EN ISO 20349-2-2017 en Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 2 Requirements and test methods for protection against risk.pdf

《EN ISO 20349-2-2017 en Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 2 Requirements and test methods for protection against risk.pdf》由会员分享，可在线阅读，更多相关《EN ISO 20349-2-2017 en Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 2 Requirements and test methods for protection against risk.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、Personal protective equipment - Footwear protecting against risks in foundries and weldingPart 2: Requirements and test methods for protection against risks in welding and allied processes (ISO 20349-2:2017)BS EN ISO 20349-2:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/

2、2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 20349-2 September 2017 ICS 13.340.50 Supersedes EN ISO 20349:2010English Version Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 2: Requirements and test methods for protection agains

3、t risks in welding and allied processes (ISO 20349-2:2017)quipement de protection individuelle - Chaussures de protection contre les risques dans les fonderies et lors doprations de soudage - Partie 2: Exigences et mthodes dessai pour la protection contre les risques lors doprations de soudage et te

4、chniques connexes (ISO 20349-2:2017) Persnliche Schutzausrstung - Schuhe zum Schutz gegen Risiken in Gieereien und beim Schweien - Teil 2: Anforderungen und Prfverfahren zum Schutz gegen Risiken beim Schweien und verwandten Verfahren (ISO 20349-2:2017) This European Standard was approved by CEN on 1

5、2 June 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be

6、obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to th

7、e CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ire

8、land, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Manag

9、ement Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 20349-2:2017 ENational forewordThis British Standard is the UK implementation of EN ISO 20349-2:2017. It is identical to ISO 2

10、0349-2:2017. Together with BS EN ISO 20349-1:2017, it supersedes BS EN ISO 20349:2010, which will be withdrawn on publication of BS EN ISO 20349-1:2017.The UK participation in its preparation was entrusted to Technical Committee PH/1, Safety, protective and occupational footwear.A list of organizati

11、ons represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN

12、 978 0 580 87313 3ICS 13.340.50Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2017.Amendments/corrigenda issued since publicationDate Text affected

13、BRITISH STANDARDBS EN ISO 203492:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 20349-2 September 2017 ICS 13.340.50 Supersedes EN ISO 20349:2010English Version Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 2: Requirements and test me

14、thods for protection against risks in welding and allied processes (ISO 20349-2:2017)quipement de protection individuelle - Chaussures de protection contre les risques dans les fonderies et lors doprations de soudage - Partie 2: Exigences et mthodes dessai pour la protection contre les risques lors

15、doprations de soudage et techniques connexes (ISO 20349-2:2017) Persnliche Schutzausrstung - Schuhe zum Schutz gegen Risiken in Gieereien und beim Schweien - Teil 2: Anforderungen und Prfverfahren zum Schutz gegen Risiken beim Schweien und verwandten Verfahren (ISO 20349-2:2017) This European Standa

16、rd was approved by CEN on 12 June 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such

17、 national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own

18、language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Gr

19、eece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE F

20、R NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 20349-2:2017 EBS EN ISO 203492:2017EN ISO 20349-2:2017 (E) 3 European foreword This document (EN IS

21、O 20349-2:2017) has been prepared by Technical Committee ISO/TC 94 “Personal safety - Protective clothing and equipment“ in collaboration with Technical Committee CEN/TC 161 “Foot and leg protectors” the secretariat of which is held by BSI. This European Standard shall be given the status of a natio

22、nal standard, either by publication of an identical text or by endorsement, at the latest by March 2018 and conflicting national standards shall be withdrawn at the latest by March 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rig

23、hts. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 20349:2010. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU

24、 Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bu

25、lgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switz

26、erland, Turkey and the United Kingdom. Endorsement notice The text of ISO 20349-2:2017 has been approved by CEN as EN ISO 20349-2:2017 without any modification. BS EN ISO 203492:2017EN ISO 20349-2:2017 (E) 4 ANNEX ZA (informative) Clauses of this European Standard addressing essential requirements o

27、r other provisions of EU directives 89/686/EEC Personal Protective Equipment aimed to be covered This This European Standard has been prepared under a Commissions standardization request M/031 Personal protective equipment to provide one voluntary means of conforming to essential requirements of the

28、 New Approach Directive 89/686/EEC Personal Protective Equipment. Once this standard is cited in the Official Journal of the European Union under that Directive 89/686/EEC, compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this stan

29、dard, a presumption of conformity with the corresponding essential requirements of that Directive 89/686/EEC, and associated EFTA regulations. Table ZA.1 Correspondence between this European Standard and EU Directive 89/686/EEC Personal Protective Equipment Essential Requirements of Directive 89/686

30、/EEC Clause(s)/sub-clause(s) of this EN Remarks/Notes 1.1 Ergonomics 7.1 EN ISO 20345:2011, 5.3.4 1.2 Innocuousness of PPE 7.5 1.4 Information supplied by the manufacturer 9 2.2 PPE enclosing the parts of the body to be protected EN ISO 20345:2011, 5.4.6, 5.5.3 2.4 PPE subject to ageing 7.3, 7.4 EN

31、ISO 20345:2011, 5.3.2.5, 6.4.1, 6.2.3.1, 6.2.3.2 and 5.4.8 2.12 PPE bearing one or more identification or recognition marks directly or indirectly relating to health and safety 8 3.1 Protection against mechanical impact EN ISO 20345:2011, 5.3.2, 6.2.4, 6.2.6 and 6.2.7 3.1.2.1 Prevention of falls due

32、 to slipping EN ISO 20345:2011, 5.3.5 3.2 Protection against (static) compression of part of the body EN ISO 20345:2011, 5.3.2.4, 6.2.1 and 6.2.4 3.3 Protection against physical injury (abrasion, perforation, cuts, bites) EN ISO 20345:2011, 6.2.1, 6.2.6, 6.2.7 and 6.2.8 3.6 Protection against heat 7

33、.3, 7.4 EN ISO 20345:2011, 6.2.3.1 BS EN ISO 203492:2017EN ISO 20349-2:2017 (E) 5 and/or fire and 6.4.1 3.7 Protection against cold EN ISO 20345:2011, 6.2.3.2 3.8 Protection against electric shock EN ISO 20345:2011, 6.2.2.3 WARNING 1 Presumption of conformity stays valid only as long as a reference

34、to this European Standard is maintained in the list published in the Official Journal of the European Union. Users of this standard should consult frequently the latest list published in the Official Journal of the European Union. WARNING 2 Other Union legislation may be applicable to the product(s)

35、 falling within the scope of this standard. ISO 20349-2:2017(E)Foreword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Classifications of footwear . 15 Sampling and conditioning 26 Requirements 27 Specific requirements . 47.1 Height of upper . 47.2 Upper design . 47.3 Small molten

36、 metal splash test . 57.4 Burning behaviour . 57.5 Innocuousness . 58 Marking 69 Information to be supplied by the manufacturer . 69.1 General . 69.2 Information regarding perforation resistant insert 89.3 Electrical properties . 89.3.1 Antistatic footwear 89.3.2 Electrically insulating footwear 89.

37、4 Insocks . 9Bibliography .10 ISO 2017 All rights reserved iiiContents PageBS EN ISO 203492:2017ISO 20349-2:2017(E)Foreword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Classifications of footwear . 15 Sampling and conditioning 26 Requirements 27 Specific requirements . 47.1 Hei

38、ght of upper . 47.2 Upper design . 47.3 Small molten metal splash test . 57.4 Burning behaviour . 57.5 Innocuousness . 58 Marking 69 Information to be supplied by the manufacturer . 69.1 General . 69.2 Information regarding perforation resistant insert 89.3 Electrical properties . 89.3.1 Antistatic

39、footwear 89.3.2 Electrically insulating footwear 89.4 Insocks . 9Bibliography .10 ISO 2017 All rights reserved iiiContents PageBS EN ISO 203492:2017ISO 20349-2:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member b

40、odies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental a

41、nd non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are d

42、escribed in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is d

43、rawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or o

44、n the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and exp

45、ressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.This document was prepared by the European Committee Standardizat

46、ion (CEN) Technical Committee CEN/TC 161, Foot and leg protectors in equipment, in collaboration with ISO Technical Committee TC 94 Personal safety Protective clothing and equipment, Subcommittee SC 3, Foot protection, in accordance with the agreement on technical cooperation between ISO and CEN (Vi

47、enna Agreement).This first edition of ISO 20349-2 cancels and replaces ISO 20349:2010, which has been technically revised.A list of all parts in the ISO 20349 series can be found on the ISO website.iv ISO 2017 All rights reservedBS EN ISO 203492:2017ISO 20349-2:2017(E)ForewordISO (the International

48、Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been esta

49、blished has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of I