ETSI EN 303 339-2016 Broadband Direct Air-to-Ground Communications Equipment operating in the 1 900 MHz to 1 920 MHz and 5 855 MHz to 5 875 MHz frequency bands Fixed pattern antenn_1.pdf

《ETSI EN 303 339-2016 Broadband Direct Air-to-Ground Communications Equipment operating in the 1 900 MHz to 1 920 MHz and 5 855 MHz to 5 875 MHz frequency bands Fixed pattern antenn_1.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 303 339-2016 Broadband Direct Air-to-Ground Communications Equipment operating in the 1 900 MHz to 1 920 MHz and 5 855 MHz to 5 875 MHz frequency bands Fixed pattern antenn_1.pdf（37页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 303 339 V1.1.1 (2016-06) Broadband Direct Air-to-Ground Communications; Equipment operating in the 1 900 MHz to 1 920 MHz and 5 855 MHz to 5 875 MHz frequency bands; Fixed pattern antennas; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU HARMON

2、ISED EUROPEAN STANDARD ETSI ETSI EN 303 339 V1.1.1 (2016-06) 2 Reference DEN/BRAN-0060014 Keywords 3G, 3GPP, aeronautical, broadband, cellular, E-UTRA, IMT, IMT-2000, IMT-Advanced, LTE, mobile, network, radio, regulation, UMTS, WCDMA ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANC

3、E Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made

4、 available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the

5、 only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and

6、 other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced o

7、r utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction exten

8、d to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members

9、and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 303 339 V1.1.1 (2016-06) 3 Content Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g3Executive summary 7g3Introduction 7g31 Scope 8g32 Refere

10、nces 8g32.1 Normative references . 8g32.2 Informative references 8g33 Definitions, symbols and abbreviations . 9g33.1 Definitions 9g33.2 Symbols 9g33.3 Abbreviations . 9g34 Technical requirements specifications . 10g34.1 Environmental profile . 10g34.2 Conformance requirements 10g34.2.1 Introduction

11、. 10g34.2.2 Spectrum Emission Mask . 11g34.2.2.1 Definition 11g34.2.2.2 Limits 11g34.2.2.3 Conformance . 11g34.2.3 Transmitter Adjacent Channel Leakage Power (1 900 MHz to 1 920 MHz) 11g34.2.3.1 Definition 11g34.2.3.2 Limits 12g34.2.3.3 Conformance . 12g34.2.4 Transmitter spurious emissions and maxi

12、mum unwanted emissions in the band 5,250 GHz to 5,850 GHz . 12g34.2.4.1 Definition 12g34.2.4.2 Limits 12g34.2.4.3 Measurement bandwidths 12g34.2.4.4 Conformance . 12g34.2.5 Maximum output power 13g34.2.5.1 Definition 13g34.2.5.2 Limits - Ground Station 13g34.2.5.3 Limits - Aircraft Station 13g34.2.5

13、.4 Conformance . 13g34.2.6 Altitude attenuation factor - Aircraft Station 13g34.2.6.1 Definition 13g34.2.6.2 Limits 13g34.2.6.3 Conformance . 13g34.2.7 Compatibility with BFWA - Aircraft Station . 13g34.2.7.1 Definition 13g34.2.7.2 Limits 14g34.2.7.3 Conformance . 14g34.2.8 Receiver Minimum Sensitiv

14、ity . 14g34.2.8.1 Definition 14g34.2.8.2 Limit 14g34.2.8.3 Conformance . 14g34.2.9 Receiver Spurious Response . 14g34.2.9.1 Definition 14g34.2.9.2 Limit 14g34.2.9.3 Conformance . 15g34.2.10 Receiver Adjacent Channel Selectivity. 15g3ETSI ETSI EN 303 339 V1.1.1 (2016-06) 4 4.2.10.1 Definition 15g34.2

15、.10.2 Limit 15g34.2.10.3 Conformance . 15g34.2.11 Receiver Intermodulation Rejection . 15g34.2.11.1 Definition 15g34.2.11.2 Limit 15g34.2.11.3 Conformance . 16g34.2.12 Receiver Blocking 16g34.2.12.1 Definition 16g34.2.12.2 Limit 16g34.2.12.3 Conformance . 17g34.2.13 Dedicated Antennas - Radiation Pa

16、ttern Envelopes 17g34.2.13.1 Aircraft station 17g34.2.13.2 Ground station . 18g34.2.13.2.1 Sectorial antenna . 18g34.2.13.2.2 Directional antenna 19g34.2.13.2.3 Omnidirectional antenna 20g34.2.13.3 Conformance . 20g34.2.14 Dedicated Antenna Gain Requirements 20g34.2.14.1 General 20g34.2.14.2 Antenna

17、 Maximum Gain . 21g34.2.14.3 Conformance . 21g35 Testing for compliance with technical requirements 21g35.1 Environmental conditions for testing . 21g35.1.1 Ground and Aircraft Station Transceivers 21g35.1.2 Ground and Aircraft Station Antennas 21g35.2 Interpretation of the measurement results 21g35

18、.3 Essential radio test suites 22g35.3.1 Introduction. 22g35.3.2 Spectrum Emission Mask . 23g35.3.2.1 Initial conditions . 23g35.3.2.2 Procedure 23g35.3.2.3 Test requirement . 23g35.3.3 Transmitter adjacent channel leakage power ratio (ACLR) 23g35.3.3.1 Initial conditions . 23g35.3.3.2 Procedure 23g

19、35.3.3.3 Test requirement . 23g35.3.4 Transmitter spurious emissions . 24g35.3.4.1 Initial conditions . 24g35.3.4.2 Procedure 24g35.3.4.3 Test requirement . 24g35.3.5 Transmitter maximum output power. 24g35.3.5.1 Initial conditions . 24g35.3.5.2 Procedure 24g35.3.5.3 Test requirement . 24g35.3.6 Alt

20、itude attenuation factor - Aircraft Station 24g35.3.6.1 Initial conditions . 24g35.3.6.2 Procedure 24g35.3.6.3 Test requirement . 25g35.3.7 Compatibility with BFWA - Aircraft Station . 25g35.3.7.1 Initial conditions . 25g35.3.7.2 Procedure 25g35.3.7.3 Test requirement . 25g35.3.8 Receiver Minimum Se

21、nsitivity . 25g35.3.8.1 Initial conditions . 25g35.3.8.2 Procedure 25g35.3.8.3 Test requirement . 25g35.3.9 Receiver Spurious Response . 26g35.3.9.1 Initial conditions . 26g35.3.9.2 Procedure 26g35.3.9.3 Test requirement . 26g3ETSI ETSI EN 303 339 V1.1.1 (2016-06) 5 5.3.10 Receiver Adjacent Channel

22、Selectivity. 26g35.3.10.1 Initial conditions . 26g35.3.10.2 Procedure 26g35.3.10.3 Test requirement . 26g35.3.11 Receiver Intermodulation Rejection . 27g35.3.11.1 Initial conditions . 27g35.3.11.2 Procedure 27g35.3.11.3 Test requirement . 27g35.3.12 Receiver Blocking 27g35.3.12.1 Initial conditions

23、. 27g35.3.12.2 Procedure 27g35.3.12.3 Test requirement . 27g35.3.13 Dedicated antennas . 27g3Annex A (normative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 28g3Annex B (normative): Test specification 30g3B.1 Normal test environment 30g3B.2 RF

24、Signals 30g3B.2.1 Bandwidth 30g3B.2.2 Channels . 30g3B.3 Test Configurations 30g3B.3.1 Maximum output power, transmitter spurious emissions and operating band unwanted emissions 30g3B.3.2 Altitude Attenuation factor . 31g3B.3.3 Receiver ACS, Blocking and Spurious . 31g3B.3.4 Receiver Intermodulation

25、 . 32g3Annex C (informative): Environmental profile specification . 33g3Annex D (normative): Geographical Data . 34g3D.1 Introduction 34g3D.2 Altitude determination 34g3D.3 BFWA mitigation . 34g3D.4 Time currency 34g3Annex E (informative): Bibliography . 35g3Annex F (informative): Change History 36g

26、3History 37g3ETSI ETSI EN 303 339 V1.1.1 (2016-06) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and ca

27、n be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETS

28、I IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword

29、 This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Broadband Radio Access Networks (BRAN). The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.7 to provide one voluntary means of conforming to the essential requ

30、irements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC i.1. Once the present document is cited in the Official Journal of the European Union under that Directive, compl

31、iance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. National transposition dates Date

32、 of adoption of this EN: 21 June 2016 Date of latest announcement of this EN (doa): 30 September 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 March 2017 Date of withdrawal of any conflicting National Standard (dow): 31 March 2018 Modal verbs terminol

33、ogy In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ET

34、SI deliverables except when used in direct citation. ETSI ETSI EN 303 339 V1.1.1 (2016-06) 7 Executive summary The present document addresses the Broadband Direct Air-to-Ground Communications system based on the ETSI System Reference Document ETSI TR 103 108 i.6. This System Requirement document was

35、 used by the ECC, in conjunction with other contributions, to develop technology neutral ECC Decisions on the allocation of European spectrum in the frequency bands 1 900 MHz to 1 920 MHz and 5 855 MHz to 5 875 MHz. The technical requirements in the present document reflect, in part, the results of

36、studies undertaken within the CEPT on compatibility between broadband direct air-to-ground systems and other applications operating within, or adjacent to, the frequency bands that are designated for Broadband DA2GC operations. Introduction The technical requirements in the present document reflect,

37、 in part, the results of studies undertaken within the CEPT on compatibility between broadband direct air-to-ground systems and other applications operating within, or adjacent to, the frequency bands which are designated for BDA2GC operations. These studies are described in ECC Report 209 i.2 (for

38、the 1 900 MHz to 1 920 MHz band) and ECC Report 210 i.3 (for the 5 855 MHz to 5 875 MHz band). The resulting technical and operational requirements to be applied to BDA2GC systems in the 1 900 MHz to 1 920 MHz bands and the 5 855 MHz to 5 875 MHz bands are contained within ECC Decision(15)02 i.4 and

39、 ECC Decision(15)03 i.5 respectively. ETSI ETSI EN 303 339 V1.1.1 (2016-06) 8 1 Scope The present document applies to the Ground Station, Aircraft Station and antenna equipment for DA2GC (TDD). This radio equipment type is capable of operating in all or any part of the frequency bands given in table

40、 1. Table 1: DA2GC TDD service frequency bands Direction of Transmission Frequency Band Transmit 1 1 900 MHz to 1 920 MHz Receive 1 1 900 MHz to 1 920 MHz Transmit 2 5 855 MHz to 5 875 MHz Receive 2 5 855 MHz to 5 875 MHz The present document contains requirements to demonstrate that radio equipment

41、 both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, o

42、nly the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any

43、hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI EN 301 126-3-2 (V1.2.1) (12-2003): “Fixed Radio Systems; Conformance testing;

44、 Part 3-2: Point-to-Multipoint antennas - Definitions, general requirements and test procedures“. 2 NIMA Technical Report TR8350.2 (1984, including amendment 1 of 03 January 2000 and amendment 2 of 23 June 2004): “Department of Defense World Geodetic System 1984. Its Definition and Relationships wit

45、h Local Geodetic Systems“. NOTE: Available at http:/earth-info.nga.mil/GandG/publications/tr8350.2/wgs84fin.pdf. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the ci

46、ted version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced docum

47、ents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making a

48、vailable on the market of radio equipment and repealing Directive 1999/5/EC. ETSI ETSI EN 303 339 V1.1.1 (2016-06) 9 i.2 ECC Report 209: “Compatibility/sharing studies related to Broadband Direct-Air-to-Ground Communications (DA2GC) in the frequency bands 1900-1920 MHz / 2010-2025 MHz and services/a

49、pplications in the adjacent bands“. i.3 ECC Report 210: “Compatibility/sharing studies related to Broadband Direct-Air-to-Ground Communications (DA2GC) in the frequency bands 5855-5875 MHz, 2400-2483.5 MHz and 3400-3600 MHz“. i.4 ECC Decision ECC/DEC(15)02: “The harmonised use of broadband Direct Air-to-Ground Communications (DA2GC) systems in the frequency band 1900-1920 MHz“. i.5 ECC Decision ECC/ DEC(15)03: “The harmonised use of broadband Direct Air-to-Ground Communications (DA2GC) systems in the frequency band 5855-5875 MHz“. i.6 ETSI TR 1