EN ISO 15614-11-2002 en Specificationa and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Test - Part 11 Electron and Laser Beam Welding《金属材料焊接程序的规范.pdf

《EN ISO 15614-11-2002 en Specificationa and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Test - Part 11 Electron and Laser Beam Welding《金属材料焊接程序的规范.pdf》由会员分享，可在线阅读，更多相关《EN ISO 15614-11-2002 en Specificationa and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Test - Part 11 Electron and Laser Beam Welding《金属材料焊接程序的规范.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、bpecii-ication and qualification of welding procedures for metallic materials Welding procedure te s t Part 11: Electron and laser beam welding The European Standard EN IS0 15614-1 1:2002 has the status of a British Standard ICs 25.160.10 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPY

2、RIGHT LAW BS EN IS0 15614-1 112002 BS EN IS0 15614-1112002 Amd. No. National foreword Date Comments This British Standard, having been prepared under the direction of the Engineering Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committe

3、e on 28 March 2002 This British Standard is the official English language version of EN IS0 15614-11:2002. It is identical with IS0 15614-11:2001. The UKparticipation in its preparation was entrusted to Technical Committee WEE/36, Approval testing ofwelding procedures and welders, which has the resp

4、onsibility to: - - aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of

5、organizations represented on this committee can be obtained on request to its secretary. Cr oss-r e fer enc e s The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “Internatio

6、nal Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a Briti

7、sh Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN IS0 title page, pages 2 to 28, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the docu

8、ment was last issued. Amendments issued since publication O BSI 28 March 2002 ISBN O 580 37646 X EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IS0 15614-11 March 2002 ICs 25.160.10 English version Specification and qualification of welding procedures for metallic materials - Welding procedure

9、 test - Part 11 : Electron and laser beam welding (IS0 15614-1 1 :2002) Descriptif et qualification dun mode opratoire de soudage pour les matriaux mtalliques - Epreuve de qualification dun mode opratoire - Partie 11 : Soudage par faisceau dlectrons et par faisceau laser (IS0 15614-1 1:2002) Anforde

10、rung und Qualifizierung von Schweiverfahren fr metallische Werkstoffe - Schweiverfahrensprfung - Teil 11: Elektronen- und Laserstrahlschweien (IS0 15614- 11 :2002) This European Standard was approved by CEN on 2 May 2001 CEN members are bound to comply with the CENKENELEC Internal Regulations which

11、stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard

12、 exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards

13、bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION EUROPISCHES KOMITEE FR NORMUNG COMIT EUROPEN DE NORM

14、ALISATION Management Centre: rue de Stassart, 36 B-1050 Brussels O 2002 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN IS0 15614-11:2002 E EN IS0 15614-112002 Contents Foreword 3 Introduction . 4 1 2 3 4 5 6 6.1 6.2 6.3 7 7.1 7.2

15、7.3 7.4 7.5 8 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 8.10 8.1 1 8.12 8.13 8.14 8.15 9 Scope 5 Normative references 5 Terms and definitions 6 Welding procedure specification (WPS) 6 Welding procedure test . 6 Test piece 6 General 6 Shape and dimensions of test pieces 6 Welding of test pieces . Examinati

16、on and testing . 11 Extent of examination and testing . 11 Location and cutting of test specimens 14 Non-destructive examination 18 Destructive tests 18 Re-testing 20 Range of qualification . 20 General 20 Related to the manufacturer . 20 Related to the equipment 20 Related to the jigs, fixtures and

17、 tooling 20 Related to the parent material 20 Related to the filler materials 21 Related to the joint geometry . 21 Related to the presence of a weld backing . 21 Related to the welding position 22 Related to the welding parameters 22 Related to preheating 22 Related to the number of passes . 22 Dur

18、ation of validity 22 Related to the weld type 21 Related to post weld heat treatment 22 Welding Procedure Qualification Record (WPQR) . 22 Annex A (informative) Welding Procedure Qualification Record form (WPQR) 23 Annex ZA (normative) List of IS0 corresponding standards to European Standards given

19、in clause 2 . 27 Annex ZB (informative) Clauses of this European Standard addressing essential requirements or other provisions of EU directives . 28 2 EN IS0 15614-112002 Foreword The text of EN IS0 15611:2002 has been prepared by Technical Committee CEN/TC 121 “Welding“, the secretariat of which i

20、s held by DS, in collaboration with Technical Committee ISO/TC 44 “Welding and allied processes“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2002, and conflicting national standards

21、 shall be withdrawn at the latest by September 2002. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informativ

22、e annex ZB, which is an integral part of this standard. Annexes A and ZB are informative. The annex ZA is normative. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czec

23、h Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. 3 EN IS0 15614-112002 Introduction Qualification of welding procedures serves to demonstrate that production operations

24、 fully comply with the agreed welding procedure including preliminary and subsequent treatment. Before a particular welding procedure is used in a production operation, the manufacturer should determine and document the suitability of the Welding Procedure Specification (WPS) to produce a weld of th

25、e required quality. To date the suitability of welding procedures has been established for weldments as part of the quality assurance activity. Until now, establishing the suitability of welding procedures by weld procedure testing was carried out and documented only for weldments involving safety a

26、nd the public interest. The European harmonisation of the provision for welding procedure tests is currently being sought by means of European Standards. In this way greater confidence will be generated for the customer by the manufacturer. The proofs also serve as the basis for the mutual recogniti

27、on of performance reached by the relevant authorities. In this standard, the term “welding procedure“ comprises all the activities which influence the welding result, such as preparation, welding parameters, post treatment and reworking. 4 EN IS0 15614-112002 1 Scope This European Standard specifies

28、 how a welding procedure specification for electron or laser beam welding is qualified by a welding procedure test. This standard is a part of a series of standards, details of this series are given in prEN IS0 15607, annex A. It defines the conditions for the execution of welding procedure qualific

29、ation tests and the limits of validity of a qualified welding procedure for all practical welding operations within the range of variables listed in clause 8. Tests shall be carried out in accordance with this standard together with additional tests when specified. This standard applies to metallic

30、materials, irrespective of the shape of the parts, their thicknesses, manufacturing method (rolling, forging, casting, sintering, etc.) and their heat treatment. It covers unlimitedly the production of new parts and repair work. 2 Normative references This European Standard incorporates by dated or

31、undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only w

32、hen incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 571-1, Non destructive testing - Penetrant testing - Part I : General principles. EN 895, Destructive tests on welds in metallic materials - Tr

33、ansverse tensile test. EN 91 O, Destructive tests on welds in metallic materials - Bend tests. EN 970, Non-destructive examination of fusion welds - Visual examination. EN 1043-2, Destructive test on welds in metallic materials - Hardness test - Part 2: Micro hardness testing on welded joints. EN 12

34、90, Non-destructive examination of welds - Magnetic particle examination of welds. EN 1321, Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds. EN 1435, Non-destructive examination of welds - Radiographic examination of welded joints. EN 1 7 14, Non d

35、estructive examination of welds - Ultrasonic examination of welded joints. EN IS0 6947, Welds - Working positions - Definitions of angles of slope and rotation (IS0 6947:1993). prEN IS0 15607, Specification and approval of welding procedures for metallic materials - General rules (ISO/DIS I560 7:ZOO

36、O). prEN IS0 15609-3:2000, Specification and approval of welding procedures for metallic materials - Welding procedure specification - Part 3: Electron beam welding (ISO/DIS 15609-3:ZOOO). prEN IS0 15609-4:2000, Specification and approval of welding procedures for metallic materials - Welding proced

37、ure specification - Part 4: Laser beam welding (ISO/DIS 15609-4:ZOOO). EN IS0 1391 9-1, Welding - Electrons and laser beam welded joints - Guidance on quality levels for imperfections - Part I: Steel (IS0 13919-1:1996). prEN IS0 1391 9-2, Welding - Electron and laser beam welded joints - Guidance on

38、 quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO/FDIS 13919-2: 1999). 5 EN IS0 15614-112002 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in prEN IS0 15607, prEN IS0 15609-3 and prEN IS0 15609-4 apply. 4 Welding

39、procedure specification (WPS) A pWPS (preliminary welding procedure specification) shall be prepared in accordance with prEN IS0 15609-3 for electron beam welding and prEN IS0 15609-4 for laser beam welding. It shall specify the tolerances for all the relevant parameters. A WPS shall be classified a

40、s pWPS until it is qualified in accordance with this standard. The welding procedure specification (WPS) shall give details on how a welding operation is to be performed, including tacking and fixturing. 5 Welding procedure test The manufacture and testing of test pieces shall be in accordance with

41、clauses 6 and 7 of this standard. In order to take into account the service performance needs of the products, the qualification may be made according to any of the acceptance levels B, C or D as defined in EN IS0 13919-1 for steels or in prEN IS0 13919- 2 for aluminium and its alloys. The quality l

42、evel necessary in each case should be specified by the application standard or the responsible designer. 6 Test piece 6.1 General The assembly to which the electron or laser beam welding procedure applies in production may be represented by one or more standardized test pieces as defined in 6.2. 6.2

43、 Shape and dimensions of test pieces The test pieces shall be of sufficient size to ensure an adequate heat distribution and for the application of non- destructive and/or destructive tests. The test piece shall be designed to represent, as far as possible, the component and joint geometry and shall

44、 be specified. One or more additional test pieces or a longer test piece than the minimum size, may be used in order to allow for extra and/or for re-testing specimens, according to 7.5. For plate material, the principal direction of rolling shall be marked on the test piece, if requested by the app

45、lication standard or the specification. The thickness and/or pipe outside diameter of the test pieces shall be selected in accordance with 8.5.2.1 to 8.5.2.2. Unless otherwise specified, the shape and minimum dimensions of the test piece shall be as defined hereafter. Nonetheless, the length of the

46、test piece shall be such as to permit the appropriate number of test specimens (as given in Tables 1 to Table 3) to be prepared. 6 EN IS0 15614-112002 6.2.1 Linear butt weld The test piece shall be in accordance with Figure 1 a P a Key 1 Edae DreDaration and fit-up as detailed in the preliminary Wel

47、ding Procedure Specification (pWPS) a = 3 x 7; minimum value 150 mm b = 6 x t ; minimum value 300 mm t = thickness of the thinner material in a dissimilar thickness joint Figure 1 - Test piece for a linear butt weld 7 EN IS0 15614-112002 6.2.2 Circular butt weld The test piece shall be in accordance

48、 with Figures 2 a) or 2 b). When small pipe diameters are used, several test pieces may be necessary. In cases where the diameter, D, of the part is greater than 150 mm and D 20 t, the qualification of the procedure may be achieved by welding a linear test piece. The test shall be designed to incorp

49、orate the weld overlap and slope down areas. NOTE The word pipe is used to mean “pipe“, “tube“ or “hollow section“. 6.2.2.1 Radial butt weld in pipe (in accordance with Figure 2 a) 6.2.2.2 Axial weld in pipe to pipe or pipe to plate (in accordance with Figure 2 b) P J Key 1 a= 3 x t; minimum value 150 mm D = outside dimension of the pipe t = wall thickness of the thinner pipe in a dissimilar thickness joint Edge preparation and fit-up as detailed in the preliminary Welding Procedure Specification (pWPS) a) Test piece for a radial butt weld in pipe 8 EN IS0 15614-1120