EN ISO 14021-2016 en Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling)《环境标志和声明 自我环境声明(II型环境标志)》.pdf

《EN ISO 14021-2016 en Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling)《环境标志和声明 自我环境声明(II型环境标志)》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 14021-2016 en Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling)《环境标志和声明 自我环境声明(II型环境标志)》.pdf（38页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN ISO 14021:2016Environmental labels anddeclarations Self-declaredenvironmental claims (Type IIenvironmental labelling) (ISO14021:2016)BS EN ISO 14021:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO14021:2016. It supersedes

2、BS EN ISO 14021:2001+A1:2011 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee SES/1/3, Environmental Management - Environmentallabelling.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does

3、 not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 86959 4ICS 13.020.50Compliance with a British Standard cannot confer immunity fromlegal ob

4、ligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2016.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 14021 April 2016 ICS 13.020.50 Supersedes EN ISO 14021:2001En

5、glish Version Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016) Marquage et dclarations environnementaux - Autodclarations environnementales (tiquetage de type II) (ISO 14021:2016) Umweltkennzeichnungen und -deklarationen -

6、Umweltbezogene Anbietererklrungen (Umweltkennzeichnung Typ II) (ISO 14021:2016) This European Standard was approved by CEN on 20 January 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a na

7、tional standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A v

8、ersion in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus

9、, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingd

10、om. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1402

11、1:2016 EBS EN ISO 14021:2016EN ISO 14021:2016 (E) 3 European foreword This document (EN ISO 14021:2016) has been prepared by Technical Committee ISO/TC 207 “Environmental management“. This European Standard shall be given the status of a national standard, either by publication of an identical text

12、or by endorsement, at the latest by October 2016, and conflicting national standards shall be withdrawn at the latest by October 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsibl

13、e for identifying any or all such patent rights. This document supersedes EN ISO 14021:2001. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards orga

14、nizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,

15、 Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 14021:2016 has been approved by CEN as EN ISO 14021:2016 without any modification. BS EN ISO 14021:2016ISO 14021:2016(E)Foreword v

16、Introduction vi1 Scope . 12 Normative references 13 Terms and definitions . 13.1 General terms . 13.2 Selected terms commonly used in self-declared environmental claims . 44 Objective of self-declared environmental claims . 45 Requirements applying to all self-declared environmental claims. 45.1 Gen

17、eral . 45.2 Relationship to ISO 14020 55.3 Vague or non-specific claims. 55.4 Claims of “. free” . 55.5 Claims of sustainability 55.6 Use of explanatory statements 55.7 Specific requirements . 55.8 Use of symbols to make environmental claims . 65.9 Other information or claims 75.10 Specific symbols

18、. 75.10.1 General 75.10.2 The Mobius loop . 76 Evaluation and claim verification requirements 86.1 Responsibilities of the claimant . 86.2 Reliability of evaluation methodology 86.3 Evaluation of comparative claims . 86.4 Selection of methods 96.5 Access to information 97 Specific requirements for s

19、elected claims 107.1 General 107.2 Compostable 107.2.1 Usage of term . 107.2.2 Qualifications .107.2.3 Evaluation methodology 117.3 Degradable . 117.3.1 Usage of term . 117.3.2 Qualifications .117.3.3 Evaluation methodology 127.4 Designed for disassembly . 127.4.1 Usage of term . 127.4.2 Qualificati

20、ons .127.4.3 Evaluation methodology 137.5 Extended life product . 137.5.1 Usage of term . 137.5.2 Qualifications .137.5.3 Evaluation methodology 137.6 Recovered energy 137.6.1 Usage of term . 137.6.2 Qualifications .137.6.3 Evaluation methodology 147.7 Recyclable . 147.7.1 Usage of term . 147.7.2 Qu

21、alifications .14 ISO 2016 All rights reserved iiiContents PageBS EN ISO 14021:2016ISO 14021:2016(E)7.7.3 Use of a symbol.147.7.4 Evaluation methodology 157.8 Recycled content . 157.8.1 Usage of terms .157.8.2 Qualifications .167.8.3 Use of a symbol.167.8.4 Evaluation methodology 167.9 Reduced energy

22、 consumption 177.9.1 Usage of term . 177.9.2 Qualifications .177.9.3 Evaluation methodology 177.10 Reduced resource use 177.10.1 Usage of term . 177.10.2 Qualifications .177.10.3 Evaluation methodology 187.11 Reduced water consumption . 187.11.1 Usage of term . 187.11.2 Qualifications .187.11.3 Eval

23、uation methodology 187.12 Reusable and refillable 197.12.1 Usage of terms .197.12.2 Qualifications .197.12.3 Evaluation methodology 197.13 Waste reduction 207.13.1 Usage of term . 207.13.2 Qualifications .207.13.3 Evaluation methodology 207.14 Renewable material . 207.14.1 Usage of term . 207.14.2 Q

24、ualifications .207.14.3 Evaluation methodology 217.15 Renewable energy . 217.15.1 Usage of term . 217.15.2 Qualifications .217.15.3 Evaluation methodology 217.16 Sustainable 217.16.1 Usage of term . 217.17 Claims relating to greenhouse gas emissions 217.17.1 General. 217.17.2 Product “carbon footpri

25、nt” 227.17.3 “Carbon neutral” 22Annex A (informative) Simplified diagrammatic representation of a recycling system 23Bibliography .24iv ISO 2016 All rights reservedBS EN ISO 14021:2016ISO 14021:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of natio

26、nal standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Internati

27、onal organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended

28、 for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org

29、/directivesAttention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in

30、the Introduction and/or on the ISO list of patent declarations received. www.iso.org/patentsAny trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to

31、 conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 207, Environmental management, Subcommittee SC 3, Enviro

32、nmental labelling.This second edition cancels and replaces the first edition (ISO 14021:1999), of which it constitutes a minor revision. It also incorporates the Amendment ISO 14021:1999/Amd 1:2011. ISO 2016 All rights reserved vBS EN ISO 14021:2016ISO 14021:2016(E)IntroductionThe proliferation of e

33、nvironmental claims has created a need for environmental labelling standards which require that consideration be given to all relevant aspects of the life cycle of the product when such claims are developed.Self-declared environmental claims may be made by manufacturers, importers, distributors, ret

34、ailers or anyone else likely to benefit from such claims. Environmental claims made in regard to products may take the form of statements, symbols or graphics on product or package labels, or in product literature, technical bulletins, advertising, publicity, telemarketing, as well as digital or ele

35、ctronic media, such as the Internet.In self-declared environmental claims, the assurance of reliability is essential. It is important that verification is properly conducted to avoid negative market effects such as trade barriers or unfair competition, which can arise from unreliable and deceptive e

36、nvironmental claims. The evaluation methodology used by those who make environmental claims should be clear, transparent, scientifically sound and documented so that those who purchase or may potentially purchase products can be ensured of the validity of the claims.vi ISO 2016 All rights reservedBS

37、 EN ISO 14021:2016Environmental labels and declarations Self-declared environmental claims (Type II environmental labelling)1 ScopeThis International Standard specifies requirements for self-declared environmental claims, including statements, symbols and graphics, regarding products. It further des

38、cribes selected terms commonly used in environmental claims and gives qualifications for their use. This International Standard also describes a general evaluation and verification methodology for self-declared environmental claims and specific evaluation and verification methods for the selected cl

39、aims in this International Standard.This International Standard does not preclude, override, or in any way change, legally required environmental information, claims or labelling, or any other applicable legal requirements.2 Normative referencesThe following documents, in whole or in part, are norma

40、tively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 7000, Graphical symbols for use on equipment Registered sym

41、bolsISO 14020, Environmental labels and declarations General principlesISO/TS 14067, Greenhouse gases Carbon footprint of products Requirements and guidelines for quantification and communication3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1 G

42、eneral terms3.1.1biomassmaterial of biological origin, excluding material embedded in geological formations or transformed to fossilised material and excluding peatNote 1 to entry: This includes organic material (both living and dead) from above and below ground, e.g. trees, crops, grasses, tree lit

43、ter, algae, animals and waste of biological origin, e.g. manure.3.1.2co-producttwo or more products from the same unit processSOURCE: ISO 14040:2006, 3.10, modified3.1.3environmental aspectelement of an organizations activities or products that can interact with the environmentINTERNATIONAL STANDARD

44、 ISO 14021:2016(E) ISO 2016 All rights reserved 1BS EN ISO 14021:2016ISO 14021:2016(E)3.1.4environmental claimstatement, symbol or graphic that indicates an environmental aspect of a product, a component or packagingNote 1 to entry: An environmental claim may be made on product or packaging labels,

45、through product literature, technical bulletins, advertising, publicity, telemarketing, as well as through digital or electronic media such as the Internet.3.1.5environmental claim verificationconfirmation of the validity of an environmental claim using specific predetermined criteria and procedures

46、 with assurance of data reliability3.1.6environmental impactchange to the environment, whether adverse or beneficial, wholly or partially resulting from an organizations activities or products3.1.7explanatory statementexplanation which is needed or given so that an environmental claim can be properl

47、y understood by a purchaser, potential purchaser or user of the product3.1.8functional unitquantified performance of a product system for use as a reference unit in a life cycle assessment studySOURCE: ISO 14040:2006, 3.20, modified3.1.9greenhouse gasGHGgaseous constituent of the atmosphere, both na

48、tural and anthropogenic, that absorbs and emits radiation at specific wavelengths within the spectrum of infrared radiation emitted by the Earths surface, the atmosphere and cloudsNote 1 to entry: GHGs include, among others, carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O), hydrofluorocarbon

49、s (HFCs), perfluorocarbons (PFCs) and sulphur hexafluoride (SF6).Note 2 to entry: A list of recognized GHGs is provided by IPCC, Climate Change 2007: The Physical Science Basis, Chapter 2, Table 2.14.3.1.10life cycleconsecutive and interlinked stages of a product system, from raw material acquisition or generation from natural resources to final disposalSOURCE: ISO 14040:2006, 3.13.1.11material identificationwords, numbers or symbols used to designate composition of components of a product or packagingNote 1 to entry: A material identificat