Data service 64 kbps.135 D.2.1.5 Data service 144 kbps.136 D.2.1.6 Data service 384 kbps.137 Annex E: “W-CDMA“ Radio transmission technologies description template.138 E.1 Test environment support.138 E.2 Technical parameters138 E.3 Expected performances 147 E.4 Technolog

41、y design constraints .149 E.5 Information required for terrestrial link budget template.152 E.6 Satellite system configuration 152 History 154 ETSI ETSI TR 102 058 V1.1.1 (2004-11) 8 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared t

42、o ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is av

43、ailable from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not refere

44、nced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Report (TR) has been produced by ETSI Technical Committee Satellite Earth Stations and Systems (SES). Introduction The objective of using W-

45、CDMA in a satellite environment is to ease integration of satellite and terrestrial UMTS. Some of the benefits to be gained from a fully integrated S-UMTS/T-UMTS system are: seamless service provision; re-use of terrestrial equipment: User Equipment and network infrastructure equipment (Node B, RNC,

46、 etc.); highly integrated multi-mode terrestrial/satellite terminals. The satellite component of UMTS may provide services: in areas covered by cellular terrestrial systems, where terrestrial coverage requires capacity complement; in areas where terrestrial coverage is not available: - because terre

47、strial networks have not been deployed for business attractiveness reasons; or - because terrestrial system has suffered environmental damages (crisis conditions). Based on the methodology defined by ITU-R, the outline of the present document is the following: In clause 4, the system architecture an

48、d examples of candidate satellite constellations are presented. Clause 5 summarizes key characteristics based on the Technical Specifications defined by 3GPP. Adaptation of radio resource functions to satellite environment is approached. Clause 6 specifies test environment and equipment performance

49、requirements. Clause 7 presents system capacity. Clause 8 summarizes constraints due to satellite environment. The concluding clause 9 is a brief summary of the results established so far. The present document is completed with five annexes. Annexes A and B specify reference measurement channels. Annex C provides typical link budgets. Annex D presents detailed system capacity results. Annex E is the ITU-R template used in M.1225 1 the evaluation of the Radio Interfaces. ETSI ETSI TR 102 058 V1.1.1 (2004-11) 9 1 Scope The present document evaluates the feasibility to