ETSI EN 300 392-10-6-2006 Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D) Part 10 Supplementary services stage 1 Sub-part 6 Call Authorized by Dispatcher (CAD) (V1 4 1)《陆地集_1.pdf

《ETSI EN 300 392-10-6-2006 Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D) Part 10 Supplementary services stage 1 Sub-part 6 Call Authorized by Dispatcher (CAD) (V1 4 1)《陆地集_1.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 300 392-10-6-2006 Terrestrial Trunked Radio (TETRA) Voice plus Data (V+D) Part 10 Supplementary services stage 1 Sub-part 6 Call Authorized by Dispatcher (CAD) (V1 4 1)《陆地集_1.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 300 392-10-6 V1.4.1 (2006-08)European Standard (Telecommunications series) Terrestrial Trunked Radio (TETRA);Voice plus Data (V+D);Part 10: Supplementary services stage 1;Sub-part 6: Call Authorized by Dispatcher (CAD)ETSI ETSI EN 300 392-10-6 V1.4.1 (2006-08) 2 Reference REN/TETRA-03166 Ke

2、ywords air interface, stage 1, supplementary service, TETRA, V+D ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88

3、 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version

4、is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status.

5、 Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification

6、 No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2006. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the

7、 benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI EN 300 392-10-6 V1.4.1 (2006-08) 3 Conte

8、nts Intellectual Property Rights5 Foreword.5 Introduction 6 1 Scope 7 2 References 7 3 Definitions and abbreviations.7 3.1 Definitions7 3.2 Abbreviations .8 3.2.1 General abbreviations .8 3.2.2 Supplementary service abbreviations8 4 Supplementary Service Call Authorized by Dispatcher (SS-CAD) stage

9、1 specification9 4.1 Description .9 4.1.1 General description.9 4.1.2 Qualifications on applicability to telecommunication services.9 4.2 Procedures 9 4.2.1 Provision and withdrawal .9 4.2.1.1 Restricted basic service .10 4.2.1.2 Restricted destination address .10 4.2.1.3 Restricted source address 1

10、0 4.2.1.4 Restricted area.10 4.2.1.5 Verification and acceptance 11 4.2.2 Normal procedures11 4.2.2.1 Activation, deactivation, definition, registration, interrogation, and cancellation.11 4.2.2.1.1 Activation and deactivation.11 4.2.2.1.2 Definition.11 4.2.2.1.3 Registration .11 4.2.2.1.4 Interroga

11、tion 11 4.2.2.2 Invocation and operation.11 4.2.2.2.1 Outgoing calls11 4.2.2.2.2 Incoming calls .12 4.2.2.2.3 Restricted basic service .12 4.2.2.2.4 Restricted area .12 4.2.2.3 Cancellation 12 4.2.3 Exceptional procedures.12 4.2.3.1 Activation, deactivation, definition, registration, interrogation,

12、and cancellation.12 4.2.3.1.1 Activation 12 4.2.3.1.2 Deactivation.13 4.2.3.1.3 Definition.13 4.2.3.1.4 Registration .13 4.2.3.1.5 Interrogation 13 4.2.3.2 Cancellation 13 4.2.3.3 Invocation and operation.14 4.3 Interactions with supplementary services.14 4.3.1 Calling Line Identification Presentati

13、on (SS-CLIP) .14 4.3.2 Connected Line identification Presentation (SS-COLP).14 4.3.3 Calling/Connected Line Identification Restriction (SS-CLIR).14 4.3.4 Call Report (SS-CR) .14 4.3.5 Talking Party Identification (SS-TPI).14 4.3.6 Call Forwarding Unconditional (SS-CFU) .14 4.3.7 Call Forwarding on B

14、usy (SS-CFB) .14 4.3.8 Call Forwarding on No Reply (SS-CFNRy) .14 4.3.9 Call Forwarding on Not Reachable (SS-CFNRc) .14 4.3.10 List Search Call (SS-LSC)14 ETSI ETSI EN 300 392-10-6 V1.4.1 (2006-08) 4 4.3.11 Call Authorized by Dispatcher (SS-CAD)14 4.3.12 Short Number Addressing (SS-SNA) .15 4.3.13 A

15、rea Selection (SS-AS) 15 4.3.14 Access Priority (SS-AP) .15 4.3.15 Priority Call (SS-PC) 15 4.3.16 Call Waiting (SS-CW)15 4.3.17 Call Hold (SS-HOLD) 15 4.3.18 Call Completion to Busy Subscriber (SS-CCBS) .15 4.3.19 Late Entry (SS-LE) .15 4.3.20 (Void)16 4.3.21 Pre-emptive Priority Call (SS-PPC)16 4.

16、3.22 Include Call (SS-IC) .16 4.3.23 (Void)16 4.3.24 Barring of Outgoing Calls (SS-BOC) .16 4.3.25 Barring of Incoming Calls (SS-BIC) 16 4.3.26 Discreet Listening (SS-DL) 16 4.3.27 Ambience Listening (SS-AL) .16 4.3.28 Dynamic Group Number Assignment (SS-DGNA)16 4.3.29 Call Completion on No Reply (S

17、S-CCNR) 16 4.3.30 Call Retention (SS-CRT)17 4.4 Interworking considerations .17 4.5 Overall SDL .17 Annex A (informative): Change Requests19 History 20 ETSI ETSI EN 300 392-10-6 V1.4.1 (2006-08) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have b

18、een declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards

19、“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other I

20、PRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Terrestrial Trunked Radio (TETRA). The prese

21、nt document is part 10, sub-part 6 of a multipart deliverable covering the Voice plus Data (V+D), as identified below: EN 300 392-1: “General network design“; EN 300 392-2: “Air Interface (AI)“; EN 300 392-3: “Interworking at the Inter-System Interface (ISI)“; ETS 300 392-4: “Gateways basic operatio

22、n“; EN 300 392-5: “Peripheral Equipment Interface (PEI)“; EN 300 392-7: “Security“; EN 300 392-9: “General requirements for supplementary services“; EN 300 392-10: “Supplementary services stage 1“; EN 300 392-10-1: “Call Identification (CI)“; ETS 300 392-10-2: “Call report“; ETS 300 392-10-3: “Talki

23、ng Party Identification (TPI)“; EN 300 392-10-4: “Call Forwarding (CF)“; ETS 300 392-10-5: “List Search Call (LSC)“; EN 300 392-10-6: “Call Authorized by Dispatcher (CAD)“; ETS 300 392-10-7: “Short number addressing“; EN 300 392-10-8: “Area Selection (AS)“; ETS 300 392-10-9: “Access priority“; EN 30

24、0 392-10-10: “Priority Call (PC)“; EN 300 392-10-11: “Call Waiting (CW)“; EN 300 392-10-12: “Call Hold (HOLD)“; ETS 300 392-10-13: “Call completion to busy subscriber“; EN 300 392-10-14: “Late Entry (LE)“; ETSI ETSI EN 300 392-10-6 V1.4.1 (2006-08) 6 ETS 300 392-10-15: “Transfer of control“; EN 300

25、392-10-16: “Pre-emptive Priority Call (PPC)“; EN 300 392-10-17: “Include Call (IC)“; EN 300 392-10-18: “Barring of Outgoing Calls (BOC)“; EN 300 392-10-19: “Barring of Incoming Calls (BIC)“; ETS 300 392-10-20: “Discreet Listening (DL)“; EN 300 392-10-21: “Ambience Listening (AL)“; EN 300 392-10-22:

26、“Dynamic Group Number Assignment (DGNA)“; ETS 300 392-10-23: “Call completion on no reply“; ETS 300 392-10-24: “Call Retention (CRT)“; EN 300 392-11: “Supplementary services stage 2“; EN 300 392-12: “Supplementary services stage 3“; ETS 300 392-13: “SDL model of the Air Interface (AI)“; ETS 300 392-

27、14: “Protocol Implementation Conformance Statement (PICS) proforma specification“; TS 100 392-15: “TETRA frequency bands, duplex spacings and channel numbering“; TS 100 392-16: “Network Performance Metrics“; TR 100 392-17: “TETRA V+D and DMO specifications“; TS 100 392-18: “Air interface optimized a

28、pplications“. NOTE: Part 10, sub-part 15 (Transfer of control), part 13 (SDL) and part 14 (PICS) of this multi-part deliverable are in status “historical“ and are not maintained. National transposition dates Date of adoption of this EN: 28 July 2006 Date of latest announcement of this EN (doa): 31 O

29、ctober 2006 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 30 April 2007 Date of withdrawal of any conflicting National Standard (dow): 30 April 2007 Introduction Supplementary services specifications are produced in three stages, according to the method descr

30、ibed in ITU-T Recommendation I.210 2. The present document contains the stage 1 specification of SS-CAD. The stage 1 descriptions specify the supplementary services as seen by users of networks. The Call Authorized by Dispatcher service is specific to TETRA. ETSI ETSI EN 300 392-10-6 V1.4.1 (2006-08

31、) 7 1 Scope The present document defines the stage 1 specifications of the Supplementary Service Call Authorized by Dispatcher (SS-CAD) for the Terrestrial Trunked Radio (TETRA) system. Stage 1 is an overall service description from the users point of view but does not deal with the details of the h

32、uman interface itself. The present document specifies the service description of the supplementary service and the procedures to be expected with successful and unsuccessful outcomes. In addition, the present document specifies the interactions with other TETRA supplementary services and interworkin

33、g considerations. Charging principles are outside the scope of the present document. The SS-CAD ensures that predefined TETRA calls do not proceed without first being authorized by a dispatcher. 2 References The following documents contain provisions which, through reference in this text, constitute

34、 provisions of the present document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents

35、 which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. 1 ITU-T Recommendation Z.100: “Specification and Description Language (SDL)“. 2 ITU-T Recommendation I.210: “Principles of telecommunication services supported by an ISDN and the

36、 means to describe them“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: authorized user: user who can make service definition NOTE: The authorized user can also activate/deactivate and interrogate the service. dis

37、patcher: user to whom the request for authorization is directed restricted user: user whose calls are forced to be authorized by a dispatcher before the call can proceed NOTE: The restricted user can be either the calling user A or the called user B or both. ETSI ETSI EN 300 392-10-6 V1.4.1 (2006-08

38、) 8 3.2 Abbreviations 3.2.1 General abbreviations For the purposes of the present document, the following general abbreviations apply: SDL (Functional) Specification and Description Language SS Supplementary Service NOTE: The abbreviation SS is only used when referring to a specific supplementary se

39、rvice. SwMI Switching and Management Infrastructure V+D Voice Plus Data 3.2.2 Supplementary service abbreviations For the purposes of the present document, the following supplementary service abbreviations apply: SS-AL Ambience Listening SS-AP Access Priority SS-AS Area SelectionSS-BIC Barring of In

40、coming Calls SS-BOC Barring of Outgoing Calls SS-CAD Call Authorized by Dispatcher SS-CCBS Call Completion to Busy Subscriber SS-CCNR Call Completion on No Reply SS-CFB Call Forwarding on Busy SS-CFNRy Call Forwarding on No Reply SS-CFNRc Call Forwarding on Not Reachable SS-CFU Call Forwarding Uncon

41、ditional SS-CLIP Calling Line Identification Presentation SS-CLIR Calling/Connected Line Identification Restriction SS-COLP Connected Line Identification Presentation SS-CR Call Report SS-CRT Call Retention SS-CW Call WaitingSS-DGNA Dynamic Group Number Assignment SS-DL Discreet Listening SS-HOLD Ca

42、ll Hold SS-IC Include CallSS-LE Late Entry SS-LSC List Search Call SS-PC Priority Call SS-PPC Pre-emptive Priority Call SS-SNA Short Number AddressingSS-TPI Talking Party Identification ETSI ETSI EN 300 392-10-6 V1.4.1 (2006-08) 9 4 Supplementary Service Call Authorized by Dispatcher (SS-CAD) stage

43、1 specification 4.1 Description 4.1.1 General description SS-CAD is defined as the ability of the dispatcher to verify and approve a call request before the call is allowed to proceed. The supplementary service shall also apply to the option whereby the dispatcher authorization of incoming call requ

44、ests to specified TETRA addresses is required before the service can proceed. The specified TETRA addresses may be TETRA users or gateways. The incoming calls may be generated inside or outside of the operators TETRA domain. The service shall enable interception of calls due to the following conditi

45、ons: 1) restricted basic service request; 2) restricted destination or source address; 3) restricted area. 4.1.2 Qualifications on applicability to telecommunication services SS-CAD shall be applicable to all TETRA speech and circuit mode data services. 4.2 Procedures 4.2.1 Provision and withdrawal

46、The SS-CAD supplementary service shall be provided by prior arrangement with the service provider. This service may be withdrawn by the service provider. Conditions for SS-CAD shall be defined and linked with the source, basic service request and destination of the call as shown in table 1. Table 1:

47、 Implementation options, authorization conditions Implementation options Source Basic service request Destination Restricted basic service Internal TETRA number Speech and circuit mode data services Internal TETRA number, External to TETRA Restricted destination address Internal TETRA number Speech

48、and circuit mode data services Internal TETRA number, External to TETRA Restricted destination address Other TETRA systems or gateways Supported services Internal TETRA number Restricted source address Internal TETRA number Speech and circuit mode data services Internal TETRA number, External to TET

49、RA Restricted source address Other TETRA systems or gateways Supported services Internal TETRA number Restricted area Internal TETRA number Speech and circuit mode data services Specified TETRA area ETSI ETSI EN 300 392-10-6 V1.4.1 (2006-08) 10As an implementation option, the calling user may receive information that the call is intercepted according to table 2. Table 2: Implementation options, interception information Implementation options Value Information to the calling user - No - Yes, without dispatchers number - Yes, with dispatchers number 4.2.1.1 Restric