ETSI EN 300 761-2-2001 Electromagnetic Compatibility and Radio Spectrum Matters (ERM) Short Range Devices (SRD) Automatic Vehicle Identification (AVI) for Railways Operating in the.pdf

《ETSI EN 300 761-2-2001 Electromagnetic Compatibility and Radio Spectrum Matters (ERM) Short Range Devices (SRD) Automatic Vehicle Identification (AVI) for Railways Operating in the.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 300 761-2-2001 Electromagnetic Compatibility and Radio Spectrum Matters (ERM) Short Range Devices (SRD) Automatic Vehicle Identification (AVI) for Railways Operating in the.pdf（13页珍藏版）》请在麦多课文档分享上搜索。

1、ETSI EN 300 761-2 1.1.1 (2001-06) Candidate Harmonized European Standard (Telecommunications series) Electromagnetic com pati bi I ity and Radio spectrum Matters (ERM); Short Range Devices (SRD); Automatic Vehicle Identification (AVI) for railways operating in the 2,45 GHz frequency range; Part 2: H

2、armonized standard covering essential requirements under article 3.2 of the R Essential, orpotentially Essential, IPRs notjed to ETSI in respect OfETSIstandards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (htt:/!wvw.etsi ordj r). Pursuant to th

3、e ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR O00 3 14 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Fo

4、reword This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (EM). The present document has been produced by ETSI in response to a mandate from the European Commission issued unde

5、r Council Directive 98/34/EC 5 laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities

6、referencing the Directive 1999/5/EC i of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (“the R Automatic Vehicle Identification (AVI) for railways operating in the 2,45 GHz freque

7、ncy range, as identified below: Part 1 : Part 2: “Technical characteristics and methods of measurement“; “Harmonized standard covering essential requirements under article 3.2 of the R it provides scope for standards under articles 3.2 and 3.3 to be added when new frequency bands are agreed or when

8、the Commission takes decisions under article 3 without requiring alteration of standards that are already published; it clarifies, simplifies and promotes the usage of Harmonized Standards as the relevant means of conformity assessment. - - ETSI 7 ETSI EN 300 761-2 V1.l.l (2001-06) 1 Scope The prese

9、nt document applies to a dedicated 2,45 GHz Short Range Device (SRD) microwave link intended for a European wide data communication system for Railway applications, Automatic Vehicle Identification (AVI) which fulfil the Union Internationale des Chemins de fer (UIC) specifications and are interopera

10、ble with the current UIC system except for the interrogator (Track Units (TU) bandwidth. The present document contains the technical characteristics for radio equipment and is referencing by CEPT/ERC Recommendation T/R 70-03 4. The Interrogator bandwidth is limited to 8 MHz shared within five channe

11、ls: - - for data transmission only; - with a Radio Frequency (RF) output connection and specified antenna or with an integral antenna; operating on radio frequencies in the 2,446 GHz to 2,454 GHz Industrial, Scientific and Medical (ISM) band, with power levels up to 500 mW e.i.r.p. The present docum

12、ent is a product standard covering various Railway applications where the data transmission of the system will be active only during the presence of the train. The present document covers fixed installed interrogators (TUS) and transponders (mobile stations). For certain measurements the transponder

13、s are measured together with the whole interrogating system. The in-track base station (interrogator) transmit and receive modulations are a combination of Amplitude Shift Keying (ASK) and Frequency Shift Keying (FSK) respectively. The present document supports the necessary transmitter and receiver

14、 data rates between 192 kbit/s and 3 84 kbit/s according to the type of transaction. It covers the minimum characteristics considered necessary in order to make the best use of the available frequencies. It does not necessarily include all the characteristics which may be required by a user, nor doe

15、s it necessarily represent the optimum performance achievable. The present document includes specifications for methods of measurement for equipment fitted with antenna sockets andor integral antenna. The technical requirements of the present document apply under the environmental profile for operat

16、ion of the equipment, which shall be declared by the manufacturer. The equipment shall comply with all the technical requirements of the present document at all times when operating within the boundary limits of the declared operational environmental profile. The present document is intended to cove

17、r the provisions of article 3.2 of Directive 1999/5/EC i (R Short Range Devices (SRD); Automatic Vehicle Identification (AVI) for railways operating in the 2,45 GHz frequency range; Part 1: Technical characteristics and methods of measurement“. Pl 31 ETSI ETR 028: “Radio Equipment and Systems (RES);

18、 Uncertainties in the measurement of mobile radio equipment characteristics“. CEPT/ERC Recommendation T/R 70-03: “Relating to the use of Short Range Devices (SRD)“. Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of informati

19、on in the field of technical standards and regulations. 41 51 3 Definitions, symbols and abbreviations 3.1 Defi nit ions For the purposes of the present document, the terms and definitions given in the R or this test suite applies to transmitters with an integral or dedicated antenna. 5.1.3.2 Freque

20、ncy error The test specified in EN 300 761-1 2, clause 7.2.2, shall be carried out. This test suite applies to all transmitters. ETSI 11 Clause 4.2.1 ETSI EN 300 761-2 V1.l.l (2001-06) Performance requirement Clause on EN 300 761-1 2 containing the test method Co-channel reiection 8.3.3.2 5.1.3.3 Tr

21、ansmitter spectrum mask The test specified in EN 300 761-1 2, clause 7.3.2, shall be carried out. 4.2.2 4.2.3 5.1.3.4 Spurious emissions Either: - - the tests specified in EN 300 761-1 2, clause 7.6.3 and EN 300 761-1 2, clause 7.6.4, shall be carried out; or the test specified in EN 300 761-1 2, cl

22、ause 7.6.5, shall be carried out. Adjacent channel selectivity 8.3.4.2 Spurious response rejection 8.3.5.2 and desensitization 5.1.4 Receiver test suites 4.2.4 4.2.5 5.1.4.1 Spurious radiations Either: - - the tests specified in EN 300 761-1 2, clause 8.4.2 and EN 300 761-1 2, clause 8.4.3, shall be

23、 carried out; or the test specified in EN 300 761-1 2, clause 8.4.4, shall be carried out. Intermodulation response rejection 8.3.6.2 Spurious radiations 8.4.2 and 8.4.3; or 8.4.4 5.1.4.2 Trans ponder spurious rad iation The test specified in EN 300 761-1 2, clause 9.4.2, shall be carried out. 5.2 O

24、ther test specifications The requirements in clause 4.2 have been set on the assumption that the test specifications in table 1 will be used to veri6 the performance of equipment. Table 1 : Receiver test specifications 6 Interpretation of measurement results The interpretation of the results recorde

25、d in the test report for the measurements described in the present document shall be as follows: - the measured value related to the corresponding limit shall be used to decide whether an equipment meets the requirements of the present document; the value of the measurement uncertainty for the measu

26、rement of each parameter shall be separately included in the test report; the value of the measurement uncertainty shall be, for each measurement, equal to or lower than the figures in table 2. - - ETSI 12 ETSI EN 300 761-2 V1.l.l (2001-06) RF frequency RF power, conducted Adjacent channel power Con

27、ducted emission of transmitter, valid up to 12,75 GHz Conducted emission of receivers Table 2: Measurement uncertainty *I x 10-7 k4 dB k3 dB k4 dB +3 dB Radiated emission of transmitter, valid up to 12,75 GHz Radiated emission of receiver, valid up to 12,75 GHz 1k6 dB 1k6 dB For the test methods, ac

28、cording to the present document the uncertainty figures shall be calculated according to the methods described in the ETR 028 3 and shall correspond to an expansion factor (coverage factor) k = 1,96 or k = 2 (which provide confidence levels of respectively 95 % and 95,45 % in case where the distribu

29、tions characterizing the actual measurement uncertainties are normal (Gaussian). Table 2 is based on such expansion factors. The particular expansion factor used for the evaluation of the measurement uncertainty shall be stated. ETSI 13 ETSI EN 300 761-2 V1.l.l (2001-06) vl.l.l vl.l.l History July 2000 Public Enquiry PE 20001 124: 2000-07-26 to 2000-11-24 April 2001 Vote V 20010615: 2001-04-16 to 2001-06-15 I Document history I V1.l.l I June2001 I Publication ETSI