EN ISO 16890-2-2016 en Air filters for general ventilation - Part 2 Measurement of fractional efficiency and air flow resistance《一般通风用空气过滤器第2部分 分级效率和空气流动阻力的测定(ISO 16890-2 2016)》.pdf

《EN ISO 16890-2-2016 en Air filters for general ventilation - Part 2 Measurement of fractional efficiency and air flow resistance《一般通风用空气过滤器第2部分 分级效率和空气流动阻力的测定(ISO 16890-2 2016)》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 16890-2-2016 en Air filters for general ventilation - Part 2 Measurement of fractional efficiency and air flow resistance《一般通风用空气过滤器第2部分 分级效率和空气流动阻力的测定(ISO 16890-2 2016)》.pdf（72页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN ISO 16890-2:2016Air filters for generalventilationPart 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2016)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO 16890-2:2016 BRITISH STANDARDNational forewordThis British Standar

2、d is the UK implementation of EN ISO 16890-2:2016. Together with BS EN ISO 16890-1:2016, BS EN ISO 16890-3:2016 and BS EN ISO 16890-4:2016 it supersedes BS EN 779:2012 and DD ISO/TS 21220:2009 which are withdrawn.The UK participation in its preparation was entrusted to Technical Committee MCE/21, Fi

3、lters for gases and liquids.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution

4、2016.Published by BSI Standards Limited 2016ISBN 978 0 580 80192 1 ICS 23.120; 91.140.30 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2016.Amendme

5、nts/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 16890-2 December 2016 ICS 91.140.30 Supersedes EN 779:2012English Version Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resist

6、ance (ISO 16890-2:2016) Filtres air de ventilation gnrale - Partie 2: Mesurage de lefficacit spectrale et de la rsistance lcoulement de lair (ISO 16890-2:2016) Luftfilter fr die allgemeine Raumlufttechnik - Teil 2: Ermittlung des Franktionsabscheidegrades und des Durchflusswiderstandes (ISO 16890-2:

7、2016) This European Standard was approved by CEN on 19 September 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliograph

8、ical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibilit

9、y of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of

10、 Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION

11、 EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 16890-2:2016 EBS EN ISO 16890-2:2016EN ISO 16890-2:2016 (E) 3 European forewo

12、rd This document (EN ISO 16890-2:2016) has been prepared by Technical Committee ISO/TC 142 “Cleaning equipment for air and other gases“ in collaboration with Technical Committee CEN/TC 195 “Air filters for general air cleaning” the secretariat of which is held by UNI. This European Standard shall be

13、 given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be withdrawn at the latest by June 2017. Attention is drawn to the possibility that some of the elements of this document may b

14、e the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 779:2012. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. Accor

15、ding to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,

16、 Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 16890-2:2016 has been approved by CEN as EN ISO 16890-2:2

17、016 without any modification. BS EN ISO 16890-2:2016ISO 16890-2:2016(E)Foreword viIntroduction vii1 Scope . 12 Normative references 13 Terms and definitions . 24 Symbols and abbreviated terms . 44.1 Symbols . 44.2 Abbreviated terms . 65 General test requirements . 65.1 Test device requirements . 65.

18、2 Test device installation 65.3 Test rig requirements 66 Test materials 76.1 Liquid phase aerosol 76.1.1 DEHS test aerosol 76.1.2 DEHS/DES/DOS - formula . 76.1.3 DEHS properties . 76.1.4 Liquid phase aerosol generation 76.2 Solid phase aerosol 86.2.1 Potassium chloride (KCl) test aerosol . 86.2.2 KC

19、l - formula 86.2.3 KCl properties . 86.2.4 Solid phase aerosol generation . 96.3 Reference aerosols 106.3.1 Reference aerosol for 0,3 m to 1,0 m 106.3.2 Reference aerosol for 1,0 m to 10,0 m .106.3.3 Other reference aerosols 106.3.4 Matching criteria .116.4 Aerosol loading 117 Test equipment117.1 Te

20、st rig . 117.1.1 Dimensions 117.1.2 Construction materials 127.1.3 Test rig shape .127.1.4 Test rig air supply .137.1.5 Test rig isolation 137.1.6 D/S mixing orifice 137.1.7 Aerosol sampling 147.1.8 Test rig air flow rate measurement .167.1.9 Resistance to air flow measurement .167.1.10 Non 610 mm 6

21、10 mm (24,0 inch 24,0 inch) test devices .177.1.11 Dust injection testing 187.2 Aerosol particle counter 187.2.1 General. 187.2.2 OPC sampled size range 187.2.3 OPC particle size ranges . 187.2.4 Sizing resolution197.2.5 Calibration 197.2.6 Air flow rate 197.2.7 Zero counting .197.2.8 Dual OPC(s) .

22、197.3 Temperature, relative humidity. 20 ISO 2016 All rights reserved iiiContents PageBS EN ISO 16890-2:2016ISO 16890-2:2016(E)8 Qualification of test rig and apparatus .208.1 Schedule of qualification testing requirements . 208.1.1 General. 208.1.2 Qualification testing .208.1.3 Qualification docum

23、entation 208.2 Qualification testing 218.2.1 Test rig Pressure system testing 218.2.2 OPC Air flow rate stability test 228.2.3 OPC Zero test .228.2.4 OPC Sizing accuracy 238.2.5 OPC Overload test .238.2.6 Aerosol generator Response time .248.2.7 Aerosol generator Neutralizer . 248.2.8 Test rig Air l

24、eakage test 258.2.9 Test rig Air velocity uniformity . 268.2.10 Test rig Aerosol uniformity . 278.2.11 Test rig Downstream mixing . 288.2.12 Test rig Empty test device section pressure 298.2.13 Test rig 100 % efficiency test and purge time 308.2.14 Test rig Correlation ratio 308.3 Maintenance . 308.

25、3.1 General. 308.3.2 Test rig Background counts 318.3.3 Test rig Reference filter test . 328.3.4 Test rig Pressure reference test 338.3.5 Test rig Final filter resistance .339 Test methods 339.1 Air flow rate 339.2 Measurement of resistance to air flow 339.3 Measurement of fractional efficiency . 33

26、9.3.1 Aerosol sampling protocol . 339.3.2 Background sampling .339.3.3 Testing sequence for a single OPC349.3.4 Testing sequence for dual OPC testing .3610 Data reduction and calculations .3810.1 Correlation ratio . 3810.1.1 Correlation ratio general 3810.1.2 Correlation ratio data reduction . 3810.

27、2 Penetration and fractional efficiency 4010.2.1 Penetration and fractional efficiency general 4010.2.2 Penetration data reduction 4010.3 Data quality requirements . 4310.3.1 Correlation background counts . 4310.3.2 Efficiency background counts . 4310.3.3 Correlation ratio 4310.3.4 Penetration 4410.

28、4 Fractional efficiency calculation . 4411 Reporting results 4511.1 General 4511.2 Required reporting elements 4511.2.1 Report general 4511.2.2 Report values . 4511.2.3 Report summary .4511.2.4 Report details 47Annex A (informative) Example 50Annex B (informative) Resistance to air flow calculation5

29、7iv ISO 2016 All rights reservedBS EN ISO 16890-2:2016ISO 16890-2:2016(E)Bibliography .59 ISO 2016 All rights reserved vBS EN ISO 16890-2:2016ISO 16890-2:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies)

30、. The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non

31、-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are describ

32、ed in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to t

33、he possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO

34、 list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as w

35、ell as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.The committee responsible for this document is ISO/TC 142, Cleaning equipment for air and other gases.This first edit

36、ion of ISO 16890-2, together with ISO 16890-1, ISO 16890-3 and ISO 16890-4, cancels and replaces ISO/TS 21220:2009, which has been technically revised.ISO 16890 consists of the following parts, under the general title Air filters for general ventilation: Part 1: Technical specifications, requirement

37、s and classification system based upon particulate matter efficiency (ePM) Part 2: Measurement of fractional efficiency and air flow resistance Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured Part 4: Conditioning method to determi

38、ne the minimum fractional test efficiencyvi ISO 2016 All rights reservedBS EN ISO 16890-2:2016ISO 16890-2:2016(E)IntroductionThe effects of particulate matter (PM) on human health have been extensively studied in the past decades. The results are that fine dust can be a serious health hazard, contri

39、buting to or even causing respiratory and cardiovascular diseases. Different classes of particulate matter can be defined according to the particle size range. The most important ones are PM10, PM2,5and PM1. The U.S. Environmental Protection Agency (EPA), the World Health Organization (WHO) and the

40、European Union define PM10as particulate matter which passes through a size-selective inlet with a 50 % efficiency cut-off at 10 m aerodynamic diameter. PM2,5and PM1are similarly defined. However, this definition is not precise if there is no further characterization of the sampling method and the s

41、ampling inlet with a clearly defined separation curve. In Europe, the reference method for the sampling and measurement of PM10is described in EN 12341. The measurement principle is based on the collection on a filter of the PM10fraction of ambient particulate matter and the gravimetric mass determi

42、nation (see EU Council Directive 1999/30/EC of 22 April 1999).As the precise definition of PM10, PM2,5and PM1is quite complex and not simple to measure, public authorities, like the U.S. EPA or the German Federal Environmental Agency (Umweltbundesamt), increasingly use in their publications the more

43、 simple denotation of PM10as being the particle size fraction less or equal to 10 m. Since this deviation to the above mentioned complex “official” definition does not have a significant impact on a filter elements particle removal efficiency, the ISO 16890 series refers to this simplified definitio

44、n of PM10, PM2,5and PM1.Particulate matter in the context of the ISO 16890 series describes a size fraction of the natural aerosol (liquid and solid particles) suspended in ambient air. The symbol ePMxdescribes the efficiency of an air cleaning device to particles with an optical diameter between 0,

45、3 m and x m. The following particle size ranges are used in the ISO 16890 series for the listed efficiency values.Table 1 Optical particle diameter size ranges for the definition of the efficiencies , ePMxEfficiency Size range, mePM100,3 10ePM2,50,3 2,5ePM10,3 1Air filters for general ventilation ar

46、e widely used in heating, ventilation and air-conditioning applications of buildings. In this application, air filters significantly influence the indoor air quality and, hence, the health of people, by reducing the concentration of particulate matter. To enable design engineers and maintenance pers

47、onnel to choose the correct filter types, there is an interest from international trade and manufacturing for a well-defined, common method of testing and classifying air filters according to their particle efficiencies, especially with respect to the removal of particulate matter. Current regional

48、standards are applying totally different testing and classification methods which do not allow any comparison with each other, and thus hinder global trade with common products. Additionally, the current industry standards have known limitations by generating results which often are far away from fi

49、lter performance in service, i.e. overstating the particle removal efficiency of many products. With this new ISO 16890 series, a completely new approach for a classification system is adopted, which gives better and more meaningful results compared to the existing standards.The ISO 16890 series describes the equipment, materials, technical specifications, requirements, qualifications and procedures to produce the laboratory performance data and efficiency classification based upon t