ETSI EN 301 908-19-2016 IMT cellular networks Harmonised Standard covering the essential requirements of article 3 2 of the Directive 2014 53 EU Part 19 OFDMA TDD WMAN (Mobile WiMA_1.pdf

《ETSI EN 301 908-19-2016 IMT cellular networks Harmonised Standard covering the essential requirements of article 3 2 of the Directive 2014 53 EU Part 19 OFDMA TDD WMAN (Mobile WiMA_1.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 301 908-19-2016 IMT cellular networks Harmonised Standard covering the essential requirements of article 3 2 of the Directive 2014 53 EU Part 19 OFDMA TDD WMAN (Mobile WiMA_1.pdf（39页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 301 908-19 V6.3.1 (2016-05) IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 19: OFDMA TDD WMAN (Mobile WiMAXTM) TDD User Equipment (UE) HARMONISED EUROPEAN STANDARD ETSI ETSI EN 301 908-19 V6.3.1 (2016-05)2 Refe

2、rence REN/MSG-TFES-11-19-RED Keywords IMT, IMT-2000, mobile, OFDMA, radio, regulation, TDD, WiMAX, WMAN ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la

3、Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document sha

4、ll not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI

5、Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present docum

6、ent, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by wri

7、tten permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UM

8、TSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ET

9、SI EN 301 908-19 V6.3.1 (2016-05)3 Contents Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g3Introduction 6g31 Scope 7g32 References 7g32.1 Normative references . 7g32.2 Informative references 7g33 Definitions, symbols and abbreviations . 8g33.1 Definitions 8g33.2 Symbols 9g3

10、3.3 Abbreviations . 9g34 Technical requirements specification . 10g34.1 Environmental profile . 10g34.2 Conformance requirements 10g34.2.0 General 10g34.2.1 Introduction. 10g34.2.2 Transmitter Maximum Output Power . 10g34.2.2.1 Definition 10g34.2.2.2 Limits 11g34.2.2.3 Conformance . 11g34.2.3 Transm

11、itter Spectrum Emission Mask 11g34.2.3.1 Definition 11g34.2.3.2 Limits 11g34.2.3.2.1 Requirements for 5 MHz channel bandwidth 11g34.2.3.2.2 Requirements for 10 MHz channel bandwidth 11g34.2.3.3 Conformance . 12g34.2.4 Transmitter Spurious Emissions . 12g34.2.4.1 Definition 12g34.2.4.2 Limits 12g34.2

12、.4.2.1 Requirements for 5 MHz channel bandwidth 12g34.2.4.2.2 Requirements for 10 MHz channel bandwidth 13g34.2.4.2.3 Requirements for UE Coexistence. 13g34.2.4.3 Conformance . 13g34.2.5 Transmitter Minimum Output Power 13g34.2.5.1 Definition 13g34.2.5.2 Limits 13g34.2.5.3 Conformance . 13g34.2.6 Re

13、ceiver Adjacent Channel Selectivity (ACS) . 14g34.2.6.1 Definition 14g34.2.6.2 Limits 14g34.2.6.3 Conformance . 14g34.2.7 Receiver Blocking Characteristics 14g34.2.7.1 Definition 14g34.2.7.2 Limits 14g34.2.7.3 Conformance . 16g34.2.8 Receiver Spurious Response . 16g34.2.8.1 Definition 16g34.2.8.2 Li

14、mits 16g34.2.8.3 Conformance . 17g34.2.9 Receiver Intermodulation Characteristics . 17g34.2.9.1 Definition 17g34.2.9.2 Limits 17g34.2.9.3 Conformance . 18g3ETSI ETSI EN 301 908-19 V6.3.1 (2016-05)4 4.2.10 Receiver Spurious Emissions 18g34.2.10.1 Definition 18g34.2.10.2 Limits 18g34.2.10.3 Conformanc

15、e . 18g34.2.11 Transmitter Adjacent Channel Leakage Power Ratio . 18g34.2.11.1 Definition 18g34.2.11.2 Limits 18g34.2.11.2.1 Requirements for 5 MHz channel bandwidth 19g34.2.11.2.2 Requirements for 10 MHz channel bandwidth 19g34.2.11.3 Conformance . 19g34.2.12 Receiver reference sensitivity level 19

16、g34.2.12.1 Definition 19g34.2.12.2 Limits 20g34.2.12.3 Conformance . 20g35 Testing for compliance with technical requirements 20g35.1 Environmental conditions for testing . 20g35.2 Product information 20g35.3 Interpretation of the measurement results 20g35.4 Essential radio test suites 21g35.4.1 Tra

17、nsmitter Maximum and Minimum Output Power . 21g35.4.1.1 Method of measurement 21g35.4.1.1.1 Initial conditions 22g35.4.1.1.2 Procedure . 22g35.4.1.2 Test requirements 22g35.4.2 Transmitter Spectrum Emission Mask 23g35.4.2.1 Method of measurement 23g35.4.2.1.1 Initial conditions 23g35.4.2.1.2 Procedu

18、re . 23g35.4.2.2 Test requirements 24g35.4.3 Transmitter spurious emissions . 24g35.4.3.1 Method of measurement 24g35.4.3.1.1 Initial conditions 25g35.4.3.1.2 Procedure . 25g35.4.3.2 Test requirements 25g35.4.4 Receiver Adjacent Channel Selectivity (ACS) . 25g35.4.4.1 Method of measurement 25g35.4.4

19、.1.1 Initial conditions 26g35.4.4.1.2 Procedure . 26g35.4.4.2 Test requirements 26g35.4.5 Receiver Blocking Characteristics 26g35.4.5.1 Method of measurement 27g35.4.5.1.1 Initial conditions 27g35.4.5.1.2 Procedure . 27g35.4.5.2 Test requirements 28g35.4.6 Receiver Spurious Response . 28g35.4.6.1 Me

20、thod of measurement 28g35.4.6.1.1 Initial conditions 28g35.4.6.1.2 Procedure . 28g35.4.6.2 Test requirements 29g35.4.7 Receiver Intermodulation characteristics 29g35.4.7.1 Method of measurement 29g35.4.7.1.1 Initial conditions 30g35.4.7.1.2 Procedure . 30g35.4.7.2 Test requirements 30g35.4.8 Receive

21、r Spurious Emissions 30g35.4.8.1 Method of measurement 31g35.4.8.1.1 Initial conditions 31g35.4.8.1.2 Procedure . 31g35.4.8.2 Test requirements 31g35.4.9 Transmitter Adjacent Channel Leakage Power Ratio . 31g35.4.9.1 Method of measurement 31g3ETSI ETSI EN 301 908-19 V6.3.1 (2016-05)5 5.4.9.1.1 Initi

22、al conditions 32g35.4.9.1.2 Procedure . 32g35.4.9.2 Test requirements 33g35.4.10 Receiver reference sensitivity level 33g35.4.10.1 Method of test . 33g35.4.10.2 Test requirement . 33g3Annex A (normative): Relationship between the present document and the essential requirements of Directive 2014/53/E

23、U . 34g3Annex B (normative): Environmental profile . 36g3Annex C (informative): Void . 37g3Annex D (informative): Bibliography . 38g3History 39g3ETSI ETSI EN 301 908-19 V6.3.1 (2016-05)6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declar

24、ed to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which i

25、s available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ET

26、SI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). The present document has been prepared under the C

27、ommissions standardisation request C(2015) 5376 final i.8 to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive

28、 1999/5/EC i.2. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A-1 confers, within the limits of the scope of the present document, a presumption of conformity with th

29、e corresponding essential requirements of that Directive, and associated EFTA regulations. The present document is part 19 of a multi-part deliverable. Full details of the entire series can be found in part 1 i.9. National transposition dates Date of adoption of this EN: 20 April 2016 Date of latest

30、 announcement of this EN (doa): 31 July 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 January 2017 Date of withdrawal of any conflicting National Standard (dow): 31 January 2018 Modal verbs terminology In the present document “shall“, “shall not“, “sh

31、ould“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation.

32、Introduction The present document is part of a set of standards developed by ETSI that are designed to fit in a modular structure to cover radio equipment within the scope of the Radio Equipment Directive i.2. The present document is produced following the guidance in ETSI EG 203 336 i.3 as applicab

33、le. ETSI ETSI EN 301 908-19 V6.3.1 (2016-05)7 1 Scope The present document applies to the following radio equipment type: User Equipment for IMT-2000 OFDMA TDD WMAN (Mobile WiMAXTM) operating in TDD mode. This radio equipment type is capable of operating in all or any part of the frequency bands giv

34、en in table 1-1. Table 1-1: OFDMA TDD WMAN User Equipment frequency bands Mobile WiMAXTMBand Class Index IMT-2000 OFDMA TDD WMAN service operating bands Channel Bandwidth 1.B 2 300 MHz to 2 400 MHz 5 MHz and 10 MHz 3.A 2 500 MHz to 2 690 MHz 5 MHz and 10 MHz 5L.A 3 400 MHz to 3 600 MHz 5 MHz 5L.C 3

35、400 MHz to 3 600 MHz 10 MHz 5H.A 3 600 MHz to 3 800 MHz 5 MHz 5H.C 3 600 MHz to 3 800 MHz 10 MHz The present document contains requirements to demonstrate that Radio equipment both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference. In addition t

36、o the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the Radio Equipment Directive 2014/53/EU i.2 may apply to equipment within the scope of the present document. NOTE: A list of such ENs is included on the web s

37、ite http:/www.newapproach.org. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of

38、 the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI ca

39、nnot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 WMF-T25-002-R010v06 (2012): “WiMAX ForumTest Procedures - Mobile Radio Conformance Tests“ - Release 1 v0.6. 2 CEPT/ERC/Recommendation 74-01E (Edition of January, 2

40、011) (Sifok 98, Nice 99, Sesimbra 02, Hradec Kralove 05, Cardiff 11): “Unwanted emissions in the spurious domain“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the

41、cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced doc

42、uments are not necessary for the application of the present document but they assist the user with regard to a particular subject area. ETSI ETSI EN 301 908-19 V6.3.1 (2016-05)8 i.1 Recommendation ITU-R SM.329-12 (2012): “Unwanted emissions in the spurious domain“. i.2 Directive 2014/53/EU of the Eu

43、ropean Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC (Text with EEA relevance). i.3 ETSI EG 203 336 (V1.1.1) (2015): “Electromagnetic compatibili

44、ty and Radio spectrum Matters (ERM); Guide for the selection of technical parameters for the production of Harmonised Standards covering article 3.1(b) and article 3.2 of Directive 2014/53/EU“. i.4 ETSI TR 102 215 (V1.3.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Recommended

45、 approach, and possible limits for measurement uncertainty for the measurement of radiated electromagnetic fields above 1 GHz“. i.5 ETSI EN 300 019-1-0: “Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-0: Classification of env

46、ironmental conditions; Introduction“. i.6 ETSI TR 100 028 (all parts) (V1.4.1): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics“. i.7 Void. i.8 Commission Implementing Decision C(2015) 5376 final of 4.8.2015

47、on a standardisation request to the European Committee for Electrotechnical Standardisation and to the European Telecommunications Standards Institute as regards radio equipment in support of Directive 2014/53/EU of the European Parliament and of the Council. i.9 ETSI EN 301 908-1 (V11.1.1): “IMT ce

48、llular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Introduction and common requirements“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in Di

49、rective 2014/53/EU i.2 and the following apply: burst: period during which radio waves are intentionally transmitted, preceded and succeeded by periods during which no intentional transmission is made environmental profile: declared range of environmental conditions under which equipment within the scope of the present document is required to be compliant integral antenna: antenna which is declared to be part of the radio equipment by the manufacturer NOTE: Even when equipment with an integral antenna is concerned, it might still be p